Universal Way to Install 7-Way and Brake Controller on Vehicle
I have a 2000 model W3500 truck, like the Isuzu NPR. I want to wire up two different trailers to it: both trailers are 7 pin rv plug. What will I need? | You will need to start with a 4-way (if you do not have one). For that you would want...
Do You Carry a Hitch that Will Fit a 2005 Dodge Neon SRT-4
I just bought a trailer hitch for my 2005 Dodge Neon SRT-4. It had the same part number as yours 24701 but it was a different brand hitch and it didnt look like the one on your site at all. It has a round tube that runs the entire length of...
Trailer Hitch Options For A 2019 Isuzu NPR With Rollback Flatbed
What hitch fits a 2019 Isuzu npr rollback bed? | Hi James, There isn't a custom-fit trailer hitch option available for your 2019 Isuzu NPR so you'll need to measure the distance between the inside of the frame rails and also the drop needed...
Hitch Cover For 1-1/4 Inch Class I Reese Hitch On 1996 Plymouth Neon
Need a plastic trailer hitch cover for a Reese hitch #79062 1996 Plymouth Neon installed 09/2001. Called the shadow. 2000 lb trailer/200lb tongue weight. | For your hitch cover on your 1996 Plymouth Neon, I recommend the etrailer.com Rubber...
Wiring a Brake Controller Into an Isuzu N-Series Truck
Im trying to find the cold side brake switch to wire in brake controller before I order one from you. | Finding the cold side of the brake switch can be a little difficult, but not overly so. First, you want to be using a voltmeter or a circuit...
Trailer Hitch Receiver Compatible With a 2014 Isuzu NPR
I am looking for a compatible trailer hitch for a 2014 Izuzu NPR. What do you suggest? | The Draw-Tite Universal with the 7" Tall Brackets # 41990-07 or 16" Tall Brackets # 41990-16 are some of the better options for your 2014 Isuzu NPR. The...
Availability of Replacement Wheel for Demco Kar Kaddy 3 Tow Dolly
According to Demco the correct wheel is: 6x14, 5 on 115mm 4.5in, 2-3/8 bore, 42mm offset. What do you have that will fit for a spare? | We can indeed offer you a spare wheel for your Demco Kar Kaddy 3. It is a chrome wheel rather than white....
Parts Needed to Install 7-Way and Brake Controller on 2002 Isuzu NPR
Hi. I’m want to wire my 2002 NPR diesel truck for towing a trailer with a 7 way plug. I also would like to add a brake controller. It did previously have a 7 way but the wiring was sketchy. I’d like to do a complete plug type setup. Thank...
MagnaFlow for a 2002 Dodge Neon
which magnaflow will fit a 2002 Neon sxt | The MagnaFlow Stainless Steel Cat-Back Exhaust System, # MF15801, is the custom fit item for your 2002 Dodge Neon if you have the L4 2.0L engine. Replacement exhaust system from the catalytic converter...
Parts Needed to Install a Trailer Brake Controller on a 2007 Isuzu NPR HD
I have a 2007 Isuzu NPR HD Diesel truck. I want to wire an electric brake controller for pulling my twin axle trailer. I have no clue where to look or what controller would be best. I have purchased other controllers for my 2005 Dodge ram...
Replacement Landing Gear Jack for Ram Follow 12k Jack on Trailer
Looking for a replacement 12k Ram Leg. Its the one without the crank arm. I can send pictures of our setup if needed. Thanks. | Send me the pictures you have and I'll see if it's something we can get. | See attached pictures | Thanks for the...
Can RoadMaster Tracker Towbar Be Used with a 2000 Dodge Neon
Will part # RM-020 work with a 2000 neon? | Yes the RoadMaster Tracker Tow Bar will work with a Neon, but you will need appropriate base plates on the Neon in order for the tracker tow bar to attach to it. The Tracker Towbar will fit any RoadMaster...
