Socket Size for Installing Curt Trailer Hitch 13113 in 2008 Mitsubishi Endeavor
What size torque wrench is needed for installation | The Curt Trailer Hitch Receiver # 13113 that fits your 2008 Mitsubishi Endeavor will require you to use a torque wrench with an 18mm socket. You will need to torque all M10 fasteners to 48...
Do I Need To Lower My Muffler To Install This Hitch?
I have a 2008 Mitsubishi Endeavor I want to put a hitch on it but my muffler is directly or almost directly blocking one of the hose for the hitch do I reroute my exhaust or do you make a hitch that goes around it what to do | Hello, We have...
Trailer Hitch and Wiring Recommendation for 2007 Mitsubishi Endeavor
Good afternoon, I am contacting you today because I am getting out if the military and moving back home. I drive a 2007 Mitusibushi Endeavor. I am Interested in a 2 in receiver, and the 4 pin flat trailer light hook up. With a Max tow weight...
Recommended Trailer Wiring Connector On 2004 Holiday Rambler Endeavor
I am not the original owner 2004 Holiday Rambler Endeavor - the wiring has been cut leaving the wiring cut with blunt ends = is there any way that I can get the correct wiring colors to install a 6 pole male connector. My trailers are all 4...
2006 Mitsubishi Endeavor Trailer Hitch Compatibility with Other Model Years
Will a 2008 Mitsubishi endeavor receiver hitch fit on a 2006 ? | If you have the Curt # 13113 on your 2008 Mitsubishi Endeavor, it will be compatible with a 2006 model. This hitch will fit 2006-2011 model years of that vehicle. I've attached...
Hitch and Wiring Install Instructions for a 2011 Mitsubishi Endeavor
do you have a video on connecting the trailer wiring kit on 2011 Mitsubishi Endeavor. | The recommended trailer wiring harness for your 2011 Mitsubishi Endeavor is the Curt Harness part # C56039. We have not had the chance to install this harness...
What is the Torque Rating When Installing 7 Inch Brake Assembly to Brake Mounting Flange
I wanted to know what I torque the nuts to when attaching the 23-48 part to the square flange on my trailer? In the video I dont see them using a torque wrench but Im sure there is a best practice for this when tightening them up. Thanks. |...
Will Curt Hitch Fit with 2011 Mitsubishi Endeavor LS
Im looking at a hitch for my 2011 Mittsubishi Endevor LS I think I need a Curt 13113 can you verify this for me. My muffler should have to be dropped to mount properly. | Yes, the Curt Trailer Hitch Receiver # 13113 is what you need for your...
Hitch Recommendation for a 2004 Mitsubishi Endeavor
So I want to buy the hitch for a 04 endeavor and Im curious about your return policy. Also since I intend to install the unit myself what options do you have as far as trouble shooting install problems or something else. | The Draw Tite Hitch...
Electric Brake install 2000 Coleman Sedona
I've confirmed my bearings are 44643 for inner and outer. Ive also got the 5 on 4-1/2. So I would like a list of parts for the Electric Brakes for the 2000lb Dexter Axle. Ill need the Hub/Drum. Could you include Wiring in this as well for a...
Boat Trailer Lights Not Working when Connected to a 2011 Mitsubishi Endeavor
Ordered the trailer wiring kit for my 2011 Mitsubishi Endeavor. Hooked it up and finally got to camp. Plugged it into my boat trailer. It doesnt work. Lights on trailer work plugged into my truck 3 weeks ago. What can I check or do I send it...
Trailer Hitch Recommendation for 2007 Mitsubishi Endeavor
which hitch would i need for 2007 misubishi endeavor . | For your 2007 Mitsubishi Endeavor you would need the Curt hitch part # 13113 which is confirmed fit. I have attached an install video for the # 13113 hitch which will walk you through...
Electric Brake install 2000 Coleman Sedona
I have a 2000 Coleman Sedona popup camper. Ive verified it has the Dexter 2000 lb axle. Ive also verified it has the backing plate with 4 holes on each side behind the tires so it will accept electric brakes. Currently it doesnt have any brakes...
Replacement Hardware Kit for Trailer Hitches
Hi I have a 2008 Mitsubishi endeavor installing hitch looked under it missing the bolts all of them I guess someone removed the hitch and never put bolts back in question do you sell the hardware kit for it | Yes, we offer the Replacement...
What Size are the Bolts for Curt Trailer Hitch, # 13113 for a 2006 Mitsubishi Endeavor
what size are the mounting blots for the mitsubishi endeavour? | The bolt sizes for the Curt Trailer Hitch, # 13113, can be found in the instructions. I have included a link to the installation instructions and a video install below. |
Can the Pro Series Solo Steel Cargo Carrier be Used on a 2010 Mitsubishi Endeavor with 2 Inch Hitch
Although this item is rated for 400 lbs, can I still use this product with my Class 2, 2 inch hitch on my Mitsubishi Endeavor as long as I keep my load under the 350 rated tongue weight? | As long as you keep the total weight of the carrier...
How to Test if Bargman Molded Trailer End 7-Way Will Have Same Connections
Hello, I am replacing a Bargman 7 way trailer end on my Rpod with a new Bargman 54006-010 Heavy-Duty Cold Weather Insulated 7-Way Molded Trailer End with 8 foot Cable. Is it likely that the color coding for the wiring will be the same since...
Is the Yakima SkyBox Rooftop Cargo Box # Y07336 Completely Waterproof
Is this box waterproof? | In the strictest sense of the word, "waterproof" would mean water absolutely cannot enter a product. In reality there will always be some circumstance where some moisture could enter a product like a cargo box, even...
Where Does the 4-Flat Connector from Wiring Harness # C56039 go on a 2010 Mitsubishi Endeavor
Maybe it will be evident after I open the car up, but is there a slot to fish the wires from inside the vehicle to the undercarriage? Documents only describe connection inside the car. | There may be an access point to fish the 4-flat connector...
Where is the Trailer Wiring Connection Point for a 2007 Mitsubishi Endeavor
I would like to know exactly where the electrical connection is made. I dont see any wires inside the area around the spare tire and there are very few wires with access undr the rear of the vehicle. | The connection point for the Curt Wiring...
Right Side Trailer Lights Not Working After Installing a Wiring Harness on 2011 Mitsubishi Endeavor
ordered 2011 Mitsubishi wiring harness from e-trailer for my suv. . also ordered trailer hitch which is working great, installation was a breeze for both. only one side left of my trailer lights are working. would poor grounding cause...
Does Malone Roof Rack MPG216 Fit 2005 Mitsubishi Endeavor
Your add claims that Air Flow 215 fits the 2005 Mitsubishi Endeavor. I have tried cross bars said to fit the slot, and have looked at dimensions of others that are clamp fits. The cross bars in-slot mount fixture was 1/2 inch and my slot was...
Recommended Hitch for a 2018 Fiat 124 Spider Abarth
I am considering purchasing item C11435 Fiat 124 trailer hitch. Can you please confirm whether this fits an Abarth 124 spider? | I checked with Curt and I can confirm that their Curt Hitch item # C11435 does fit the 2018 Fiat 124 Spider Abarth....
Brake Controller and 7-Way Recommendation for a 2004 Mitsubishi Endeavor
I emailed quite some time ago about which parts are needed to install a brake controller and 7-pin wiring harness on my 2004 Mitsubishi Endeavor Limited. The vehicle came with the towing package and am currently towing with my 4 pin that came...
Filter Your Search
Contact and Help