Will Zinc Coated E-Track Bolted to an Aluminum Trailer Cause Corrosion
When bolting track to deck is there any concern regarding dissimilar metals being joined in the process - zinc coated steel onto aluminum? If so, what should be done during installation to minimize the difference? | The zinc plating on the...
Replacement Wheel Straps That Will Work With Pack'em Wheel Tie-Down Kit # PK-WTD
I am looking for replacement straps for the Packem Wheel Tie Down system. I only need the straps without the chocks. Thank you. | The Snap-Loc E-Track Tie-Down Strap # SLLS28CER will be the closest replacement strap we have to the ones that...
Solution to Mount Aluminum Car Hauler Ramps in Enclosed Trailer for Transport
Do you have any kind of mounting equipment that can attach the ramps to the trailer for transport? | We do have a solution to mount the # 288-07503 in what I'm assuming is an enclosed trailer. What you can use is the CargoSmart Rotating Safety...
Is Backing Plate Needed for Snap-Loc E-Track Tie-Down Anchor?
Do you sell a backing plate that fits this hole spacing? | There is no backing plate we offer with the same 5-1/16" apart on center spacing that the mounting holes of the Snap-Loc E-Track Tie-Down Anchor # SLSZ. However, these anchors can be...
Will the Malone MicroSport Trailer with J-Style Carriers Fit 4 BKC Kayaks
I want to buy the Malone MicroSport Trailer with J-Style Carriers for 4 Kayaks Item # MPG462G2 but want to make sure my 4 BKC Kayaks are not too big at 11.5 long, 34 wide, 14 tall and 68 pounds each. Thank you for any feedback | Yes. The Malone...
Can CargoSmart Square Hook Fit With Single Anchors
Can this be installed on the single e tracks or are these only supposed to be used in the long runs? | Yes, you can use the CargoSmart Small Square Hook # CS47FR with the single E-Track anchors: - Black # SLSB - Stainless Steel # SLSS -...
Hitch Adapter to Provide 1-1/4-Inch Receiver Opening
I was looking for a 1.25 to 1.25 riser. Saw the 1.25 to 2inch but thats not what I was looking for. Do you carry the one I need? | It sounds like you want a hitch adapter with height rise that will fit into a 1-1/4-inch hitch and also provide...
Can I Use the Snap-Loc E-Track Self Drilling Metal Screws to Install On Thin Aluminum Floor
Hello, Trying to figure out how long of screws I need for the e-track install on an aluminum enclosed trailer Alcom. Inside of the trailer only seems to have white covering rather than plywood. Is 1-1/4inch screw too long? | I don't see any...
Availability of 2-Slot E Track Horizontal Track with Black Powder Coat Finish
Is the 2-Slot E Track horizontal track available in the black powder coat? | I have a few of options for you, but this exact Erickson 2-Slot Horizontal E-Track # EM19145 isn't offered with a black powder coat finish. The Erickson Mini E-Track...
Is E-Strap Compatible With Ford Box Link System?
Will your E-strap products work with the ford box link system? | The Snap-Loc E-Track Tie-Down Strap w/ Ratchet and Soft Tie-Loop - 2" x 8' - 1,467 lbs, # SLLS28RER, as well as many other E-track products are compatible with most similar systems....
Self Tappers for Installing E-Track on 2021 Wells Cargo Road Force
Hi. I bought some e trac from you. When I tried to install it, the screws I used, which are good quality metal screws stopped when they hit what I assume as a metal stud, which are on 16 inch centers. What kind of screws do I need? Thanks,...
Recommended Hardware for Installing E Track Onto Trailer Interior Side Walls
Do you sell screws to attach e-tracks to trailer walls? | The hardware needed will depend on what surface you'll be mounting the e track to and how thick it is. We do offer 1 x 1-1/4 inch hardware for installing e track like the # 3371903055...
5/16 Inch Self Tapping Screws To Replace Existing 5/16 Inch Bolts
I need self tapping screws to replace bolts for new jacks on my rv TT. The current ones are 5/16v thick and 1inch long. Will they work? | If your current bolts are 5/16 inch, then the Self-Drilling Screw Hardware for Snap-Loc E-Track Tie-Down...
ATV/UTV Wheel Tie Downs That Are Made In The USA
I see these were not made in the USA. Do you have a set that is made here in the USA? | While we do not have an entire kit like the Erickson ATV E-Track Tie-Down Kit # EM98CV that is Made in the USA, we will have different parts that are Made...
Installation Hardware for CargoSmart X-Track on Plywood
I will be mounting this X-Track on a 15/32 sheet of pressure treated plywood on the wall in my garage. What screws would you recommend I use and how many? | CargoSmart actually has a hardware kit designed for their tracks like the 5' Long Horizontal...
Hardware for Attaching E-Track to Wood Floor and Walls
I have an aluminum ATC trailer that has wooden floors and siding. I want to put Etrac down on floors and some of the side walls. Wood is 3/8” thick. What type of screws do I need? | Since you have wooden floors in your trailer the hardware I...
Availability of Removable Wheel Chocks For ATVs To Mount on Trailer Floor
I am interested in purchasing 4 atv wheel chocks. I would like to make them quick disconnect for I use my trailer for many uses. 1. Do you sell the attachment plate ? 2. Do your wheel chocks accommodate a 8inch wide atv tire? Thank you...
Does Rack Em Manufacturing Removable Wheel Chock # RA-17 Include the Base Assembly
Does this come with the base | Yes, the base portion of the Rack 'Em Manufacturing Removable Wheel Chock # RA-17 is included with the chock. The base installs with user-supplied hardware (8 fasteners are needed) and the chock can be easily removed,...
Handle Conversion Kit To Convert Snap-Loc Dolly Into a Push Cart
I got the Snap-Loc All-Terrain Dolly Item # SL1500D6R before I saw you had one with the handles Item # SL1500PC6R. Are the handles available separately or can I exchange mine for one with handles? | Yes, we do carry the Panel Cart/Pushcart Conversion...
Recommended Cargo Stabilizer For Large Bin In 2005 Ford E450 Box Van
I have a Large Trash bin approx 2,000 lbs loaded in a 2005 E450 14ft Box Van. Can you suggest a method of securing the cargo? It was previously attached to the wall and it pulled the e-track out. Thank you | The biggest problem with an E-Track...
Cargo Tie Down Recommendations for 5x8 Enclosed Cargo Trailer
Please can you help me decide which of the surface mount tie-downs is best to use on the floor a 5x8 enclosed trailer in which I will normally haul household goods such as boxes and furniture? I am considering one of RR2K, RR8K or RR09. Please...
What is the Capacity of the Snap-Loc E-Track Tie-Down Strap with Ratchet and Soft Tie-Loop
Hi, I just bought 12 of your SLLS28RER and you guys are selling yourself short. Your specs call them at 3000# breaking strength with 1000# working load. The tag on the strap lists them at 4400# breaking strength with a 1467# work. Almost 50...
Are the Snap Loc Anchors Compatible With the E-Track Tracks
Snap Loc E Track single Pieces.. will standard E track strap anchors work.. i have e track now just wondering if i would have to by all new stuff.. thanks | Yes, the Snap-Loc brand locks, like part # SLARI, will work with the E-track brand Tracks. I...
Will E-Track Tie Down Anchors Fit in Snap Lock Horizontal and Vertical E-Track
Can these be used with the E track tiedowns? | Yes the e-track tie down anchors like the # 59131 can be installed in the Snap-Lock Horizontal and Vertical E-Track # SL27FR that you referenced. Basically any e-track accessory will fit in the...
Filter Your Search
Contact and Help