Determining The Correct RV Fireplace For A 2022 Keystone Carbon 358 5th Wheel Trailer
I want to add a fireplace in my 2022 Carbon 358 in the cabinet under tv. Do you have a recommendation on size and brand of a fireplace? | Manufacturers don't list out any dimensions for us so I would need to know how much space you have to...
2006 Mitsubishi Endeavor Trailer Hitch Compatibility with Other Model Years
Will a 2008 Mitsubishi endeavor receiver hitch fit on a 2006 ? | If you have the Curt # 13113 on your 2008 Mitsubishi Endeavor, it will be compatible with a 2006 model. This hitch will fit 2006-2011 model years of that vehicle. I've attached...
Brake Controller Option for Towing Camper with Several Different Vehicles
I need to tow the trailer with the electrical braking with several vehicles and od not want to install a control unit in each vehicle. Can I install the control in the trailer itself? It is a camping trailer with its own battery so I have...
Troubleshooting Brake Light Issue with Modulite Wiring # C59496 on a Mitsubishi Endeavour
I installed the C59496 wire harness kit for my 2010 Mitsubishi Endeavour. I then connected my camper trailer. The running lights and blinker work. However, the brake lights are always on...on the trailer. I disconnected reconnected everything...
Determining the Correct Weight Capacity Tires For a 2018 Keystone Carbon 364 5TH Wheel Toy Hauler
Hello, Im the proud new owner of a 2018 carbon 364. After hearing all the horror stories about tire blowouts, Im very concerned that we may not have the correct ones on our rig. Currently on are ST235/80R16 F. The GVWR is 17000, GAWR 7000....
Does Draw Curt 13313 Have Capacity for 3,200 lb Boat
Hi, Was wondering if this would be suitable to tow a boat and trailer weighing 3200 lbs? Also does it come with the wiring harness and instructions how to install? | The Curt trailer hitch part # 13313 has a 3,500 lb towing capacity so it could...
Parts Needed to Add 7-Way to 2004 Mitsubishi Endeavor With 4-Way
Hello, I have a 2004 Mitsubishi Endeavor, and im looing to haul a 2009 Rpod 174. I need to upgrade my current 4 way wiring hook up ro a 7 way hook up that can withstand the amount of voltage needed for the brake light system of the Rpod. Could...
Hitch and Wiring Install Instructions for a 2011 Mitsubishi Endeavor
do you have a video on connecting the trailer wiring kit on 2011 Mitsubishi Endeavor. | The recommended trailer wiring harness for your 2011 Mitsubishi Endeavor is the Curt Harness part # C56039. We have not had the chance to install this harness...
What are the Dimensions of 75101
Can you provide a diagram with dimensions for this hitch, bolt hole pattern, length, depth, etc? | The hitch is 37" wide and 21" deep. The mounting holes are 9.5",14.75" and 19" from the end of the receiver tube opening and 5" less than that...
Does Malone Roof Rack MPG216 Fit 2005 Mitsubishi Endeavor
Your add claims that Air Flow 215 fits the 2005 Mitsubishi Endeavor. I have tried cross bars said to fit the slot, and have looked at dimensions of others that are clamp fits. The cross bars in-slot mount fixture was 1/2 inch and my slot was...
Trailer Hitch Recommendation for 2007 Mitsubishi Endeavor
which hitch would i need for 2007 misubishi endeavor . | For your 2007 Mitsubishi Endeavor you would need the Curt hitch part # 13113 which is confirmed fit. I have attached an install video for the # 13113 hitch which will walk you through...
No Factory Mount on 2021 Keystone Carbon 358 For Furrion Vision S
2021 Keystone Carbon 358 no existing mount. I do not have the existing mount for the rear camera. Do I need to drill my own hole and wire into the rear running light? Kind of confused because the keystone website says Furrion wireless backup...
Recommended Furrion Trailer Backup Camera System for Pre-Wired Trailer
Looking for a backup camera. My trailer is pre-wired for a Furrion FOS48TA-BL or FRC12TA-BL Is there a new version or should I try to find one of these? | For your trailer I recommend the Furrion Vision S Wireless RV Backup Camera System w/...
Replacement Suspension Components For a 2015 Keystone Carbon 327 5TH Wheel Toy Hauler
I have a 2015 Keystone carbon 327 toy hauler that the hanger brackets have torn out on the rear axle. the repair shop said I should replace the equalizer also.they are equaflex trailair # 1455251. did not see them listed on your web site but...
Trailer Hitch and Wiring Recommendation for 2007 Mitsubishi Endeavor
Good afternoon, I am contacting you today because I am getting out if the military and moving back home. I drive a 2007 Mitusibushi Endeavor. I am Interested in a 2 in receiver, and the 4 pin flat trailer light hook up. With a Max tow weight...
Bolts Provided with Hitch Will Not Fit in Nuts Welded Into Vehicle Frame
Bolts seem to not fit.. Seems to be too big for the holes in my vehicle. Dont know if wrong size bolts were sent or what bt my question is what size bolts are required for a 2005 Mitsubishi Endeavor trailer hitch? | Your Curt # 13569 Class III...
Where is the Trailer Wiring Connection Point for a 2007 Mitsubishi Endeavor
I would like to know exactly where the electrical connection is made. I dont see any wires inside the area around the spare tire and there are very few wires with access undr the rear of the vehicle. | The connection point for the Curt Wiring...
Where Does the White Wire of the Curt Wiring Harness # C56039 Go on a 2011 Mitsubishi Endeavor
no directions to do what with white wire lug connector on factory plug side | The white wire you referenced actually needs to get run to a clean metal surface on the body of your 2011 Mitsubishi Endeavor with the included self tapping bolt through...
Replacing A European Style Entry Door Lock On A 2022 Keystone Carbon 358 5th Wheel Trailer
I am replacing my OEM European Style lock.with a BP 31. I need some directions on how to install the striker plate on my 2022 Carbon 358. | The Bauer Products European Style RV Entry Lock # BA58AR is designed to replace motorhome locks so the...
Looking For Replacement G349 Key
I have a 2016 carbon 22m toyhauler key has a 349 stamped on it . I think there’s a g stamped on it to . Will any 349 key work | Hello Richard. The "G" prefix on your key indicates you have a Global Link brand lock on your toy hauler. So, you...
Tire and Wheel Combination Size 205/65-10 with 4 on 4 Bolt Pattern
Im looking to replace the wheels and tires for my 1974 Apache Royal Trailer, but am not seeing the right item on your site. They are 20.5 x 8.0 x 10.0 which I see tranlates to 205/65-10, but the bolt pattern is 4x4 and the trailer has a dry...
Installing Hopkins Wireless Backup Camera HM50002 in 2005 Mitsubishi Endeavor
I have an 2005 mitsubishi endovor can I install this unit | The Hopkins Smart Hitch Backup Camera # HM50002 will plug in on any vehicle that has a 7-way trailer socket with a round U.S. Car plug-in connector at the rear. The photo I linked...
Lift Kit that Fits Tandem Axle Camper Trailer
is there a kit like this for double axel set up? | For your tandem axle camper trailer we have the lift kit part # RR23QX which is a confirmed fit. |
What Size Hole Is Needed For Installation Of Optronics Flush Mount 4 Inch Round Light # STL23R-24B
I would like to install these flush mount tail lights and need to know the diameter of the hole. Will a 4 hole saw provided the needed holes size or does it need to be slightly larger? My application was previously surface mount lights but I...
Filter Your Search
Contact and Help