Wiring a Brake Controller to a 2007 International Trucks 4300 Series
The only wires I have been able to find on my truck also control signal lights, since brake and signal lights run off the same wire. My tow truck is a 2007 IH 4300. | We may have a solution for you. To wire a brake controller on your 2007 International...
Installing a Trailer Brake Controller on a 2004 International 4300
I have a 2004 international 4300 with hydralic brakes. I would like to install a brake controller along with a 7 way pin. I have found a 7 wire plug in the frame rail behind cab containing the wires for lights signals etc. but Im lost after...
Spare Tire/Wheel For A 2003 International Harvester 4400 MD Truck
I have a 2003 International Harvester 4400 MD truck and would like a spare tire and need a rim. I can’t seem to find the rim size. Your site lists this rim for the 4300–can you confirm whether they are the same size as those found on the 4400...
E-Bike Carrier For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Can the Door County model be used with a small motorhome as well as an SUV? I will be moving the carrier between two vehicles, a 4Runner and a 25.5’ Itasca Navion. I love that it is on wheels - how high must it be lifted to install on a different...
Recommended Tire Pressure Monitoring System with 12 Sensors
Which system would be best for class A Tiffin and double stacker trailer??? Need 12 sensors | The TST TPMS for RVs - Color Display - Signal Booster - 6 Tire Sensors # TST-507-RV-6-C are a great choice for your Class A and trailer. This company...
Should There Be Power Draw At Tail Lights For Flat Tow Wiring on a 2023 Chevy Suburban
im a tech working on 2023 suburban bieng flat towed behind a 2014 tiffin zeph motor home correct harness f0 tailights when hooking ground taillamps work with ground connected causing draw on vec battery 45 ma | According to the owner's manual...
Will the Gustafson RV Puck Light - 4-1/2" # 277-000344 Fit My 2013 Itasca Navion IQ
Need 41/4 wide base overall 41/2 metal with 3 screw holes it is 11/4 depth. Can you help? | I spoke to my contact at LaSalle Bristol and he confirmed the Gustafson RV Puck Light - 4-1/2" - Recessed - 4 Watt # 277-000344 will be a replacement...
Brake Controller For A 2004 International 4300
Hi, I have a 2004 International 4300 series box truck. Id like to install a this brake controller, but Im not sure how to do it and what other parts Id need. Can you help me with that? Thanks! | Though The Curt Echo Under-Dash Wireless Brake...
Recommended Sidewinder Wedge Kit for a B&W Companion 5th Wheel Hitch
I have a B&W Companion 5th wheel hitch in my Ram 3500 with the factory puck system. Can I use the universal wedge that comes with the 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder item # RP61422 or do I need one specifically...
Difference Between Draw-Tite I Command And The Tekonsha BRAKE-EVN
Whats the difference between this controller and the older I-Command? They look identical to me.... Thanks for the assistance. | Though we no longer carry or sell The Draw-Tite I-Command The Tekonsha BRAKE-EVN Controller # TK63VR is just a...
Is There a Hitch Available for a 2002 International School Bus?
I need a hitch fir my 2002 international t444e school bus conversion to tow my 2005 ford freestyle. | To get a hitch on your 2002 International T444E School Bus, you will need to double check the width of the frame and how far the body extends...
Inner Bracket Dimensions for Buyers Products Hitch Plate with 2" Receiver Tube - Ford
What’s the inside dimension where the chassis would be? It looks like the 35 1/4 is outside to outside. | The inner bracket width of the Buyers Products Hitch Plate with 2" Receiver Tube - Ford # 3371809060A is 34-1/4" plus or minus 0.06" according...
Looking For New Wheels For A School Bus
Hello! I am looking for new wheels for a school bus. I have photos/info and am hopeful you all can help. Thanks! | Hello Aaron. I am happy to look into it and see what we can offer you. Go ahead and post what info you have in to comments below....
What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Mark S answered my previous question but a follow- up, please. I think the Yakima will be too heavy for me to move between my vehicles. Is there a lighter weight carrier available? Maybe Saris Superclamp HD which I think is out of stock everywhere??...
Where to Find Brake Controller Stoplight Circuit on Truck
Where do you find the hot brake light to hook up a controller too on a IHC 4300 2002 | Behind the brake pedal there is a switch that has wires ran to it that you'll need to test with a circuit tester part # PTW2993 to test all of the wires until...
Converter For Motorhome With Separate Turn/Brake Signals to Combined Towed Vehicle Signals
I have a 2008 Navion IQ on a 2007 Sprinter Chassis with the Winnebago installed 6 pin round trailer adapter, which has separate circuits for turn signals and brakes. I want to convert this for a tow vehicle with 4 pins. Do you have a solution...
Rear Anti-Sway Bar for a 2004 International 4300 with Onspot Chains
I am looking for a rear sway bar kit for my 2004 International 4300 on the web site it gives the part number rm-1179-110-00 then says for pickups I need to know if I am looking at the correct part or if there is a image of the complete kit for...
Will the Buyers Products Flatbed Hitch Plate Bumper Fit An International Durastar
Will this fit on a 2007 international durastar 4300 | The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper part # 3371809050 is a universal product which can be made to fit many different applications. I wouldn't be able to inform on...
Solution for Brake Controller that Pulses Trailer Brakes When Hazard Lights are On
need a wiring diagram to hook to a 4300 int. year 2002. problem is pulsating when hazards are on or left turn is on . not working write . they have the brake wire hooked to the left turn wire which is also brake indicator wire . I am troubling...
Replacement Motor For Lippert 165046 Double Coach Step On A 2011 Tiffin Zephyr
I need a step motor for my 2011 Tiffin Zephyr. There is no ID on the motor but the step is a LCI 165046 Dbl Slide 26. Do you have the replacement motor? THX, | The replacement step motor for your 2011 Tiffin Zephyr Lipper Components double step...
Kwikee Steps On Itasca Navion IQ Will Not Stop Once Retracted
2009 Itasca Navion IQ Two problems noted on my last RV trip. First symptom, steps didnt always auto retract. Second, step motor continues to run when the steps are fully retracted after closing the door. I assume its the controller. On...
Tire Chain Recommendation for Zephyr Class A Motorhome with 255/80R22.5 Tire Size
I have a Zephyr Class A Motorhome with duel wheels in a tire size of 255/80R22.5. What is the best tire chains of both the duel rear wheels and front wheels and the easiest to install? Thanks! | pewag makes very high quality tire chains that...
Replacement for Todd Engineering PS245S Power Switch
I see the F50ATS that you recommend. Is that a direct replacement for a PS245S Power Switch from TODD engineering. Thanks | Yes, the Furrion Automatic Transfer Switch - 50 Amp - 125/250V # F50ATS will work as a direct replacement for your Todd...
What Size Hitch Pin Does The Adjustable Shank For TorkLift SuperHitch Everest WDS Use?
what is the hitch pin diameterof this product, are they 5/8 holes | The Adjustable Shank for TorkLift SuperHitch Everest Weight Distribution # TLM9010 uses a 5/8" hitch pin. If you're looking for one, I recommend the etrailer Receiver Lock...
Filter Your Search
Contact and Help