Recommended Bolt Size for Installing Packem Trailer Racks
What size bolts so I have them when it gets here | I checked with our contact at Packem and he informed me that they usually recommend using 5/16 x 1-1/2 bolts that are grade 5 or 8 with flat washers and matching lock nuts to install their racks...
Trimmer Rack for Existing Stake Pockets on Lawn Mower Utility Trailer
Hello, I am looking for a Trimmer Rack that will easily mount to my John Deer 17p Utility Trailer. It has steak mountinch pockets around the side, measuring 2x3/4x2deep for a typical 1x2 wood steak . Would like to have a trimmer rack that...
What Diameter are the Pre-Drilled Holes of the Pack'Em Trimmer Rack # PK-6
What size are the pre-drilled holes ? | I went out into our warehouse and pulled a Pack'Em Trimmer Rack # PK-6 and measured the pre-drilled holes and found them to be 3/8 of an inch in diameter. |
Recommended Nuts and Bolts to Install the PackEm Rack for Utility Trailers # PK-6-OP1
The rack comes without bolts what size bolts are needed to fasten these is it 3/8? | I checked with our contact at Packem and he informed me that they usually recommend using 5/16 x 1-1/2 bolts that are grade 5 or 8 with flat washers and matching...
E-Track Chocks and Tie-Downs for 32 Inch Tires on a Side by Side
My side by side has 32 inch tires. Do you make them for that size ? | We don't have a kit for 32 inch tires but you can use a few short sections of E-track such as # EM19145 or # ET4S with Erickson E-Track Wheel Tie-Down Strap # EM58523. And...
Is Backpack Blower Accessory Available As a Separate Item For PackEm Trimmer Rack
Hello,I recently purchased and reviewed the Packem 3 trimmer rack for an open trailer and LOVE it. I am looking for a Backpack rack to add to the unit and noticed the PK-OP1 accessory. I was wondering if the backpack blower part of the accessory...
Converting an Open Trailer Trimmer Rack to an Enclosed Trailer Trimmer Rack
I purchased trimmer rack for open utility trailer few months ago. but now I own enclosed cargo trailer. in order to use same trimmer rack for my new trailer, I need extension brackets with bolts. I was wondering if I can just buy these parts...
Will Pack'Em Rack for Open Utility Trailers Fit 2' high Sides on Trailer
I have a high sided utility trailer with 2ft high sides. Will this rack fit? | Yes, the Pack'Em Rack for Open Utility Trailers # PK-6-OP1 is compatible with your 2' high trailer sides. The supports don't necessarily have to rest on the floor...
Trailer Rack Recommendations To Hold 6 Trimmers
I need a rack not expensive, for at least six trimmers to be mounted on the bed of a truck, do you carry such a rack? | If you have an open trailer, the trimmer rack i recommend is the Pack'Em Trimmer Rack for Open Utility Trailers, part # PK-6....
What Rack is the Open Utility Shovel, Rake and Broom Holder # RA-23 Designed to Fit
will these fit a rackem pk-6 weedeater racks and if not what would i need to get to put this on my trailer and also does the package come with upper and lower racks | The Open Utility Shovel, Rake and Broom Holder # RA-23 that you referenced...
Can The Pack-Em Ladder Rack Bracket Kit Be Installed on a Trailer with a Flat Top and Rain Gutter
the trailer in the picture is a round top. My traler has a flat top,with a gutter at the very top will the PK-28B work on mr trailer. | The Pack-Em Ladder Rack Bracket Kit can be mounted on a trailer with a flat top and a rain gutter. You will...
Dimensions Of Mounting Brackets and Main Bars of Packem Trimmer Rack for Enclosed Trailers PK-6-5
Can you supply a drawing that shows all the parts of a part # PK-6-5 that includes dimensions of all the parts? I am considering the part # PK-6-5 for use in my garage and not in an enclosed trailer. I need to work out the mounting for the...
Using PackEm Wheel Tie-Down Kit # PK-WTD for Transporting Lawn Mower
Do you recommend two of these per mower or just one? | The Pack'Em Wheel Tie-Down Kit # PK-WTD that you referenced includes parts to secure one wheel of a wheeled machine. It comes with two chocks, one strap and the required mounting hardware....
Pack Em or Erickson Wheel Strap Recommendation for Securing 2014 Honda Pioneer 700
2014 Honda Pioneer 700 about 1500lbs. which would work for the rear wheels? I like the Erickson because the straps Ratchet Down. Trailer floor is 1x6 boards. One more question, Are replacement straps available for either? | Actually both the...
Ladder Racks For Trailers and Trailers with Crossbars
Do you offer ladder racks as an accessory for your trailers? | The Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 has the versatility to fit many of our trailers even though they are not enclosed. The Pack'Em Ladder Rack Bracket Kit...
What is Included with Erickson E-Chock Wheel Chocks for E-Track
Are the straps that are pictured included or just the wheel chocks? | Erickson E-Chock Wheel Chocks for E-Track - Powder Coated Steel - Qty 2 Item # EM09162-2 are the chocks only. We do have Pack'Em Wheel Tie-Down Kit for Truck Beds and Trailers...
Can The Pack'em Trimmer Rack Be installed On An Enclosed Trailer
Can these be used for an in closed trailer? | Yes, the Pack'em Trimmer Rack for Utility Trailers # PK-6 simply bolts onto the railing of a typical utility trailer so you could just as easily bolt it to your enclosed trailer. I have personally...
Is Adapter Needed for STIHL BR700 Blower with Pack'Em Rack for Open Utility Trailers
Thinking about buying your pack-em rack, item number pk-6-0p1. The only question I have is about the blower. I have a stihl br700 blower. Do I need any extra to parts to support my blower with that rack system? Thank you | I spoke with my contact...
Rack Em Adapter Recommendation for Stihl Blower
i have recently purchased weed eater rack PK-6 with the expansion kit PK-OP1 i have a sthil blower back it says in the instruction that this model requires an adapter what part number is it | Depends on which Stihl blower you have. If you have...
Availability of Replacment Locks for Pack'Em # PK-6-OP1 Landscape Trailer Equipment Rack
I purchased this rack back in the summer time and a couple of the locks have already rusted so bad that I can not get them to close. I have tried to go out and purchase more but can not find the right size so it fits the holes in the trailer....
Can The Mounting Tabs Be Cut Off Of the Ladder Rack Bracket Kit For Packem Enclosed Trailer?
Hi, I’m interested in Ladder Rack Bracket Kit for Packem Enclosed and Utility Trailer Towers - Qty 2. I don’t need the tower because I would like to bolt these two bracket directly to a 2x12. My question is will the company make them without...
Weight Capacity For Pack'Em 2 Ladder Rack for Exterior Side Wall of Enclosed Trailer # PK-28WL2-BM
I have a 7x12foot v-nose enclosed trailer and I am planning on adding sidewall ladder racks on the right hand side of the trailer. Hoe much weight will these sidewall ladder racks handle? Im planning on mounting an 106 aluminum brake on them....
Hardware Needed to Install Pack 'Em PK-6 Utility Trailer String Trimmer Rack
What bolt length is recommended for these? And should I get washers or lock washers? | The length of mounting hardware needed for the Pack 'Em # PK-6 trimmer rak will be completely dependent on how and to what you mount the racks. Using 3/8...
Which Mounting Hardware for Pack 'em PK-6 Trimmer Rack
What bolt length is recommended for these? And should I get washers or lock washers? | The length of mounting hardware needed for the Pack 'Em # PK-6 trimmer rak will depend on how and to what you mount the racks. Using 3/8 inch grade 8 bolts,...
Filter Your Search
Contact and Help