Adding Tow Bar Wiring to 2018 Toyota Camry Being Towed on a Dolly
I have a 2018 Toyota Camry that I dolly tow behind my motorhome. I would like to have the car lights work with the motorhome and dolly lights instead of magnetic trailer lights, do you have a conversion kit for this application. | You can add...
Parts Needed to Re-Wire Car Hauler Trailer Lights and Brakes
I have an older car hauler type trailer. I believe it was converted from some other kind of use. Maybe a mobile home or something as it has some heavy duty 3inch square tubing for the frame. The wiring on it is kind of a mess and Id like...
Replacement Horse Trailer Door Lock for 1998 Featherlite
Hello, I am looking for a down head door latch for a 1998 Featherlite horse trailer. See attached picture. I need the full mechanism. Do you all by chance have this part or know where I can find it? Thank you! | The Bauer Product Door Lock...
Recommended Entry Door Lock For a 2-14/16" Wide By 4-3/4" Tall Cutout Hole
Mine is 2/14.16 wide So that is ok. But it is 4/34 tall That is 3/4 inch too tall. Please Help Thank you, | The closest option we carry to fit your 2-14/16" wide x 4-3/4" tall cutout is the Bauer Products Motorhome Door Lock - Black # BA64FR,...
Replacement Entry Door Handle for Horse Trailer with 4x4 Inch Opening
Have a gooseneck enclosed trailer with side door, need entry door lock/latch. Mine measures 5.5 wide x 5.25 tall with lock feature and inside pull handle. Cant seem to find one this size. Rough opening appears 4x4. any part number or info...
Installing HM20048 Molded 7-Way Trailer Connector on Surge Brake Equipped Boat Trailer
I want to buy the hopkins 7-way molded trailer wire connector HM20048 for my boat trailer.The question that I have is that my trailer come with surge type actuator that has electric reverse lockout, which wire on the Hopkins should I connect...
Could Bauer Products European Style Entry Camper Door Lock Fit 2021 Lance 1995
Would this fit a 2021 Lance 1995 travel trailer? | Yes the Bauer Products European Style Entry Camper Door Lock # BA38AR would fit the latch cut out of your 2021 Lance 1995 travel trailer. |
Converting 4-Way of 2001 Toyota Tundra to 5-Way to Tow Boat Trailer with Surge Brakes
I have a 2001 Toyota Tundra that currently has a factory flat for trailer wire harness. I am acquiring a boat/trailer with surge brakes and a flat 5 wire connection. Is there a plug in conversion for my truck to replace the flat 4 with a flat...
Where is the Power Source For Wiring Electric Trailer Brakes Located?
So when you say the trailer brakes need to hook to a ground and a power source is that power source the blue wire from the 7 way box? | The power source for your electric Trailer Brakes # AKEBRK-35-SA will come from the blue wire in the Junction...
What Gauge Wire Should I Use For Wiring LED Marker Lights
When adding mini led marker lights to existing, what gauge wire? And solid or stranded? | When installing marker lights we recommend using 18 gauge wire like # SWC97FR. This is stranded wire and is what we typically use when wiring marker lights...
Parts Needed to Add Electric Drum Brakes to Pop-Up Travel Trailer
I have several questions. I have a new pop up trailer and want to add brakes to it. It already has the 4 hole flange to mount them and has the 7 pin plug for my vehicle. is there anything I need besides the brake assembly and the hub with drum?...
Solution for Needing to Replace Bargman L-400 RV Latch on Travel Trailer
I have a discontinued Bargman L-400 lock on my 2005 Escape travel trailer. Im looking for a replacement that can be locked from the inside while we are camping. The current lock and opening are 6 7/8 x 2 7/8. I would need something that fits...
Rotary Latch Style RV Entry Door Lock
I have a motorhome with the cut out opening of 4-1/2 Wide 6-3/4 H, with dead bolt in the middle, witch door lock addy. will it fit? | Thank you for the pictures, from them I see that you have a rotary latch style. We currently only offer two...
Recommended Right Hand Keyless Entry Latch
Im looking for a keyless entry lock, with deadbolt. I have a 2003 Damon Intruder 375. The cutout is 4 3/4inch H X 4 7/8inch L. The hinges are on the right side of the door, looking at it from the outside. Can you make a recommendation of...
How to Wire a Pollak 11-609EP Trailer Connector # PK11609
Inside pa Pollak 11-609EP I dont see connection labeling | The connection labeling is written in raised lettering just to the outside of the poles where the wires actually connect to the connector. The connectors are actually labeled with letter...
Installing Wiring for Truck Cap Stop Light on a 2014 Chevy Silverado
is there a seperate wire for a connection on a silverado for a cap stop light. | On your 2014 Chevy Silverado, there are a couple of options to connect your Truck Cap stop light to your truck. The CHMSL (center high mount stop light) on your...
Will a Trailer Brake Controller Help Improve Braking For RV When Pulling A Trailer Without Brakes
I have a 14 ft flat trailer that dose not have brakes, will a brake controller on my motorhome work to help the brakes work better to slow down with a load when pulling that trailer? | Since your 14' trailer does not have brakes there is nothing...
How Do I Wire LED Flood Lights on My Camper to Use When Backing Up?
I would like to add a switched LED Flood light to the top of my slide in truck camper to use when backing up a trailer. Can I tie into the power from one of the RVs running lights? There is no easily accessible way of running a wire direct...
Replacement Entry Door Lock Options For A 2024 Jayco Greyhawk 29MV
I have a 2024 Jayco Grayhawk 29MV and want to change the door lock, what style does it use? Thank you, | There isn't a guide that tells us what parts were used in your 2024 Jayco Grayhawk 29MV so you would most likely need to take it apart...
Parts Needed To Upgrade Utility Trailer Wiring And Change To LED Lights
I have a 5 x 10 foot utility trailer I want to rewire and install LEDs. I need the LEDs and wiring. I installed brakes on it that I've purchased from you about 2 years ago. My truck has a 7-pin connector and I already have the 8-pin male adapter. I...
Will Hopkins Vehicle Wiring Converter HM48915 Operate Turn Signals In-Phase with Vehicle
Hello I have a 1999 Nissan Frontier and as a part of my job my car must have a 2nd pair of tail lights fitted on the roof. The original car has separate turn/stop lamps and I would like to combine them for the 2nd set but i need to know if this...
Replacing Trailer Connector Wiring for Rockwood A122 A-Frame Trailer with 6-Pole Square Wiring
I have a Rockwood A122 A Frame trailer. On the trailer side I currently have 7 Way Trailer connector that connects to the Trailer wiring via a 6 Pole square connector. The Yellow wire aux is not wired to the connector. I would like to replace...
Availability of Stromberg Carlson RV Bunk Ladder With Longer Hooks
Hi I was wondering if you have different hooks for this ladder, I have Jack and Jack bunk beds double double in my trailer and the hook would need to span 4-5 inches before the bend in the hook, thanks | None of the bunk ladders we offer would...
Brake Controller Install on 2008 Jeep Grand Cherokee with Factory Tow Package
Several trailer dealers have refused to wire my 80550 to my 2008 Cherokee even though I have the factory tow package. They claim bad experiences in their past, mostly involving the Jeeps computer. What precautions should I take to wire it...
Filter Your Search
Contact and Help