Parts Needed to Tow a Trailer with a 2006 Saturn Vue
I have a Saturn Vue 2006, and I would like to tow a trailer. I need to know what all is needed. This Hidden Hitch does it come with a bulb connector so that the trailer hitch and slip right over or am I just to old fashion, and it doesnt work...
Will An Adapter Be Needed for a Convert-A-Ball Gooseneck Adapter to Attach to a Mor/Ryde Pin Box?
Looking to change to the gooseneck adapter on a 2015 Jayco Eagle with a mor ryde hitch box. What, if any, plate adapter would be recommended for this set up. Thanks | Good news! The # CAB-C5G will work well with your Mor/Ryde pin box without...
Is There a Reese Goose Box for Alliance RV Paradigm 310RL 5th Wheel Trailer
Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 - 16,000 lbs Item # RP94716 What is the measurement of bolt holes on same side center to center. my Alliance 310 measures 7. 1/2inch | I reached out to Lippert...
Are Fifth Wheel to Gooseneck Adapters All Bolt On Install
Does anyone make a 5th wheel to gooseneck adapter that not bolted. I want an adapter that I can use on more than one trailer | All of the fifth wheel to gooseneck hitch adapters like the # AM3100 and # CAB-C5G do require bolting to the pin box...
Can Convert-A-Ball Cushioned, Adjustable Ball Mount, # CAB-UM Be Used in the Rise or Drop Position
Can the horizontal part of the hitch the part that slides into the tow vehicles receiver, NOT the part that the ball is attached to be used safely in either position if you are using the hitch in a DROP POSITION? Lets say for simplicitys sake,...
How To Tighten Down The Convert-A-Ball Adapter Screws
What is the torque setting for the two bottom bolts on the bottom of the coupler where the red line is?? | The adjustment screws on the Convert-A-Ball Adapter part # CAB-C5G above the red line need to be tightened firmly but do not have a torque...
Could Convert a Ball Fifth Wheel Gooseneck Adapter be Used with Short Bed Truck
Will the convert a ball adapter work with short bed truck or do I need the offset one | The biggest downside to using a fifth wheel to gooseneck adapter like the # CAB-C5G is that you can't gain additional turning clearance when towing a short...
Can A Reese Goose Box Be Used With A Rhino Box Pin Box?
I am wanting to get a 20,000K Goose Box for our new Jayco Pinnacle which has a GVWR of 15,500 lbs. Is that overkill and I should go with a 16,000K? And then I want to see if I need any spacer kits or anything besides the Goose Box itself when...
What Gooseneck Ball for 2020 Ram 2500 OEM Rail Kit is fits with Convert-a-Ball 5th Wheel Adapter
I see that this will not work with the lever style ball that works with ram factory prep bed, will this work with the bandw ball for ram underbed factory setup | The Convert a Ball fifth wheel to gooseneck adapter part # CAB-C5G can be used...
Can a 5th Wheel Trailer be Towed by a 2012 Ram 3500 with Ram Box
I also have 2012 with the tool box cant make sharp corners or I hit the boxes My rv is 33ft 14000 lbs do u think this would work for me. thank you 2012 Dodge Ram 3500 Mega Cab with Ram Box | The problem that you are having is a common one that...
Recommendation for Moving Fifth Wheel Trailer One Time with a Short Bed Truck with Gooseneck
Ive got a 2006 dodge 2500 4x4 stock short bed with a gooseneck. I purchased a 1998 38 ft fifthwheel sea breeze that came with a trailboss 15 k hitch. -no rails. Do yall have an adapter that will work with gooseneck? I have owned a fifth wheel...
Measuring for the Right Amount of Drop to Tow a Trailer Level with a 2007 Jeep Grand Cherokee
I really appreciate your site and the information shared. So here is my question. I have a 2007 Jeep Grand Cherokee, stock tires, no lift with a tow package. Ive measure the top of the mount to be about 24inch from the ground. Got a small...
