Ball Mount Compatible With An Older Putnam Hitch That Uses A 3/4 Inch Hitch Pin
I have aa older Putnam hitch that I need to get a new ball mount, preferably adjustable. the problem I have is the hitch pin is 3/4, not the normal 5/8 I see. does anybody make these? Or do you any solution for this? Thank you | I took a look...
Are Spacers Needed to Install Reese 5th Wheel Universal Base Rails on a 1997 Ford F-250 Long Bed
install a 5th wheel hitch on my 97 ford f250 long bed do spacers need to be installed between the bed and the frame? if so, should they be aluminum or stainless? | You will not need spacers to install the Reese Universal Base Rails and Installation...
Hitch to Fit 1997 Motorhome Chassis
Looking for a class 4-5 for my 97 Ford chassis motorhome. I have a 9990# GVWR inclosed 32 ft car hauler. The frame is 35 in wide. The mounting brackets need be 2 1/2 - 4 1/2 in deep. Thanks for any information. I dont have a problem with...
Installing the B&W Turnoverball Underbed Gooseneck Hitch on a 1997 Ford F-350 with Duraliner
Will the BandW Gooseneck trailer hitch work with a Duraliner -in bedliner? | You will have no problem installing a B&W Turnoverball gooseneck hitch in your 1997 Ford F-350 with the Duraliner bedliner. You will have to cut through the bedliner...
How Does LED Clearance Light part # MCL0030ABB Install
How are they mounted? Is the front lens removable? | To mount the LED Clearance Light part # MCL0030ABB you would need to pry off the lens using the slots on the bottom of the lens and then use the mounting holes that are behind the lens through...
Recommended 5th Wheel Hitch and Install Kit for a 1997 Ford F-250HD
Will this hitch install on a 1997 F-250HD longed. Are there custom brackets available for this truck, it does not have overload springs. Thank you | Yes, the Curt E16 5th Wheel Trailer Hitch w/ Rails and Universal Installation Kit part # C16116...
Will CIPA Mirrors for 1997 Ford F-250 Help When Towing 8-1/2 ft Wide Trailer
Will these mirrors work if towing a car trailer 8 1/2 ft wide? They will be going on a 1997 Ford f250. Thanks, | An 8-1/2 foot wide trailer is pretty wide but the tow mirrors part # CM11000-2 are going to help quite a bit to see behind your...
Availability of Replacement Hardware for Draw-Tite Hitch 41004
Do you sell just the bolt kit for hitches? Looking for a kit for the Draw Tite 41004 hitch. Thank you | We do have replacement hardware for the Draw-Tite # 41004 hitch. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK....
Correct Firestone Ride-Rite Air Helper Springs - Front Axle for 1997 Ford F-350 4x4 Powerstroke
Good day, WIll this kit work on the front axle 4x4 97 f 350 powerstroke? the diagram shows the shock is on the outboard side of the airbag. Does this kit position the airbag forward of th e centerline of the leaf spring as the shock s mounted...
Is the etrailer Electric Trailer Brake Kit Quality on Par With Other Brands
Why are these so much less than the other brands that you sell, are they lacking in quality? | The Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA and other etrailer branded brakes...
Timbren Suspension Enhancement Fit For 1997 Ford F-250HD 4WD
1 Whats the difference between the TFF2504A and the TFF3504A? The cataloging indicates 97 F250 and F350 fitment. 2 Whats the difference between TFR350SDF and TFR350F ? My truck is a 97F250 4x4 8 dump bed steak side. Fire service runner. Loaded...
7-Way Adapter Recommendation for Adding 7-Way to the Bed of a Truck
I installed this plug on my 97 F250HD last year. Is there a way to add a 7 way in the box while keeping this one in use? | Yes, what you need is a fifth wheel/gooseneck 7-way setup like the # 41157. This kit installs in line with the 7-way...
