Recommended Trailer Hitch Receiver for 1965 Ford F100
I have a 1965 ford f100 p/u it is a step-side with the plain straight bumper. Which hitch do I need? Thanks | For your 1965 Ford F100, I recommend the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41001. This hitch receiver is a 2 inch Class...
Recommended Exhaust System For 1965 Mustang With 289 4.7L Engine
I have a 65 Mustang convertible, 289 2V, single exhaust,all ford specs would like to change muffler to pick up a little sound, dont want loud sound just sort of medium throaty sound. which muffler do you recommend? | The exhaust system I recommend...
Availability of a Bestop Tigertop for a 1965 Jeep CJ-5
I would like to purchase a Tigertop for my jeep. I have the old Whitco top now but it is very old and worn. Can I purchase the Tiger top minus the hardware? And wll my old hardware work with the new Tigertop? Thanks | The Tigertop, # B5140501,...
Derale Oil Filter Relocation Kits For a 1965 Pontiac GTO With 389 Cubic Inch Engine
I am wondering if the Derale Oil Filter Relocation Kit for Multiple Engine Thread Sizes will fit a 389 Pontiac engine? | Yes, the Derale Oil Filter Relocation Kit # D15748 will fit your 1965 Pontiac GTO with the 389ci engine. Your oil filter...
Fan Recommendation for my 1965 Chevrolet Corvette with the 396 Cubic Inch Engine
Which dercale fan and controller do you recommend for a 1965 Corvette with 396 CI, 425 horse power engine? | For your 1965 Chevrolet Corvette with the 396 cubic inch engine I really like the Derale 26-3/8" Dual, High-Output Electric Radiator...
Hitch Ball Mount and Trailer Wiring Recommendation for 1965 Ford F100 to be Used in Germany
Good Morning, I have a 1965 F100 with the V8 352 engine and would like to put a hitch on it with a 13 pin Euro plug. The truck will be going to Germany and pulling German trailers. Which hitch do I need? Can you supply the the wiring harness...
Recommended Trailer Hitch and Wiring for 1965 International Travelall
Hi, Im looking to purchase a Curt Hitch 14082. what would the appropriate 4 pin flat connecter harness and brackets be? I have a vintage 1965 Travelall that this is going on. There are numerous choices for the wire harness. I like the the idea...
Where Does the 1/2" Bracket Strap on Firestone Air Bags for 1965 Ford F-350 Go
I have a 1999 7.3 f350 with 1 overload spring. Does the lower mount ,using the 7inch bolt , mont to the overload spring or the whole spring pack? It says both ways. | In regards to the Firestone Ride-Rite Air Helper Springs part # F2071 on a...
Recommended Hitch for Light Duty Towing w/ 1965 Chevy C10 Pickup
What do you recomend for light towing, 16ft aluminum boat and trailor? | As long as your C10 has the stock bumper, we do indeed have some hitches that would be available. Since you're not going to be towing anything super-heavy, I'd recommend...
Is There A Trailer Hitch Receiver For My 1965 Plymouth Fury Convertible?
I am looking for a trunk mount or a trailer hitch for a 1965 Plymouth Fury convertible any suggestions | I may have a possible solution for you, but we do not carry any vehicle-specific custom trailer hitch receivers or trunk-mounted accessories...
Will the Curt Hitch # 13028 Allow the Spare Tire of a 1965 Chevy Truck to Be Kept
will this interfere with standard between frame under bed spare tire carrier | I checked the install notes of the Curt hitch part # 13028 and you will be able to keep the spare tire on your truck with this hitch installed. At worst you might...
Adding a 7-Way and Brake Controller to a 1965 Chevy C10 Pickup Truck
Mike Here did great video on the C10 parts needed for wiring on a Chevy C10 1965. My question is as do need the 7pin connector set up is do I need the brake controller etc as this is for an Airstream 2015 30 foot Flying cloud and thought the...
Trailer Hitch Receiver Fit For 1965 Ford F-250 With Custom Bumper
I have a 65 Ford F250 2WD truck with a unique rear bumper customized by the original owners. I need to see if you have a hitch that would work with this. | Outstanding photos thank you so much for sending them, and based on that we do have...
Fit of Curt 13028 Class III Trailer Hitch on 1965 Chevy C10 Stepside Pickup Truck
hi trailer hitch number 13028 fit on a chevy c10 1965 stepside thank | I love that body style! The Curt # 13028 is a fit if the truck is equipped with the standard factory style or step bumper. |
Brake Controller and 7-Way Recommendation for 1965 GMC Van
Hey guys, we just had a hitch installed on our van and now we are needing to add trailer lights and a brake controller 7-wire to use with our tandem axle trailer w/ brakes. Any help would be greatly appreciated! | You will need to start with...
How to Ground Brake Assembly Magnet on Older Camper
Which is the ideal way to ground my new dexter electric brakes? A ground wire all the way to the white wire on the trailer connector then from the white wire on the truck connector all the way to the battery negative terminal, or to the trailer...
What Is Needed To Tow A 1965 Jeep With A Motorhome And A 2002 Dodge Ram
what do we use to tow our 1965 jeep with the motor home and if we wanted to our 2002 dodge 1500 ram pick up. we just bought the jeep | At this time we do not have a base plate kit option for the 1965 Jeep CJ5. So flat towing would require a...
Option for Securing E-Track to Floor Of Car Hauler
How do you secure the e track to floor for hauling a car | I'd use 1/4 inch diameter lag bolts whose length is a bit more than the thickness of the floor. How many bolts you need would depend on what you're using the E-track for. I'd probably...
Will The MagnaFlow Exhaust System # MF15815 Exit Through Rear Valance on 1965 Mustang GT
will mf15815 exit through the valance exhaust holes on the 65 mustang gt | I contacted our representative at MagnaFlow about installing the MagnaFlow Exhaust System, part # MF15815, on your 1965 Ford Mustang GT. He informed me that the exhaust...
Curt Hitch Recommendation for a 1965 Chevy C10 Short Bed
I see in the QandA that Curt part 13028 fits a short bed 65 Chevy c-10 pick-up. My question is about the load range for this vehicle. The plate on the truck says 5000gvw and the curb weight is about 3500. Since I am doing a frame off restoration/modification...
Options For Adding A Trailer Hitch To A 1965 Ford Mustang
Hi, I am looking for a hitch for my 1965 ford mustang. Do you have one? Im not towing, just using it for a bike hitch. | That is a very cool car. I do have a few potential options for you, but we do not carry a custom fit hitch for a '65 Mustang. We...
Could Blaylock EZ Wheel Lock part # BLEZ-302 Fit Vehicle Wheel
will the Blaylock EZ trailer aluminum wheel lock large item# BLEZ-302 work on a car wheel? | There's no reason the Blaylock EZ wheel lock part # BLEZ-302 wouldn't work on a vehicle wheel. It fits most wheel diameters that are between 15 and...
Flat Tow Wiring for a 1965 Ford Mustang with 1 Wire System
Hi I have a 1965 mustang and i want to add a tow bar, the rear tail light, brake light and turn signal are all on the same line will your product Item # 118158 split these out so I can wire up my trailer to have taillight, brake light and turn...
Trailer Hitch and Wiring for a 1965 Chevy C/K Series Pickup Short Bed
Will this part 13028 fit a short bed 65 Chevy c-10 pick-up. I notice that it only lists a long bed. | I checked with Curt and they do list trailer hitch # 13028 as a fit for all models of the 1965 Chevy C/K series pickups as long as they do...
Filter Your Search
Contact and Help