!Expedition  x   >   ProPride  x   >   !Rola  x   >  

I have a 2016BMW X5 Xdrive35i tow capacity 6600lbs+ No.BO16.8 traveltrailer20Fbumper to bumper GVWR 4780LBs. 2’’/4”frame . Normally all loaded tongue weight is about 500-600LBs It never exceed 700, but if I add propride 3p probably will exceed...

Want to tow an Airstream 25FBT with pro pride hitch, I often Boondock without unhitching the trailer. Can I use the tongue jack to raise the front of the trailer for leveling without unhitching the pro pride? | Yes, you can use the tongue jack...

i pull a tear with my jeep wrangler and the spare tire gets in the way of the hitch, in the past i would just take the spare off and throw in the back. I also bought and hitch extension, but the safety chains are too short. I also use a weight...

How big a difference is there between the recommended hitch and the “best” solution for $3k + ? | The ProPride weight distribution system part # PR97QR is the Lamborghini/Ferrari of weight distribution systems...it really is the nicest and best...

Will this hitch work with an underslung coupler? | Hey Eric, I went ahead and got in touch with ProPride, and they confirmed that yes the ProPride 3P Weight Distribution Hitch w/ Sway Control for 2-1/2" Receivers # PR47QR will work with underslung...

How much does this WD hitch weigh overall? I need to consider that when calculating the payload. Thanks! | The ProPride 3P Weight Distribution Hitch w/ Sway Control for 2" Receivers # PR57QR ships out at 240 lbs so it's definitely a hefty...

I am looking at a trailer outdoor 27trx that has a dry tongue weight of 1435lbs. Will this work on it? | The ProPride 3P Weight Distribution Hitch w/ Sway Control # PR47QR works for a tongue weight of 850-1,400 lbs. Unfortunately you would already...

Ive been doing a bit of reading on the WD hitches and sway control systems and cant really wrap my head around how sway control cant interfere with turning and reversing. I can see how normal driving would be fine, but once you arrive at the...

Can you reverse into a site with this connected? Does the sway control prevent turning while backing? | Yes, the ProPride 3P Weight Distribution Hitch # PR37QR will allow you to backup with the trailer connected without having to disconnect...

Is it possible to change out the hitch ball to different sizes. Thank you, | The ProPride 3P Weight Distribution Hitch w/ Sway Control for 3" Receivers - 14K GTW # PR67QR only can be used with it's included 2-5/16 inch hitch ball. Since this...

I am looking at purchasing a 20foot TT and need to know about hitches except the more I read the more I am confused. What is a good weight dist. hitch that also prevents sway and doesnt cost a mint? Are the Hensley and ProPride 3 hitches that...

Is the ProPride hitch worth the cost of the unit? I have an Andersen currently, yet towing here in Montana it will manage to sway on windy days. Everything I have read and watched on Youtube seems positive, except the price. I am toing a Windjammer...

Ok, here is the question, I have a 37 toy hauler, I currently have a 4 pt equalizer 1400lb WD hitch setup and it works pretty good, yes I have some pull when being passed by a semi, but thats to be expected, at least I think so. I have towed...

Will the chain extension kit work with a Hensley hitch | Yes, The Wiring and Safety Chain Extension Kit # PR34QR will work with your Hensley hitch per the manufacturer. This kit will help you if your chains and cables do not extend 24 inches...

Just Signed on the dotted line for a new Premier 26FKPR TT. Needless to say we are very excited here, and I had a few questions regarding opinions on load leveling systems. Looking at three different brands and not sure which way to go. 1:...

Good morning, Im buying a Grand Design Imagine 2670mk and Id like to know if the 3MP will fit on the tongue along with the 2 20lb propane ranks, 2 batteries and a rack to hold a generator as well as the generator itself? Thank you, | I checked...

Bought a nice long trailer hitch from you. Now my safety chains are too short and the trailer ends are welded to the trailer frame. Can I buy a 9-12 inch chain extension with 5000lbs working load several connectors to make up the difference....

Do the propride hitches need to be professionally installed? Or can we do it ourselves? | You can definitely perform the installation of the ProPride 3P Weight Distribution Hitch # PR57QR yourself. In addition to the written instructions it...

My truck has a 2inch hitch receiver. The WD hitch is for a 2 1/2. Does anyone know of a product allowing me to connect the two? I know there are sleeves for going from a larger hitch receiver to a smaller hitch, but I need to go the other way....

Hi - I just bought your 1400 lb Propride 3p trailer hitch to haul a 10,500 RV trailer behind a 2019 Dodge Ram 1500. I originally put heavy duty Airlift 5000 air shock bags on the truck to help compensate for too much rear end sag when towing...

Is there a safety chain extension kit for the ProPride 3P Weight Distribution Hitch w/ Sway Control for 2-1/2" Receivers - 14K GTW, 1.4K TW Item # PR47QR? | There is indeed a safety chain kit that is designed to be used with the ProPride 3P...

How much does this whole system weigh?? Trying to figure out how much added tongue weight. thanks. | The entire ProPride 3P Weight Distribution Hitch # PR97QR weighs 195lbs. You will also most likely need the Wiring and Safety Chain Extension...

Since this sits back a bit further than a standard WD do I need longer chains? | The ProPride 3P Weight Distribution Hitch w/ Sway Control for 2-1/2" Receivers # PR47QR does have more space so you might need longer chains to ensure the chains...

do y'all carry some kind of cover for the ProPride 3P Weight Distribution Hitch w/ Sway Control for 3" Receivers PR67QR? | Yes! We do carry a cover for the ProPride 3P weight distribution hitch # PR67QR. That is the Hitch Cover for ProPride...