Carrying a Flint Hill Goods Mobility Scooter Carrier And Towing a Heavy Trailer at the Same Time
I purchased a Curt 30x50 mobility scooter carrier from you. Is there a 2 inch receiver extension with a drop/rise that will give me room and lift the carrier up? So I can carry the carrier on top and bottom for heavier towing. Plus when carrier...
Best Adapter for Towing a 5th Wheel Trailer with a Valley Gooseneck Hitch in a 2003 Dodge Ram 2500
I have a 2003 Dodge Ram 2500 with a Valley gooseneck hitch already installed. I want to by a trailer that has a 5th hookup. The trailer is about 9000 pounds. What Valley products do I need to purchase and how much does each cost? Also do you...
Ball Mount Recommendation for a 2016 Ford F-350 with 2-1/2 Inch Trailer Hitch
I have a 2016 Ford F350 diesel with a 2 1/2 inch receiver. My main trailer I will be towing is a 3 horse slant with a empty weight close to 4000 pounds. The measurement from level ground to the bottom edge of the trailer coupler is 17 1/2...
Recommended Off-Set Adapter For Youngs Welding 8 By 8 Pin Box On 1987 New Wall Snowbird SE102
We purchased the 1987 new wall Snowbird se102 with a Youngs Welding straight 8 by 8 Pin box what can we use to replace that that not only would give us the extension we need do too we have a short bed Ford F-350 and also going up into that pin...
Solution for Towing Fifth Wheel Trailer with 2015 Ram with Square Gooseneck Hole in Bed
Just bought 2015 Ram tradesman with 6.7 diesel and 8 foot bed. It is set up in back with a square hole to tow a gooseneck. I need to know best choice to use square hole for 5th wheel hitch. Wondering if there is any drilling required? I have...
How to Tow 5th Wheel Trailer with 2016 Ram 3500 and Demco UMS Rails
I’m looking to free up some bed space. Currently have Demco 21K Autoslide with the under rail kit DM8551006. I believe the Demco UMS gooseneck hitch DM5988 will fit right in. Would this work with the convert a ball fifth wheel adapter CAB-C5GX1216...
Recommended Trailer Hitch for 2015 Honda Odyssey for Towing Jet Ski Trailer
I am planning to prepare my 2015 odyssey this coming summer to tow jet ski possible 3 seater one recreational purpose. I like the design of this that is hidden behind the bumper. I was wondering whether this is part is the good one to buy....
What Size Wrench/Socket Needed to Torque Nut of Convert a Ball part # 906B
What is the socket size for the nut on the Convert-a-ball 906B 2/ 2 5/16, 1inch shank? Thanks | The size wrench you would need to tighten the nut of the Convert a Ball part # 906B is 1 inch. |
Can Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler Be Used with OEM Ford Gooseneck Ball
Tow Vehicle - 2017 F-450 SuperDuty crewcab dually pickup. Question - is the OEM removable trailer ball that was included in the gooseneck/5th wheel package considered a “pop up ball”? Is the convert a ball cushioned gooseneck coupler recommended...
How to Tow a 5th Wheel Trailer with a 2015 Ram 2500 Short Bed and Gooseneck Prep Package
I have a 2015 Ram 2500 Short bed that came with the factory GN prep package Its missing the two forward stanchions so not a full 5th wheel prep package. I now need to also be able to pull a 5th wheel trailer. Are any of the adapters safe to...
Does Brophy Ball Platform Have Vertical Adjustment Holes 1-1/4 Apart on Center
Will the Brophy RTB1 ball mount adapter work on a shank that is 2 inches wide with holes spaced 1 1/4 inches apart? The diameter of the holes is 3/4 inch. I do not know what brand of shank I have. | According to the review video we have of...
Can I Use Convert-A-Ball Adapter with Gooseneck Stabilizer Tripod
Will this item work with the convert a ball adapter if i purchase the ball adapter with it? | You can stabilize the trailer with the convert-a-ball adapter attached with Ultra-Fab Gooseneck Trailer Tripod Stabilizer part # UF19-950450. The Convert-a-ball...
Filter Your Search
Contact and Help