Recommended Trailer Hitch For 2004 Ford Escape
Hello, I am looking for a Class I frame rail mount style for my 2004 Ford Escape. Do you carry such an item? Regards | The Class l trailer hitch that is designed to fit your 2004 Escape is part # C11106. This is a Class l and it has a 1-1/4...
How Do I Determine What Axle I Have And If I Can Lift It?
Im wanting to lift my pop-up camper and every thing I find keeps referring too #9 #10 etc torsion axle. What do these numbers refer to and how to I tell what axle I have | A torsion axle uses interior spring for tilt and proper ride versus...
Does Prodigy RF Brake Controller Fit 2016 Ford Escape with Factory 7-Way
According to the answer below - I should be able to use this brake controller with my 2016 Escape Titanium with the Towing Package that already has a connection from the current 6 round connector to the battery. The car is currently charging...
Installation of Blue Ox Base Plate Kit & Flat Tow Items for 2021 Ford Escape
Will the base plate #BLU55XR Fit my 2021 Hybart ford escape. Will the kit come with the nuts and bolts | Yes, the Blue Ox Base Plate Kit, # BLU55XR is confirmed to fit the 2021 Ford Escape hybrid. It comes with all needed hardware and we even...
Trailer Hitch Receiver & Wiring For 2010 Ford Escape
I am wanting to install a trailer hitch on a 2010 Ford escape without a factory installed hitch and with a full size spare. What is your recommendation? And does it come with wiring harness that will work without backup sensors? | The trailer...
Is Bumper Fascia Trimming Needed to Install etrailer e89YR Class III Hitch on 2021 Ford Escape
Is there any cutting required of my bumper? on a ford 2021 escape the video showing a different product being installed . I have seen a few cars like mine that have had to cut out a little square in there bumper . | To install the etrailer brand...
Will Using Timbren Helper Springs Increase the Tongue Weight Capacity on a 2005 Ford Escape
will the Timbren Suspension kit allow more tongue weight to my 2005 ford escape. I would like to hall 2 dirt bikes on a rack system connected to my 2inch receiver, but the max tongue weight on my suspension is 300 lbs. It says that the Timbren...
Which Trailer Hitch Fits 2020 Ford Escape and Allows Hands Free Liftgate to Function
Was told I could not put a hitch on my Escape because of power liftgate. Do you have a hitch that will work with this? | We have the Draw Tite hitch part # DT92RR that was tested with the hands free liftgate function of your 2020 Ford Escape...
Trunk Mount Bike Rack For 2014 Ford Escape
Recently purchased a 2014 Ford Escape. I would like to know if this rack will fit on the escape and what the installation setting would be as well as where should the lower arm sit on the vehicle | I just spoke with my contact at Thule, and...
C51180 is the auxiliary cable needed?
I own a 2017 Ford Escape Titanium, just purchased and installed the Class 3 hitch from you guys with the light wiring and a 4 to 7 adapter I have not connected the blue and yellow wires to anything Im interested in the Echo since I dont want...
Need to Replace Damaged Anti-Rattle Bolt on Newer SwingDaddy Bike Rack
I need to replace the anti-rattle bolt that is used on a newer version of the Yakima Swing Daddy. There is a large locking knob this is ok that connects to a long bolt to tighten to the 2inch hitch. The threads are stripped out on this bolt,...
Trailer Hitch Recommendation for a 2014 Ford Escape
I am considering a hitch for my new 2014 Ford Escape. The less obvious ones require removal of a portion of the heat shield. Is there any negative consequence to that? Any problems retaining water and debris? | Removing the heatshield to...
Trailer Wiring Recommendation for 2011 Ford Escape without Tow Package
your website is confusing it says my 2011 ford escape has backup sensors. Where? Just need cheap wiring harness that will work with a trailer. | I found the question you referenced where someone asked us which trailer wiring harness they needed...
Fitment and Compatibility of Wiring Harness on a 2004 Ford Escape XLT
Will this wiring harness kit work with my 2004 Ford Escape XLT? | According to my information the wiring harness # 118426 is not a confirmed fit for your 2004 Ford Escape, but I do have a wiring solution for you. If your Escape XLT has the...
Locking Hitch Pin Recommendation for Use with the Curt Cargo Carrier part # C18152
I am looking at purchasing the Curt Cargo Carrier: http://www.etrailer.com/Hitch-Cargo-Carrier/Curt/C18152.html I would like to get a pin that would be locking. Which ones would work for this purpose? Thanks | For a locking hitch pin to use...
Recommended Roof Rack For Surf and Stand Up Paddle Boards on a 2020 Ford Escape Naked Roof
I need roof rack for 2020 escape titanium. It has full length sun-roof. It also has some kind of soft rails factory installed. I surf and SUP and will need pads or rack. we like thule and yakima. | I recommend the Thule WingBar Edge Crossbar...
Can 10 gauge Wire be Ran from Battery Isolation Solenoid to Positive Terminal on Trailer Battery
can i run #10 wire from voltage out to trailer direct to + post on the trailer batt. | Yes, you could run some 10 gauge wire, such as # 10-1-1 sold by the foot, from the battery isolation solenoid # PK5231201 to the positive terminal on the...
Where to Connect the Stoplight Wire on Brake Controller Pigtail
Received Tekonsha brake control package, not clear on where to connect to stop light circuit. Information only goes to 2005. I am installing this on a 2006 Escape Hybrid. | To install the Tekonsha PowerTrac Brake Controller # 39523 in your 2006...
Can 4 Kayaks be Carried on Malone XtraLight Trailer
Is it possible to apply a 4 kayak rack holder to my malone Xtraligh trailer #MPG525Gt | Yes, you can definitely use your Malone XtraLight to carry 4 kayaks! To do this I recommend using 4 sets of the Yakima JayHook Kayak Carrier # Y04084 which...
Parts Needed to Install a 6-Way and a Brake Controller on a 2006 Ford Escape
HELP! I recently installed a class III hitch and 4-way wiring harness on my 2006 Ford Escape. I am about to install a 6-way adapter to tow my trailer, but I need to add a brake controller. I cant figure out what I need to buy to accomplish this....
Trailer Hitch Receiver Compatible with Hands Free Lift Gate Sensors
Does the sensor need to be relocated so that it can still be used? I have a 2014 Ford Escape Titanium.... | For your 2014 Ford Escape Titanium, you do not need to relocate the sensors but the working areas will be limited to either side of...
Bike Rack for a 2017 Ford Escape Titanium and a 2012 Ford Explorer
Hello, I need a bike rack that will fit a 2017 ford escape TITANIUM. Needs to hold a minimum of 2 bikes. It would be great if it fit a 2012 ford explorer too, but doesnt have to. | You have a lot of great options for a 2017 Ford Escape Titanium,...
Fit of Draw-Tite Class III Receiver Hitch on 2016 Ford Escape
I have a 2016 ford escape with a factory installed tow package. How do I determine if it is a class 2 or3 ??? | The fit note you mention is actually referring to the Class II factory hitch. Certain hitches cannot be installed on vehicles that...
Replacement Parts for Older Thule Hull-A-Port 835XTR J-Style Kayak Carrier
Hello, I am looking to refurbish my Hull A Port 835XTR J Cradles. They are great and served us pretty well. I found the bracket #853-5837 and the base pad # 8535302 and the carriage bolts # 915-066-554 So I am well on my way to success. I...
Filter Your Search
Contact and Help