B&W Biker Bar Compatibility With Custom Harley and Street Glide
Buddie ordered BWMC2304 can I use this for my 2016 HD Streetglide ? | The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson 1-1/2" Custom Frame # BWMC2304 will fit frame tube diameters between 1-3/8" - 1-1/2" and frame...
Trailer Wire Harness for 2006 Harley-Davidson FLHTi Electra Glide
Im having a hard time trying to find a plug and play harness for a 2006 electric glide standard with 5 wires out. At this time my Trailer has a flat 5 pin but I will eventual go to 5 pin round. The right harness is my big issue. Thanks | The...
Can The 7-Way Trailer Connection Be Used To Power Winch If Vehicle Is Running
Can the 7 pin plug be used to power the winch if I have my truck running? | The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of too small a gauge to allow enough power to pass through to run a winch. The...
Does Motorcycle Need to be in Gear or Neutral When Transporting with the B&W Biker Bar
Should the bike be in gear while hauling or in neutral? | When securing your Harley-Davidson with a B&W Biker Bar like the part # BWMC2301 you referenced it really doesn't matter if you have it in gear or in neutral. The bar keeps your bike...
5-Way Flat Trailer Wiring Harness for a 1999 Harley Electra Glide
Hello, It appears you have a flat 4-pole trailer wiring harness for my 1999 Harley Electraglide, .... Hopkins Custom Fit Vehicle Wiring - 33525 Plug-N-Tow R Wiring Connectors provide a no-hassle, quick and easy way to wire your vehicle. but...
Parts Needed to Install 4-Way Trailer Wiring Harness on 2012 Harley Davidson Electra Glide
I have a 2012 Harley Davidson Electra Glide motorcycle. I am attempting to convert the current 5-wire set-up to a 4-wire system. Bike currently has separate Brake, Turn Signal, and Tail Lamp wires. I need to combine the Brake and Turn Signal...
Installing the Hopkins Smart Hitch Backup Camera on a 2013 Ram
I have this camera but it doesnt work on my 2013 Ram. Why not? | We have learned that the 2013 and newer Ram trucks do not provide enough voltage to power the Hopkins Smart Hitch, part # HM50002, simply by plugging it in to your truck. In...
Do Factory Bump Stops have to Be Cut to Install Air Lift Air Bags on a 1997 Lexus LX450
Hi! Do I need to hack off part of the bump stop for this installation? Please send install procedure specific for a 1997 Lexus LX450. | Yes you will need to trim away the factory bump stops to install Air Lift helper springs # AL60728 on your...
Will B&W Biker Bar Tie-Down System # BWMC2301 Work for 2015 Harley Davidson FLHTK
Just want to make sure this will fit My 2015 FLHTK? Part Number BWMC2301 And does it come with anchor plates? | The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 referenced in your question is confirmed to fit all model years of the...
Correct B&W Biker Bar for a Harley Davidson Electra Glide Limited Low
Which model will work with my Limited Low. | I spoke to my contact at B&W and they informed me that the correct B&W Biker Bar Motorcycle Tie-Down System for your Harley Davidson Electra Glide Limited Low is the part # BWMC2301. I have attached...
Wheel Chock Recommendation for Harley Davidson Electra Glide on Trailer
lIhave a Harley Davison o 6 electra guild need to know what I can use to secure front tire in a motorcycle chock? | Since your Harley isn't one of the standard fits that they have a B and W Biker Bar designed for you would need to use the Custom...
Which B and W Biker Bar Fits 2013 Harley Davidson Ultra Classic
Hi can you please let me know which biker bar will fit my 2012 ultra classic | For a 2012 Harley Davidson Ultra Classic the correct Biker Bar is the # BWMC2301 that you referenced. |
Draw-Tite VS Curt Class III Receiver
I have a 1997 Lexus LX450 with the Draw-Tite Class III receiver installed. It has been there for quite a while and is has rusted so I thought it was time to replace it. I would like some information on Draw-Tite vs Curt for the class III receiver....
Brake Controller Installation on 1997 Lexus LX 450
looking for a Prodigy direct plug in wiring harness for a 1997 Lexus LX450. Do they make one or do I have to use a universal and wire it myself? | The 1997 Lexus LX450 was not factory equipped with the connector under the dash for a plug and...
B&W Biker Bar Motorcycle Tie-Down System For a 2008 Harley Davidson Electra Glide Classic
Which product will fit my 2008 Electraglide classic. Harley | The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 is designed for the touring line of Harley Davidson motorcycles. I do recommend verifying your frame has the frame tube diameter...
What Size Dowel Nuts Do I Need for My Vehicle?
Where can I find the dowel nut replacement bolt for gutter mount. Its for an 1996 landcruiser | We do have plenty of replacement dowel nuts like the Replacement M6 x 16 mm Dowel Nut for Rhino-Rack Accessories # RR56TB which are M6 x 16 mm threaded...
Which B&W Biker Bar for Harley Davidson Ultra Limited Low FLHTKL
I have a 2015 Harley Davidson Ultra Limited Low FLHTKL. which biker bar is correct for this bike | The 2015 Harley Davidson Ultra Limited Low FLHTKL is classified as a touring bike, so you'd want to use the B&W Biker Bar Motorcycle Tie-Down...
Converter for Wiring Motorcycle 5-Way to Trailer
Wiring my 89 electraglide to my piggyback trailer. Hi I bought your round 5 pin plug to fit my harley end,then cut off flat 5 from trailer. Can only get blinkers. Any ideas? | Since you have a motorcycle it almost certainly has separate tail...
Replacement Windshield Wiper Blades for 1997 Lexus LX 450
Why is one 16inches and one 18inches when both should be 18? 1997 lx 450 is the vehicle. is the scrubblade bigger? and has clearance issues? | Actually, Scrubblade recommends the # SC87FR 18 inch blade for the driver side and the # SC67FR 16...
Left Signal on Trailer Flashes when I Indicate Right Turn
I have a 96foot LX450. When I signal a left turn all works as it should. When I signal right, the lights on the right side passenger side of the trailer go out and the left turn signal blinks on the trailer. All the lights work properly on...
5-Pole Round Connector for Trailer to Match Connector on 1989 Electra Glide Harley Davidson
Trying to set up a small piggyback trailer. My female on bike is a 5 round pronge. And is a very small receptacle. Trailer is flat 5. Suggestions? | For the 5-Pole round connector on your 1989 Electra Glide Harley Davidson, like part # PK11502,...
Will Sirius XM Radio Receiver Work with OEM Radio on 2009 Harley-Davison Ultra Classic
SiriusXM Satellite Radio Receiver Work on harmon cardon Harley radio Stereo that is XM Ready | XM radio device compatibility can vary depending on the generation of the items. Older systems may not always function with latest-generation items....
Rockford Fosgate Hide-Away Receiver on HD FLHTC
Will the Rockford fosgate hide away receiver work with a 2008 harley flhtcu Electra glide classic? | Yes, although is may not be as compact as you prefer for a bike, even a touring frame such as the FLHTC. You need the Remote for Rockford Fosgate...
Recommended Tire Chains For Off-Road And Snow Use On 1996 Lexus LX450
Please recommend snow tire chains for my 1996 LEXUS LX450. The truck has a 2inch lift for additional ground and tire clearance. Tires are Goodyear Wrangler Duratrac 265/75-16. The chains will be used on four wheels on snow and ice covered paved...
Filter Your Search
Contact and Help