Replacement Waste Valve for a 2008 Dutchmen Adirondack 31RL
I have a 2008 dutchman adirondack 31rl. Is this the correct waste valve? | Thanks for reaching out, Ryan! The Valterra Waste Valve Body # T1003PBC will work as long as you're replacing this on a 3" diameter waste valve that can be removed. I...
Recommended Hitch for a 2022 Volvo XC60 Recharge
Is the Stealth hitch available for my 2022 Volvo XC60 Recharge? If not, would you recommend the Draw Tite or Curt hitch? Thanks! | You will want to go with the Curt Hitch item # C92WR. There is no stealth hitch for the 2022 Volvo XC60 Recharge....
Replacement Trailer Hub and Drum and Brakes for AL-KO 8490 Axle
Need drum/brake assemblies including inner/outer bearings, seals, washer and grease cap for alko 8490. Do you have complete set of 4 with everything included? 5 x 4.5 10 inch x 2.25 | Based on what we could find, the AL-KO 8490 is a 3,500 lb...
Replacement 30 Amp Converter For Travel Trailer
I have a Dutchmans Adirondack 30RL and I need to replace the 30 amp converter. | While we have no way of knowing what converter is in a Dutchmen Adirondack trailer, you can use the following: - Progressive Dynamics 9300 Series RV Converter...
Why Can't Draw Tite Hitch 76194 be Used with Weight Distribution
Hi there, Trying to figure out why this hitch is not rated for use with a WDH? My Volvo owners manual ONLY states that WDH is not to be used with the factory Volvo hitch, which makes sense because it is an electrically articulated unit. Ive...
Trailer Hitch Recommendation for 2023 Volvo XC60 Recharge
I have a 2023 XC 60 Recharge and looking at the Curt C92WR and the Draw Tite 76194. From the instructions and videos, it appears that the Draw-Tite requires bending the bumper facia supports, while the Curt does not. Is this correct? Thanks, Bob...
Does 2024 Volvo XC60 Recharge Rear Bumper Fascia Need to Be Trimmed to Install a Hitch Receiver
Do you still have to hammer the fascia supports and trim the heat shield on the 2024 XC60 Recharge? You had to do it in your install video on a 2021 XC60 for this Draw-Tite Class 4, but you didnt have to on the Curt Class 3 when installed on...
Replacement Hub and Drum Assembly Recommendation for a 2007 Dutchmen Adirondack 31-RL
2007 Dutchmen Adirondack 31-RL with 4k al-ko axle it has a AL-KO Kober axle H352 656645 kg1818 What bearings, hub and seals are needed | The 10" diameter x 2-1/4" wide Dexter Trailer Hub and Drum Assembly # K08-426-91 is the only option we have...
Bike Rack Recommendation with Loading Ramp for Carrying 4-Bikes with Fenders
looking for suggestions on a 4 place platform bike rack. 2 townie 7d with fenders will be involved. my hopes were to find a platform style with a loading ramp. Anything that you have that will work? ie yakima stage 2, kuat , thule. Also weight...
Distance Behind Hitch Pin Hole Needed For Yakima OnRamp For 1-1/4 Inch Hitch
Does this rack fit the Volvo swing-away hitch adapter? This has a fairly short distance behind the hitch pin before it curves up - I had to cut off about a half inch off Yakima holdup hitch to fit it. Its a 1.25 class two hitch. I see some...
Correct Trailer Hitch Fit for a 2022 Volvo XC60 Recharge with Hands Free Liftgate
Also, the car has a motion sensor that opens and closes the rear door. | The correct trailer hitch receiver we offer for a 2022 Volvo XC60 Recharge is the Curt Trailer Hitch Receiver part # C92WR. This is a bolt-on trailer hitch which does not...
Filter Your Search
Contact and Help