Availability of 1/2" Diameter U-Bolt for 3" Axle at Least 8" Long
Hi, I am looking for a 8+ long, 3inch axle, 1/2inch diameter, U bolt kit. including 4 Thanks, | The longest 1/2" diameter U-Bolt we have for a 3" axle is the 7" option that comes with the Kit # APUBR-8 that you referenced. We do have longer...
Can the Super Grip Chock Wheel Stabilizers for Tandem Axles be used with Tire Covers on
Can this item be used with wheel covers in place? If not can wheel covers be cut allow for placement of this item? | I contacted the manufacturer about if the Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers # UF21-001091 can be used...
Tow Mirror Recommendation for 1997 Ford F-250 HD
I have a 1997 F250 HD Supercab 7.3 4x4. The article by expert Bob shows 3 mirrors. Mine are the ones in the middle pic that he says part number 11501 or 11502 will work with. My mirrors are power mirrors. I want to replace them with power...
Where Would the Center of the King Pin Be Towing Fifth Wheel Trailer with 1997 Ford F-350/350
how far is the center of the trailer pin from the back of the cab? | Typically when a fifth wheel trailer is installed in the bed of a truck the center of the jaws of the hitch where the king pin will sit will be either right above the rear...
Can I Use an Air Lift Suspension System # AL88298 with a Gooseneck Hitch on a 1997 Ford F-250?
i have a 1997 F250 HD w/out the helper springs, i want to buy a gooseneck hitch and a set of air lift bags for the rear, what would be the best setup, on the air lift website, it states that the air lift kit only works with a reese hitch | The...
Best Way to Tow a 5th Wheel with Flat Bed Truck
I am trying to find the shortest legs I can for my Q20 head. I have a flatbed 4x4 that sits pretty tall. The replacement legs say 13inch is the lowest. I was wondering if I could go to a 24k or 25k leg if it would be any shorter | I have a solution...
Is Drilling Into Frame Required to Install B&W Gooseneck Hitch on 1997 Ford F-350
Will in need to drill into my frame on my 1997 F-350 4X4 Diesel I HATE HAVING TO BRING IT TO SOMEONE THEY TAKE YOU ON INSTILLATION FEES. | If your 1997 Ford F-350 does not have Overload Springs, you will not need to drill into the frame in order...
Curt X5 Adapter Recommendation for 1997 Ford F-250 with B and W Turnover Ball Hitch Installed
I just purchased a 5th wheel camper and it came with a PS-1001-165T Xtender 5th wheel slider hitch by RBW Industries. I have a 1997 F250HD LWB with a BandW Turnover Ball Hitch in it. Can I use the Curt X5 Fifth Wheel Adapter for B and W Square...
What Size Hose Is Needed to Add to Transmission Cooler # D13105 for a 1997 Ford Heavy Duty 7.3 Liter
Hello, When ordering extra hose of the D13504. What size should I order, are is it all the same size? | You can get 25 feet of 11/32 inside diameter hose using part # D13007. We also have a 4 foot length, # D13003. The hose that comes with transmission...
Availability of Running Boards for 1997 Ford F-250 HD SuperCab
I am looking for running boards for a 1997 Ford F-250 HD XLT extended cab 5.8l gas. I would be interested in either the nerf or regular, as wide as possible. I also need mounting brackets or the bolt on kind. If you can help me | It sounds like...
Highest Number of Axles Brake Controller Will Work With
I have a bogie style trailer with 12 wheels that have 12 sets of 12 inch brakes. Will I need a special controller to run these brakes? Also wondering what size wire I will need to run to the brake assemblies. | There is a specific type of brake...
5th Wheel Trailer Hitch and Installation Kit for a 1997 Ford F250 Short Bed
I am looking to install a 5th wheel rail system in my truck and have not been able to find any vehicle specific instructions. Would you be able to tell me how far the rear bracket needs to be mounted from the end of the truck bed? | For your...
Filter Your Search
Contact and Help