What do Roof Rack Feet do for Inno Roof Rack on 2010 Pontiac Vibe With Naked Roof
Hello, I already asked a question and I had a response Though I dont understand the racks feet Im sorry Im not fluent in english, I speak french. Thank you ! | It sounds like you are asking the purpose of the "feet" of the Inno roof rack that...
Will the SportRack Vista Roof Cargo Box Fit a 2004 Pontiac Vibe with Factory Roof Rack
Will this carrier fit a 2004 Pontiac Vibe with a factory-installed roof rack that includes cross bars? And will it mount without the rooftop antenna having to be removed? | The SportRack Vista cargo box # SR7018 will fit on crossbars that are...
How to Carry 3 Bikes on a 2009 Pontiac Vibe GT
It looks like there is only one hitch recommended for the GT model, and it is a class 1. I read on the Thule bike rack description that I can only carry two bikes, but I need to carry three. Is there any way for me to be able to do that with...
2009 Pontiac Vibe with Factory Crossbars Cargo Box Recommendation
I have a 2009 Pontiac Vibe 1.8L FWD base model with factory installed crossbars that goes from side to side. What is the compatible cargo box that can be installed without any additional railings/racks/bars? Thanks. | I checked with Thule and...
How to Determine if Trunx Rooftop Box Fits Factory Crossbars
Hi. I have a 2004 Pontiac Vibe with the factory installed roof rack and crossbars. My concern is the crossbars which have a slight curvature to them instead of going flat across. Can I buy a rooftop cargo box from you that will work? Im...
Adapting 1-1/4 Receiver Tube For 2 Hitch Accessories - 2004 Pontiac Vibe
If I buy your class 2 hitch for my 2004 pontiac vibe do you have an adapter to bring it up to 2that will fit. I have a class 3 on my 2008 Subaru and I want to make them universal | Yes, it is possible, with certain exceptions. The Tow Ready...
Possible Solution to Install Hitch on Vehicle with Broken Weld Nuts
I knew when replacing my hitch Curt 12228 purchased etrailer order 107783101 on my 2009 pontiac vibe that two of the internally welded frame nuts were broken. I had to grind off the bolts after being rear ended and needing to replace the hitch....
Hitch and Ball Mount Compatibility on 2010 Pontiac Vibe
Hi, I put my receiver on my 2010 Pontiac Vibe over the weekend. Easy, once I cleaned the rust out of the tapped holes. Problem: The ball mount - a replacement - hits a stop on the way in and I cannot put the pin in. It seems like my choices...
Parts Needed to Tow Small Trailer with 2007 Pontiac Vibe
I have a 2007 Pontiac Vibe I need to tow a small utility trailer with and would like to align my sizing with the truck that usually does this work. Our truck has a 2inch ballis it possible to fit a 2inch ball to this receiver? Second, our...
What Draw Bar Fits Draw-Tite Class I Hitch Part # 24812
I have 3 - 1 1/2 drawbars. How can I tell if they will fit in the #24812 hitch? Is there a measurement of the pin hole location for this hitch? | The Draw-Tite Class I hitch you were looking at, part # 24812 uses a 1-1/4 inch receiver. A class...
Hitch Balls that Fit Curt Ball Mount # C45521
I bought this from you, but bought the wrong ball for it. Which ball fits this? Curt Class II Drawbar - 2-5/8 Rise, 3-1/4 - 7-1/4 Long - 3,500 lbs | For the Curt ball mount # C45521 you mentioned you'd want the part # A-82 for a 2 inch ball...
Recommended Trailer Brake Controller and Wiring for 2005 Pontiac Vibe
I have a 05 Pontiac Vibe I need to wire it up to tow a pop up camper that has electric brakes so I will need a brake controller. Just not sure what I need.... The standard harness plus the Universal Installation Kit for Trailer Brake Controller...