Suspension Enhancement that Fits 2015 Isuzu N Series Freezer Truck
I owned isuzu freezer truck which can take 3000 kg. But I wanted to to carry 5000 kg. by this truck. Presently it has 3 leaf springs rear and helper contains 2 leaf springs. Further in front it has coil springs. I intend to add 1 leaf to rear....
How Long is the TJPB-HD Replacement Handle?
What is the length from center to outer edge of ball? | The Replacement Topwind Black Knob Handle for Ram Jacks # TJPB-HD will measure right at 8 inches from the center of the clamp to the furthest most edge of the handle/knob. This will also...
Buyers Products Service Body Hitch Receiver Frame Height
Looking at adding this to an Isuzu NPR HD that has a welded on step bumper. Space is tight, so a bolt on unit at the bottom of the frame rail seems to make the most sense. How far shoes this down below the frame rails? I need enough to clear...
Recommended Trunk Mounted Bike Rack for 2003 Dodge Neon With OEM Spoiler
I am looking for a trunk mount bike carrier for my 2003 dodge neon srt4... I do have the factory rear spoiler.. Do to have something that will work with the spoiler being on the back?? Thanks | The Yakima HangOut # Y02637 states that it is a...
Which Edge Programmer for a 2003 Isuzu NPR-HD 4HEI Diesel RV Box Van Conversion
Is the Edge CTS2 or CS2 comparable with my vehicle? It has an OBD plugin but it may not be an OBD II. | All vehicles built after 1996 should have OBD II instead of the OBD ports, so your 2003 Isuzu N-Series will should almost certainly have...
Will the Edge Insight CTS2 Gauge Display EP84130 Work on a 2003 Dodge Neon SXT Manual
will this work with a 03 dodge neon sxt manual trans? | Yes, the Edge Insight CTS2 Comprehensive Gauge Display part # EP84130 will work on a 2003 Dodge Neon SXT with manual transmission. |
Parts Needed to Install a Brake Controller in a 1999 Isuzu NPR with 7-Way
I have a 7 way connection on my truck, what else is required to hook up a brake controller. Thanks in advance | Since you have a 7-Way you will only need a few more components to complete a brake controller install on your vehicle. First let's...
What Size Fasteners Should be Used to Install E-Track Inside of a Box Truck
For a box truck, with an aluminum box, what size rivets should be use to secure the e-track to the vertical aluminum structural members? Also, should the plywood on the box walls be removed so that the e track can be mounted directly to the...
Will Trailer Hitch Fit 2002 Isuzu NPR HD Box Truck
I need to add a hitch Are there any bolt on kits or only weld on? Which would you recommend for my vehicle since I also have a liftgate I assume I’ll need to use an extended draw bar to clear the depth of the liftgate I plan to tow an enclosed...
Recommended Vehicle Wiring Harness For a 2007 Isuzu NQR or 2011 Isuzu NPR
I NEED A TRAILOR HARNESS FOR 2 TRUCKS, 1 2007 ISUZU NQR 5.2 DIESEL AND 2 2011 ISUZU NPR DIESEL ALSO | For your 2007 Isuzu NQR and 2011 Isuzu NPR you will need either the Universal 4-Way # C59496 or Universal 7-Way # 22551 depending on the trailer...
Is There a Trailer Hitch Receiver Which Will Fit a 2018 Isuzu NPR With A Lift Gate?
Hello, Is there a trailer hitch receiver for an Isuzu NPR EFI that would work with either a Maxon TE-25L Tuk-A-Way lift gate or a Waltco WEM-AP25 lift gate? Thank you | In my experience a truck like your 2018 Isuzu NPR will either have a lift...
How To Install 4-Pole Hardwire Kit 18252
how do you hook it up so your trailer has brake lights with the 4 pole | The 18252 hardwire kit needs to be cut and spliced to your vehicle taillight assembly wires. I have included a link to a video of a hardwire install on a 2000 Dodge Neon....
Filter Your Search
Contact and Help