Can a Heat Shield be Sandwiched Between the Frame and Trailer Hitch
Removing portions of the heat shield, render it unsupported by the muffler hangers. Will the 2 horizontal hitch bolts line up, if one were to only remove enough heat-shield material to expose bolt holes? Thus sandwichinginch the shield between...
Recommended Cargo Carrier For Wheel Chair on 2010 Chevy Avalanche
Is there anywhere we can actually see your product. We are in sw michigan. our wheel chair is 24x36. would be putting it on a 2010 chev. avalanche pickup with a 2in hitch. Could I get into bed of truck with carrier on? My husband is paralyzed...
What Circuit Functions Are Carried on Jayco 6-Square Trailer Wiring
If purchasing the 6 square to 4 prong adapter, will this power the running lights on my trailer as well. What is the extra wiring on the 6 prong for, Im guessing one to charge the battery, can I run a separate wire just for that? Thanks. | Jayco...
Ladder Rack Recommendation For My 2005 Toyota Tacoma With Leer 122 Canopy
I would like to purchase a ladder rack that will fit over my Leer 122 canopy on my 2005 Toyota Tacoma extended cab truck. 6foot box. Thank you | I do have a ladder rack that will fit your Leer 122 Canopy. My recommendation will require drilling...
What Is Needed To Seal Behind The Trailer Side Marker Light 328-K-51 During Installation?
Hi guys. Do you have a recommended seal that goes along with this clearance light ? 328-K-51 Thank you. | I recommend using Clear Silicone # FAS59FR when installing the LED Trailer Clearance or Side Marker Light # 328-K-51. This will allow...
How To Remove Optronics LED Clearance or Side Marker Light # MCL40RB For Replacment
I need to replace an MCL40RB side marker light on my travel trailer. How do I remove the lens from the existing marker without breaking the light? Once I have the lens off the light, how do I remove the inoperative marker from the trailer?...
Trailer Brake Controller Wiring Guide For A 2013 GMC Yukon
I saw a reference to an article to finish the trailer brake wiring in a 2013 GMC Yukon. But I wasn’t able to find the article. Can I get this please? Thanks in advance | Sure thing! I have attached the article below that goes into detail about...
Trailer Hitch Installation on A 2013 Chevrolet Volt With Rusted Weld Nuts
I am trying to install the Curt trailer hitch #C11221 on a 2013 Chevy Volt. The welded nuts on the passenger side are very rusted over. I cant even see the threads on the nuts. Ive tried spraying with PB Blaster and using a nylon brush as...
Which Nuts Needed to Complete Brake Controller Connections At Fuse Box on 2007 GMC Sierra New Body
What size nut do I need to connect the wires to the stud for the trailer brake system for a 2007 gmc Sierra new body? | There are two threaded studs on the front of the power distribution box (closest to the front bumper) that will need to have...
Red LED Ford Hitch Cover Recommendation
Im looking for a Red LED Ford hitch cover. | We have a red, illuminating Ford hitch covers you should check out. It is the Ford Brake Light Trailer Hitch Receiver Cover # CR-007F. I attached a video of this hitch cover for you. |
Can 4-Way Trailer Connector Be Routed through 2001 Oldsmobile Silhouette Cargo Area Outside the Van
how to route the cable wiring outside the van through the van body 2001 oldsmobile van with rear air conditioning. Air condition unit on this drivers side of van. I had no problem connecting the T but how to get to the trailer? | When installing...
Installation of Hopkins Backup Sensor System with Audible Alert on 2015 Honda Civic
I have a 2015 Honda Civic LX Coupe, certainly no exotic but it is my daily driver and I am concerned about tapping into the backup light harness. I am not certain how to find it or where to locate the ground. I watched your install videos and...
Replacing Trailer Connector Wiring for Rockwood A122 A-Frame Trailer with 6-Pole Square Wiring
I have a Rockwood A122 A Frame trailer. On the trailer side I currently have 7 Way Trailer connector that connects to the Trailer wiring via a 6 Pole square connector. The Yellow wire aux is not wired to the connector. I would like to replace...
Is Hardware and Sealant Included With Fan-Tastic Roof Vent Fan # FV802250
Does this vent Part# FV802250 Come with mounting screws and putty to seal between roof and vent? thanks | The Fan-Tastic Roof vent fan you mentioned includes the mounting hardware, but no sealant. I'd recommend using the TemPro Silicone Sealant,...
Parts Needed to Install New 7-Way and Wiring on a Trailer
I am building a trailer, looking for a 7 pin harness that is complete. Wiring to tail lights and markers and to wheel brakes. Dual axel trailer. Thank you for your help | Starting with a trailer side 7-Way connector you can use # H20042 which...
Parts Needed to Add Electric Drum Brakes to 3500-lb Front Axle of Tandem Trailer
Unless I mist it can you put together a package for me? I have a typical 3500 lb axle, I have brakes on the rear axle and I want to add brakes to the front one. The rear axle has Dexter electric brakes 10X2 1/4. I dont know the wheel stud...
Carrying a Flint Hill Goods Mobility Scooter Carrier And Towing a Heavy Trailer at the Same Time
I purchased a Curt 30x50 mobility scooter carrier from you. Is there a 2 inch receiver extension with a drop/rise that will give me room and lift the carrier up? So I can carry the carrier on top and bottom for heavier towing. Plus when carrier...
Weight and Capacity of Flint Hill Goods 30x50 Wheelchair Carrier
How much does the Flint Hill Goods FHG77ZR weigh? Trying to figure out what to order for my wife's new electric wheelchair. The chair itself weights 151# according to the operator's manual. | The Flint Hill Goods 30x50 Wheelchair Carrier# FHG77ZR...
Is TremPro 644 Silicone Sealant # 0160297 Paintable
I’m looking to revamp a military cargo container and it requires new sealant. Is this paintable or is it recommended to add after painting? | Yes the TremPro 644 Silicone Sealant # 0160297 that you referenced is paintable. |
Wiring Pattern for a 7-Way RV Trailer Connector on a 2001 Chevrolet Silverado Without Factory Wiring
Im looking for the wiring pattern on a 2001 silverado 2500 to hook up a trailer | To install a 7-Way wiring connector at the rear of your 2001 Chevrolet Silverado without a factory 7-Way or a factory 4-Way connector, I recommend using the 7-Pole...
Cargo Carrier with Ramp Recommendation for 2012 Honda Odyssey
I need a cargo Carrier hitch with ramp for my 2” receiver oN my 2012 honda odyssey. Lowest point on my hitch is 10.5 “ from ground. I would like an aluminum carrier with a foldable ramp. Also would like is to have a riser s type curve on...
Recommended Installation Screws for 1/2 Inch Metal Loom Clamp # A0500
I want to installing a 20 ft. Wishbone 4-Way Trailer Wiring Harness with 30inch Ground Wire, Code: A20WB on an open trailer. What type and size self tapping screw do you recommend for attaching the Metal Loom Clamp - 1/2inch , Code: A0500? Thanks,...
Recommended Light for RV Storage Compartment
I am looking for a good light for the storage compartment of a RV. What do you recommend for this application? | The LED Utility Light with Switch part # 328-001-504E is my recommendation for a storage compartment light as it is battery powered...
What is the Difference Between Redline Wet Bolts 126B2 and 34007-187-00
What is the difference between bolt 126B2 and 34007-187-00? They're both for 1.75 inch wide springs. | The main difference between the Redline Wet Bolts # 126B2 and # 34007-187-00 is that the 126B2 has a 9/16" threaded end while the 34007-187-00...
Filter Your Search
Contact and Help