Sealed Battery Box with Hose for Venting Outside Recommendation
I need a sealed box with a hose type vent I can vent out of the compartment I am mounting my battery in. It is going to be mounted in a utility area in the nose of a camper trailer. I no longer want to battery on the tongue. Will this work...
Options for Securing Harley-Davidson Motorcycle in Garage of Toy Hauler
Like many out there, I cannot bolt into the floor of my trailer. I do have 6 factory installed d-rings to strap down my bike. Since it will only be me doing this, I have concluded the bolt it on system appears to be the easiest best bet. Any...
Size of Tow Rax Folding Table part # TWSP45HFTA
I was wondering if the Tow-Rax Wall Mounted Folding Table - Aluminum - 45-1/2inch Long x 18-1/2inch Wide could be made i different sizes. Thanks | We only offer the Tow Rax Folding Table part # TWSP45HFTA in the one size of 45-1/2" Long x...
What Tool Holder do You Recommend for a 60" Tall x 35" Wide Garage Wall?
Looking for a tool holder for my garage. The space I want to mount it on is 60 inches tall x 35 inches wide. Do you have anything? | Definitely! For your 60 inches tall x 35 inches wide space in your garage, I recommend the Tow-Rax Aluminum...
Dimensions of Buttons in Tow-Rax Mounting Buttons Kit
The mounting buttons for tow-rax wall mounted folding table, look like they might be the item we need for another application. Is there any way you could get me the dimensions of the 3mm buttons so I could compare it to our drawing of what we...
Motorcycle Wheel Chock Recommendation that is Removable
Ive ordered three of the max tow wheel chocks to be used in my enclosed box trailer. It doesnt State anywhere in its description but by looking at the pictures it looks as if you can mount the wheel chocks and remove them from their mounting...
A-Frame Trailer Jack For Older Military Trailer
hi. do you know of any companies that make a 24 vdc trailer tongue jack? I have an old military truck n trailer Id like to set up with one. thanks | There are no 24 volt A-frame trailer jacks, they do require a 12-volt power source. So what...
Everything Needed for a 2006 Scion XB to Tow a Small Trailer Carrying a Motorcycle
I plan to use a hitch to haul either a 4X8 or 4X6 trailer for my motorcycle what receiver. What hardware come with this hitch and does the wiring kit for my Scion XB 2006 need and does the wiring have T connectors. Do I need anything else to...
Can etrailer Cargo Carrier for RV Bumper Carry Dirt Bikes
Would this rack be suitable for carrying a couple of dirt bikes. The weight would be somewhere around 400 pounds. | As far as weight capacity goes the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR has a 500 lb weight capacity so it can...
Recommended Hardware For Tow-Rax L-Track To Attach To Floor
What type bolt is use to secure this to the floor? What type of material is the stainless or steel or are the harden bolts if so what grade. Thank You | It really depends on what material of floor you are installing the Tow-Rax L-Track - Domed...
Will Tow-Rax Mounting Hardware For Wheel Chock Withstand The Weight Of A Harley
How much weight can these hold. Wanna use these for my steel deck trailer to secure my wheel chock for a Harley bagger. Will these be able to withstand the weight of the harley | Yes, the mounting hardware part # TWSPWFKM is designed to mount...
Will B&W Biker Bar Motorcycle Tie-Down System Work with Non-Harley Brand Motorcycles
What about other brands of bikes? Example 2001 Suzuki Intruder 1500 LC | The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 referenced in your question is designed specifically to mount to the dual round tube frame on the underside of the...
Can D-Ring of Trailer Attach to Wood Floor For Transporting Dirt Bikes
Hi - just purchased a used trailer at a good price. Its a 2013 Lark 7x14 double tandem enclosed trailer. Overall its in good shape but Id like to replace the interior wood. Would it deteriorate the integrity of the frame if I drilled all new...
Will the Motorcycle Wheel Chock Work with the Front Tire on a 2006 Harley Sportster 883
I have a 2006 Harley Sportster 883. The front tire measures about 4 inches in width. Will the TWSPWM work with this tire? I also have a 2009 Honda Rebel and the front tire measures 3.75 inches. Will it work with that one also? Thank You |...
Recommended Mounting Hardware for Tow-Rax Low-Profile Floor Track # TWSP72TA On Aluminum Trailer
Which aluminum screws or locking bolts type, length, etc would you recommend to secure the floor track to my 6x10 ft aluminum trailer. I have 5 molded hollow aluminum beams under the trailer bed and will try to tap into some of them? I am...
Options for Securing Motorcyle to Trailer
really like your site. Just bought a couple of things, but now Im needing a bit of help. I just bought a 2010 toyota rav4 and they put a hitch on it... rated to 3500lbs. The tongue weight is only 350lbs so I cant get a motorcycIe cargo hitch...
Tow-Rax Cup Holder # TWSP2CH Dimensions
Cam you please provide full dimensions of the cup holder including material thickness? I did not come across dimensions of the upper back plate - I will need this to see if it will fit my application for mounting. Thank you! | I went out to...
How To Mount The Tow-Rax Wheel Chock In The Bed Of A Pick Up Truck
can you get the studs for mounting in pick up | To mount the Tow-Rax Removable Wheel Chock # TWSPWC in the bed of your pick up you could use the Mounting Hardware for Tow-Rax Removable Wheel Chock - Multi-Surface # TWPH2770. This would require...
Mounting Hardware Recommendation for a Tow-Rax Chock part # TWSPWM
Can I order extra wood fasteners for the wheel chock TWSPWM ? I would like to have multiple locations to install the wheel chocks. | For additional mounting hardware for the Tow-Rax Chock part # TWSPWM you would want the part # TWPH2770. This...
Could Tow Rax Battery Box TWSP12B bolt to Side of Trailer Frame
I would like to mount a battery box to the side of a trailer tongue 3X3, square tubing. Would one of these be ridged enough to bolt directly to the side and hold a ~35 lb battery or would it require a frame underneath? | I'd use larger washers...
What Is Needed To Relocate The Tow-Rax Wall Mounted Folding Table?
THis product - Tow-Rax Wall Mounted Folding Table - Aluminum - 45-1/2inch Long x 18-1/2inch Wide inch says it has mounting buttons to move it to another location. I read reviews and it seems like you can put these button to other locations...
Short Lightweight Shelves For Enclosed Utility Trailer
Can we get the individual trays custom sized? I need smaller trays in length. No longer then 25. Is that possible? | I took a look at the Tow-Rax Utility Tray w/ Raised Sides # TWSP12AT that you mention, and while this shelf is not able to...
Floor Thickness Requirement for the Tow-Rax Wheel Chock Part # TWSPWM
For Item # TWSPWM, is there a requirement for the wooden floor thickness? My trailer floor is 3/4inch plywood. | When installing the Tow-Rax Removable Wheel Chock w/ Wood Screws part # TWSPWM there really isn't a set material thickness it needs...
Can TWSPWM Wheel Chock Be Attached to Oriented Strand Board
Can this be used with OSB flooring? | If you have some structure underneath to tie the # TWSPWFKW into, then yes but otherwise I'd fear that the fasteners would tear out pretty easily. I'd recommend using a good sided piece of 1/2 or 3/4 inch...
Filter Your Search
Contact and Help