Replacement Leaf Springs for a 4400-LB Axle on a 2016 Grand Design Refrlection
I have a 2016 Grand Design Reflection 29RS 5th wheel. The axles are 4400 LB rated and I need to replace the springs with something that has a little extra capacity, the stock springs have broken and are all flat. Which springs do you recommend?...
Can the CE Smith Post-Style Guide Ons Withstand Being Bumped Into By the Boat
I’ve got a 30 ft pontoon. I have trouble loading on windy days. Will these stand the pressure of the boat? I never load very fast, always be as gentle as possible. Thank you. | The CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall...
How to Pick Out a Replacement Grease Seal for a Trailer Hub
Hi, I am looking for double lip grease seals for a straight 1inch trailer spindle. I dont understand some of the numbering systems for seal identifying. If there are more than one seal for a straight 1inch spindle, please let me know what...
How Long Should Trailer Bunks be on Pontoon Boat Trailer
Good morning my name is Javahn and my question is I have a 16 foot pontoon boat the trailer is a 16-foot trailer give or take with the tongue add a foot. But my question is how long should the Bunk Boards be? Going off the Bunk Boards that were...
Options to Replace Calkins Double Roller Assembly on Boat Trailer
Hi I am looking for calkins boat trailer Double Roller assembly for my Keel and bow rollers. Cant find them online or any store and mfg is out of business. DO you guys know or have this part or something that can be used as a replacement? Thanks...
Should 12 or 18 Carpet be Used for 12 Long Bunk Boards
My bunk boards are 12foot long. Will the 12foot foot long carpet have enough length to cover them or should I order the 18foot long carpet? Do I need the extra length to wrap around the ends of the board? | Since your bunk boards are right...
Mounting Brackets For Fulton F008574 Wheel Fender
I purchased new fenders for my boat trailer not realizing they were not the same size the originals.The current mounting bracket do not appear ts if they will work and I cannot return the fenders different vendor. What is recommended mounting...
Spare Hub for Boat Trailer with Bearing Dimensions of 1-3/8 inch and 1-1/16 inch
Hi. I’m looking for spare hubs for my boat trailer. The bearing sizes according to my boat dealer are 1-3/8” and 1-1/16”. 5 on 4-1/2 lug pattern I’m not sure if it’s a 3500 lb axle | Based on your bearing dimensions you do have a 3,500 lb...
Maximum Height of Bunks On CE Smith Multi Sport Plus Boat and Kayak Trailer
The inflatable I am planning to transport is a Catamaran. The pads are supposed to fit up under the boat supporting the floor with the side tupes extending a few inches lower. So, the manufacturer strongly suggests that the pad mounts be able...
CE Smith Padlock Brackets for Spare Tire Carriers Compatibility
I purchased the CE Smith tire carrier. Will the threaded lock bracket fit the lugs? | Yes, the CE Smith Padlock Brackets for Spare Tire Carriers item # CE26002Z-2 you were looking at will fit the CE Smith Spare Tire Carrier for Trailers item...
What 60" Trailer Guides Do You Recommend for My 3 Inch x 4.5 Inch Trailer?
I have magic tilt trailer. 21 ft sea hunt triton I beam trailer frame 3 x 4.5 in. tall. which 60 guides should I order? Thanks, | The correct guides you need for your 21-foot Triton trailer are the CE Smith Post-Style Guide-Ons for Boat Trailers...
What is the Exact Length of the 12 Inch Yates Side Guide Roller # YR12243-5
What is the actual length of this 12inch roller, #YR12243-5, down to 1/16th of an inch? Will it work inside a 12inch bracket, #408300, without binding? | I went out to the warehouse and measured a few of the Yates Side Guide Rollers # YR12243-5....
Do CE Smith Bunk-Style Guide-Ons for Boat Trailers Get Used at the Same Time as Standard Bunks
should CE27660 guide on be used on trailer with bunks on the frame of the trailer at the same time. | Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers # CE27660 just helps you line up the boat properly with the bunks on your trailer...
Replacement U-Bolts for Bunks on Escort Bunk Trailer
i have a 1999 escort bunk trailer i need to replace the u bolts where can i buy them | We have bunk U-bolts like the CE Smith part # CE15283GA which measure 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter which is a very common size that would...
Replacement Idler Hub Options For a 30 Year Old Homemade Trailer With 68149 & 12749 KOYO Bearings?
Hi, I have a 30 year old 4x8 utility trailer. The hub has an inner bearing 68149 Koyo and an outer bearing 12749 Koyo. The bolt pattern is 5 4.5. I’m trying to find a set of replacement hubs. The current hubs are brake rotors with studs - the...
Replacement Mounting Bracket For 75" CE Smith Post-Style Guide-Ons # CE27636
I got the 75 inch guide on and got carried away with an impact on the first bolt and broke the corner bracket that the post bolts into. What is the part number and can I buy a new bracket through you? | We have the Replacement Upright # CE27605PG...
Will Fulton Single Axle Trailer Fender Work With Larger 13-Inch Tires On 1994 Shorelander Trailer
Im not able to find tires and rims for my 1994 Shorelander trailer which are st155 80d 13 tires. The best direction for me is to remove the existing fenders and replace them with larger ones that will accommodate st175 80d 13 tires. Will the...
Securing CE Smith I-Beam Clamps for Boat Trailers That keep Falling Off
I have this style fastener on my new trailer. One side keeps falling off. It happens after I pull the empty trailer out of the water, up the launch. Each time i replace it, I tighten as much as possible, manually. Should I use an impact...
How Does the CE Smith Winch Stand # CE31013G Mount to Trailer
What is the suggested hardware for mounting the CE31013G winch stand and what are the top holes on the bottom of the mount for ? | To mount the CE Smith Winch Stand # CE31013G on a trailer requires you to slip the lower portion with the holes...
Can CE Smith Galvanized Panel Bracket be Used with a Stainless Steel Shaft
Is this 12inch bracket, # CE10305G, hot dipped galvanized? Can I use a stainless steel shaft in it without fear of corrosion? Would they be compatible? If not, do you sell a compatible 5/8inch x 26inch galvanized shaft that could be used in...
Replacement for a 4-1/2" Long Keel Roller on a Boat Trailer
Im looking for 4.5 inch long rubber keel roller for my boat trailer. I see several 4 inch and 5 inch but I need 4.5 inches. Is this something you can source? Thanks | The 4-1/2" keel roller is a size commonly found in Australia. You might consider...
Availability Of CE Smith Post-Style Guide-Ons In Larger Sizes
Does this part come in a longer size? Reviews I’ve read seem to need more length to see above the water after backing down the ramp? | Indeed we do sell the CE Smith Post-Style Guide-Ons for pontoon boat trailers in larger sizes. The 22" long...
Boat Trailer Guide Ons with Longer Horizontal Length for Fitting Wider Boat
I am looking for boat trailer guide arms for a tripple axle boat trailer that are wider than normal my boat has a 9 6 beam | The widest post style guide ons we have for a boat trailer are the CE Smith part # CE27640 which has a lower horizontal...
Can Malone Trailer Be Converted to Having Bunks for Launching Boats
Hi. I own a Malone Microsport kayak trailer with two crossbars. I want to convert it to a trailer suitable for launching from a ramp. Is this possible? Is there a conversion kit available? | We have just what you are looking for with the...
Filter Your Search
Contact and Help