!Liberty Travel Trailer  x   >   !HWT  x   >   2008  x   >   !Fulton  x   >  

I have a 2008 Ford F350 8 foot bed and a 2012 Heartland bighorn 3070rl which hitch is the best for this set up | We can get your 2008 Ford F-350 long bed set up with a 5th wheel hitch to pull your 2012 Heartland Bighorn 3070RL. Based on my research...

Tow vehicle is an 08 Yukon 4x4, 5.3L, w/trailer package, class IV hitch frame mounted. Trailer is a car hauler, 22ft, 3450 unladen weight, approx. 7200 loaded. Yukon is rated for 8100 total towing weight. Do I have the right product for weight...

What are the dimensions for the included drawbar for part #60872 | The ball mount that comes with the Hidden Hitch Trailer Hitch, # 60872 (no longer available), is Sportframe Drawbar, # 3594. This Class I ball mount is designed for a 1-1/4 inch...

2008 Mercury Mariner Hybrid. Is this the correct harness? | The Curt T-Connector Vehicle Wiring Harness, part # 118551, will work on your 2008 Mercury Mariner Hybrid whether or not it has the factory tow package.. I am including a link to the...

As I looked through this website I saw no sliding hitches and mountiong kits specifically suited to the 2008 Dodge 2500 HD 4WD pickups | Yes, we have a Fifth Wheel Trailer Hitch with Slider for the 2008 Dodge 2500 Pickup. Since you are asking...

need to know how to match application to my vehicle... 2008 Dodge Ram Quad Cab 1500 SLT 4X4. Thank you. | The right air bag kit for your rear-axle application in the 2008 Dodge Ram Quad Cab 1500 SLT 4 x 4 is # F2286. This kit will come with...

can I mount a BandW patriot slider in a 2008 Dodge long bed 3500, using a BandW custom base rail kit? | I'm assuming you already have the # BWRVK3270? If not, it's not necessary to use a sliding hitch in a long bed truck. I'd recommend using...

I have no running lights on the trailer. I believe the BLACK and BROWN should both be hot. If not, can I use a jumper between the 2 on the tractor? 7 Way Round Connector on a International Tractor | I can help you troubleshoot your wiring issue. Sounds...

Want to know if the Load Stops for Rhino-Rack Aero/Sportz Crossbars S602 are compatable with the Rhino-Rack Vortex Aero Crossbars RRVA126B-2. If no please suggest something similar Thanks | The Load Stops for Rhino-Rack Aero/Sportz Crossbars,...

you recommended a etrailer trailer hitch # e78KR which is a class 3, because it will clear the ground. I have a Honda Element 2008 EX that is a Class 1C. will this fit my car? Also is etrailerTrailer better built than Curt? | The etrailer Trailer...

I need towing mirrors for 2008 expedition with 22 ft trailer whats your recommendation? | We do not have a custom fit snap on option for the 2008 Ford Expedition however, we do have several universal fit options. If you want a larger mirror,...

My truck has an existing 4-way connector. We are considering getting a smaller travel trailer, so I will need to convert to a 7-way connector. What would be the easiest way to do this? Thanks for your help. | Since your 2008 Dodge Ram 1500...

Do you have a roof vent that will fit a 14inch x 14inch without trimming? That us what I am looking for. | The Camco # CAM40480 that you referred to will fit your 14"X14" roof opening as long as you roof thickness is between 1-1/4" to 2-1/4"...

We have a 2008 Toyota Highlander Limited AWD with an aftermarket tow hitch. When attaching a boat trailer with a 19foot boat, the back end of the vehicle easily sags several inches. The Highlander has no trouble towing the weight, can pull the...

Hi I have a Nissan Frontier 2008 Crew Cab Nismo, 5foot Bed with utili tracks. Im looking for a ladder rack + bed cover without lose the utili tacks system. I prefer to have the three folding bed cover. based on what I saw at this point I dont...

Our steps didnt retract and were torn off our 2008 Damon Tuscany. The Coach Step part number is P/N 733-0001. It was 2 steps. What LC part # would be the equivalent? Thank You | The Kwikee Electric RV Step Complete Assembly - Double - 32...

Where would I find the connector on a 2008 Sequoia Platinum? | Assuming that your 2008 Toyota Sequoia has the factory 7-way connector, the factory trailer brake controller port will be above the emergency brake pedal. Removing the driver side...

Hello, I am looking at buying a 2008 honda pilot with existing side rails. I have INXB123-2 rails already. I was wondering if I bought a XS150 if that would work with those bars on a 2008 pilot | Yes, the Inno Through Feet for Aero Crossbars...

I need the slip in cross bar attachment pieces for the 4405-1 base plate. I purchased a used 2008 Ford Explorer sport trac and it has a 4405-1 base plate installed already. The spacing on the s is wider than it was on the Honda Element I was...

Hi. I bought the 6026 plate and fitted in reese airborne pin box. It fitted good, was the right size. However, hooking up on the demco auto glider hitch is not so easy. I read somebody else asking the same question where the locking handle on...

hi, I have a husky 15k hitch now , can i use the rails in my pick-up without changeing them if I switch to the curt a20. And do you sell it without the installation kit. I have a 2008 Silvarado with in-bed rails that I just pull 4 pins to...

which is best? Ill be pulling a 7100 lbs camper including hitch weight. I just want the camper to stop evenly without worry about grabbing brakes | The proportional is with out a doubt the way to go. It provides better braking performance in...

I have an 08 silverado 2500hd CC 66 bed with fifth wheel demco autoslider and im wondering if anyone has tried this with a short bed or similar setup. I have just over 24 inches to the wheel-wells, 34 1/2 inches from back of the bed to the...

Dont which bracket hardware I need for my hdx grill guard | The Westin HDX Grille Guard for the 2008 Ford F-150 is part # 57-2010. This custom fit grille guard comes with all included mounting hardware. However, if you need replacement installation...