Trailer Hitch Receiver for 2003 Pontiac Vibe is Touching Muffler
I recently purchased a Curt hitch from you for my Pontiac Vibe. I left very good reviews because it did install very easily. I did not read all the reviews but Im going to have to make some modifications because the muffler is vibrating against...
Will the Yakima RocketBox Pro 14 Fit the Factory Crossbars on my 2004 Pontiac Vibe
I just want to make sure that this box will fit my car. I have a 2004 Pontiac Vibe. It has the factory rack that runs parallel with the vehicle plus the two the run cross ways, they are able to be moved around. They are not raised up and...
Should 2007 Pontiac Vibe Be Flat Towed Or Dolly Towed
I read your response to anothers question about this, but it didnt mention the transmission type of the Vibe - will this work for an automatic transmission? | The flat towing products mentioned in the question you read will fit your 2007 Pontiac...
Can 2005 Pontiac Vibe Be Flat Towed Behind Motorhome
Besides tow bars, light and braking packages from E trailer, would a 2005 Pontiac Vibe need a transmission pump for flat towing? | I checked the online owner's manual for the 2005 Pontiac Vibe on the GM website and it shows that the front-wheel-drive...
Trailer Hitch & Related Items for 2009 Pontiac Vibe
will hitch C12221 fit my 2009 Pontiac Vibe? | Yes, the Curt 1-1/4-inch Class II hitch # C12221 will fit on your 2009 Pontiac Vibe so long as it is the GT version. If your Vibe is other than the GT version then instead you will want Curt's hitch...
Canoe Carrier Hull Facing Down on a Yakima Rack and Roll Trailer # Y08107
Hello, Id like to carry on a Yakima Rack and Roll Trailer - 78inch this canoe recreation discovery 169 with the hull facing the road so that I can transport my paddling gear inside the canoe. Is it possible? If yes, what kind of carrier can...
Does Conical Washer 01292-008 Fit Curt Hitch that Fits 2007 Pontiac Vibe
Will your 1/2 inch conical toothed washer fit the 12 mm bolt for my Curt trailer hitch on my 2007 Pontiac Vibe? Thank you. | Yes the Reese conical washer part # 01292-008 will work with the install hardware of the Curt hitch # C12221 that fits...
Will the Pro Series RB3 Weight Distribution System part # PS49582 fit a 3x2 Trailer Frame
I have a travel trailer with a tongue frame size of 3x2. Will the frame brackets on this WD hitch fit? Thx | If the width of your trailer frame is 2 inches and the height is 3 inches the Pro Series RB3 Weight Distribution System part # PS49582...
How Does Brake Output Circuit of Brake Controller Get Connected to a 2005 Pontiac Vibe with 7-Way
Please explain where the brake controls is on my 2005 Pontiac Vibe for the blue line. Also the best way to hook up the power line to run back to my trailer. | Since your 2005 Pontiac Vibe would not have came from the factory with a 7-way the...
How To Install The T-One Vehicle Wiring Harness On A 2005 Pontiac Vibe
Im installing the wiring harness 118458 into my 2005 Pontiac vibe. The video link is very helpful. However the brake/tail light plug on the passenger side has three prongs instead of the two prong connector that comes with the assembly green...
Will SportRack SkyLine Roof Mount Cargo Box Fit a 2003 Pontiac Vibe with Factory Roof Rack
Will this model fit my 2003 Pontiac Vibe with factory roof rack? | The SportRack Explorer Cargo Box, # SR7018, is a semi-universal fit item made to fit as many roof racks as possible. As long as the crossbars on your 2003 Pontiac Vibe have a...
Adding Larger Wheels to Trailer Hub Assembly with Same Bolt Pattern
I am looking at 8-259-5UC1-EZ. It says they are for 8-12 inch wheels. Is there some reason it wouldnt work for bigger wheels as long as the bolt pattern is correct? I ask because I have hubs similar to this and want to put bigger 13inch or 15inch...
Filter Your Search
Contact and Help