Total Length of Bearing Buddy 2441
What is the overall length of the bearing buddy 2441 | I went out to the warehouse and found that the total length of the Bearing Buddy Bearing Protectors # BB2441 is 2-1/4" with the bra installed. |
How to Route Wiring for Hopkins Backup Sensor # HM60100VA Into 2012 Dodge Ram 1500 Crew Cab
Newbie here. I would like to put these on my truck, but have a beginners question. How do I get the cabling into the cab for the speaker? Im trying to understand some of the comments from others, but dont quite understand. For example, Ive...
Can a 2004 Dodge Ram SLT 4x4 Tow a 6500 Pound 2006 Nomad Trailer
I am looking into purchasing a 2006 Nomad M2930 with a weight of 6500. I am wondering if my 2004 Dodge Ram SLT 4x4 extended cab short box 4.7 liter engine would be able to tow that weight safely. I have looked on the dodge website but am unable...
5th Wheel Trailer Hitch Installation Kit for a 2013 Dodge Ram 1500 Crew Cab
I am purchasing a curt fifth wheel hitch from a private party. he has a chevy truck. I have a 2013 dodge 1/2 ton crew cab. I dont believe the chevy brackets will fit my dodge. which brackets would be recommended? | For a 2013 Dodge Ram 1500...
Tire Chain Recommendation for a 2012 Dodge Ram 1500 Tradesmen Edition
What type of chains should I get for a 2012 Dodge Ram 1500 Tradesmen with 4 wheel drive? Or should I get cables? I use it mainly for minor off roading in the mountains on a decently maintained road during hunting season but the snow and ice...
Will the Convert-A-Ball Cushioned Weight Distribution Shank Fit a Curt Weight Distribution System
Is the Convert-a-Ball compatible with the Curt 17002 weight distribution hitch? | Both the Convert-A-Ball shank, # AMAC1, and Curt shanks have hole spacing of 1-1/4 inches on center so you can use the AMAC1 on a Curt weight distribution system....
Parts Needed to Install Brake Controller In 2007 Dodge Ram 1500 with 4-Way
What wiring adapter is recommended from the controller to the truck harness under the dash. I understand power will need to be hand wired to the 7 Pin connector as truck has only 4 wire service to 7 pin Connector. Great site. Thank you. | What...
Parts Needed to Install Brake Controller in 2001 Dodge Ram without Trailer Wiring
I just received your brake controller and the blue plug thats suppose to be in my truck is not there what do I do now | Does your truck have a factory 7-way at the rear of it? | NO it does not. | You will need to start with a 4-way (if you do...
Best Weight Distribution System for a Travel Trailer with 540 lbs Tongue Weight
Hello, I just bougth a 2013 Jayco White Hawk 29qsb. A 32 feet trailer, a Dry hitch weigth of 540 lbs and an unloaded vehicule weigth of 5400 lbs. I want to have the best system to be able to have a safe ride without sway. My truck is a 2014...
Class IV or Class V Hitch Availability for 2008 Dodge Ram 2500 with Roll Pan Bumper
I recently purchased an 08 ram 2500 and put a roll pan on and was wondering if there was a class 4 or 5 hitch out that that can be hidden behind the license plate. Any info would be greatly appreciated thank you | The Class IV and Class V hitches...
Distance from the Rear Rail to End of Truck Bed for Curt 5th Wheel Rail Kit C16420
is the 26 3/4 in dimension from the back of the bed to the center of the rail or to the edge of the rail | The most current instructions for part # C16420-204 state that the measurement from end of bed to rear most EDGE of the rear rail is...
Parts Needed to Install Firestion Ride-Rite Air Bags on a 2003 Dodge Ram 3500 With a 6 Inch Lift
I would like to know what parts I need to put air springs on the rear axle of my 2003 dodge 3500 with a 6 inch lift kit. It is 4x4 and a cummins diesel if that makes any difference. | Assuming the lift kit on your 2003 Dodge Ram 3500 has a...
Trailer Hitch Recommendation for a 2002 Dodge Ram 1500
Sorry but I found the instructions on whether to get a 13326 confusing. One part said if mfg before 11/02 get 13326 and the next part said if mfg after 11/01 get a different one. My mfg date is 03/02. I seem to be after 11/01 and before 11/02...
What Hitch That Fits a 1998 Dodge Ram 1500 Has A Correlating Installation Video For Instruction
Do you supply videos for the process of installing the hitch for my 1998 dodge ram 1500????? | We do have an installation video for the Curt Hitch # 13326 for a 2002 Dodge Ram which is in the same generation as your 1998 Dodge Ram 1500 so the...
2012 Dodge Ram 1500 Curt Reflex Brake Controller and Wiring Adapter Troubleshooting and Install
I have a 2012 Dodge Ram 1500 with tow package once I made all connections to the unit from the factory connections under the dash the unit will not calibrate by pushing and holding the button next to the display. It seems the unit only has power...
5th Wheel Trailer Hitch Installation Kit Options for a 2003 Dodge Ram 1500 Short Bed
I bought a new set of rails for my 2003 dodge short bed 1500 and seems like the instructions got missplaced. is there any way to get a copy of them I do not know the distances to install also my truck is a single cab. | There are several different...
B&W Headache Rack with Lights for a 2006 Dodge Ram Pickup
Hello. Im looking that the BandW headache rack with lights, but I want one in chrome or stainless. Is that possible? | The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights is only available is white part # BWPUCP7520WA or black part...
Carrying 150-lb Fishing Kayak on 2009 Dodge Ram 1500 Quad Cab
Im looking something to load a Hobie Pro Angler 14 on to my pickup and still be able to open the tailgate on a 2009 Dodge Ram 1500. The kayak weighs about 150 lbs so Im also looking for something to help with the task of putting it on the roof...
Troubleshooting 2005 Dodge Ram Factory Wiring with Inactive Center Pin
I have recently acquired a 2005 ram pickup 1500 slt package with hemi, well the 7 pin factory connection does everything my bass boat needs except disengage the surge brake when backing up. The factory harness just plugs in, I took that apart...
Brake Controller Installation for a 2005 Dodge Ram 1500
Dont have a blue connector on my o5 dodge ram 1500 for the trailer brake connector. Would the green one with 2 wires be it | The brake controller port on a 2005 Dodge Ram 2500 equipped with the appropriate tow package is located under the dash...
Recommended Suspension System For 2006 Dodge Ram 2500 With 2 Inch Lift
I have a 2 inch shackle in the rear of my 2500. I want to add a bump stop kit to rear but need to know clearance from axle to top of stop mount. They have spaces for lifts, but with a small , and the towing I do 5,000 lbs. I need a good stop...
How to Determine if 2007 Ram 1500 With Lift Needs Spacers to Install Air Bags
2007 Ram 1500 4x4 with 2 inch lift. Are spacer needed in order to install ride rite air bag kit? | It is possible you will need lift spacers when installing the Firestone Ride-Rite Air Helper Springs # F2286 that fit your 2007 Ram 1500, though...
Ram Truck Factory Puck System for 5th Wheel Hitches
I have a 2006 2500 mega cab ram and it has 4 holes drilled into bed and Im thinking it was for on of your puck hitch systems. Any help would be great thanks | The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched...
Winch Mounting Options for 2009 Dodge Ram Laramie 1500 Equipped with Westin Bull Bar
I have a 2009 Dodge Laramie 1500 4WD with a chrome Westin bull bar on it. I would like to add a winch. Do you have any suggestions on mount plate that will work with the Westin Bull Bar or even without it. I did not see anything but I know you...
Filter Your Search
Contact and Help