Result: Boat Loading Guide

The Caliber Bunk Wrap Kit for 2x6 Boat Trailer Guides item # CA88AJ fits two 2" x 6" bunk boards up to 8' long. | I own a pontoon boat. Each bunk has 2 - 2x6x16 boards. Does one kit cover both boards or do...

Hello Harold, Looks like you already found the longest ones we have, the CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair # CE27845. For some 10' boards, I would go to your local hardware store to get some 2"x4" Pressure-Treated Southern Yellow Pine, then you can add the Caliber Bunk Wrap Kit for 2x4 Boat Trailer Guides - 16' Long - Black # CA38AJ. |

Is the Caliber Bunk Wrap Kit for 2x6 Boat Trailer Guides - 16foot Long pre cut for two 8’ wraps or is it the full 16’ length? | Is the Caliber Bunk Wrap Kit for 2x6 Boat Trailer Guides - 16foot Long pre cut...

While we definitely have what you need, I am guessing there was maybe a misprint in regards to the tongue weight, which can't be a max of 3,500 lbs (tongue weight is generally 10%-15% of the trailer's maximum loaded weight). So I am guessing that the trailer's overall max loaded weight is 3,500 lbs, which makes a lot of sense because you mentioned your boat was 1,600 lbs. |

You've got a pretty heavy fiberglass boat, and that ShoreLand'r trailer uses all those bunks for a reason, to spread the load out across a lot of hull surface area. | I was thinking about putting rollers on...

Now you'll have way less friction when loading or unloading your boat :) | I’ve got four 6-foot bunks on my trailer. I saw that one set is 10 that are 3inch wide and 15inch long – or CA58AJ is smaller... how...

This helps avoid concentrating the load on a narrow strip. The 1-1/2" slides are better suited to smaller boats, pontoons, or PWCs. | My 25’ proline weighs 5000 lbs. will your caliber boat slides support this...

It's also 3 separate pieces so you're going to get quite a bit of movement to help with the loading process. What kind of boat do you have? | I normally have to lift my boat up and over my bow stop, but I...

This trailer has smaller 8 inch wheels so it is low to the ground so you can get your boat on the bunks when loading up. Like the Malone trailer, the CE Smith comes with a winch so you don't have to make a separate purchase. |

If you're looking for the smoothest loading possible, I'd extend the slides over as much of the contact area as practical, especially near the rear of the trailer where most of the loading friction occurs. ...

I want to move my kayak on trailer by hand, but getting older. kayak loaded weights 100lbs how much does trailer weigh. | I want to move my kayak on trailer by hand, but getting older. kayak loaded weights 100lbs how much...

A couple of “nice-to-have” items that a lot of people end up adding later are: etrailer Anti-Rattle Hitch Collar # e38FV etrailer Hitch Pin Alignment Collar # e98942 Those just help tighten everything up and make hookups a bit easier. What kind of boat are you going to be loading up on that trailer? |

The Caliber Bunk Wrap Endcaps part # CA48AJ are designed to fit standard 2x4 lumber, so they can be installed on the ends of your clothesline cross beams just like they would be on a boat trailer guide. I actually think that is a pretty clever use for them since they will give you a much smoother, more visible end to the boards and help eliminate those painful head bumps when mowing around the yard. |

Using a tow dolly instead of your current trailer jack will definitely help make moving your loaded boat trailer much easier. We do have options like the Rack'Em # RA20 which is a cost-effective solution but if you are already experiencing some back issues then this isn't a very viable option, plus it only has a weight capacity of 500 lbs. |

The boat and trailer weigh approximately 5000 pounds. | I would like to purchase and install front mounted hitch 65062 on my 2014 Ram 1500 Big Horn for use in moving a boat trailer into a garage up a very slight incline....

Once the wraps are on, you’re pretty much done with bunk maintenance since they don’t hold water or wear down like carpet, and they make loading and unloading a lot smoother. What kind of boat do you have?...

Hi Jeff, I’m glad you’re tackling those cracked slides now because that buckling at the ramp hinge is exactly what can catch carbides and make loading more stressful than it needs to be. With two sleds side by side, having solid, smooth guides makes a big difference. |

This dolly is chain driven so all you have to do is turn the crank and guide it with the steering handle. This dolly has dual wheels as well. | I am interested in swivel trailer jacks. I have a 5 by 8 foot enclosed cargo trailer...