Result: Boat Loading Guide

Can these guide posts be carefully bent to fit the angle of my boat sitting on the trailer? approximately 60 deg. | I would not recommend bending the brackets on the CE Smith Post-Style Guide-Ons # CE27637. These are really designed more as...

I have a Triton TRX 19 patriot bass boat loaded on a two axle ezloader trailer. What type of trailer guide would be best for floating boat onto trailer and for power loading boat onto trailer. Post type or bunk type trailer guides? | I really...

I have a Hewscraft 180 Sportsman, I am new to boating. I have an EZ Loader trailer with bunks. I am having trouble getting the boat to load centered, I am by myself. Is there something I can add to the trailer to help with this problem? | Hey...

The previous owner never had to use trailer as he had a boat lift. We took the boat out for the first time and it is next to impossible to get the boat just right so that it will set down perfect on just two carpet covered boat rails and this...

I have a LUND 18ft 10in Pro-Deep V boat that is difficult to load on the factory trailer that just has bottom bunks and 2 post type upright guides on the back. It is very difficult load in the wind since the boat is very heavy. I wonder if...

I have a pontoon boat that I have turbel putting on the tailor the current and wind keeps kicking the back away from the Trailor .What guide will be the best for me .Im looking at 60in high but I want something strong. Thanks | For a pontoon...

I am loading a boat in river current and it is pushing my boat over the guide ons. Is this sturdy enough to hold a john boat being pushed by the current? | I recommend using the CE Smith Roller-Style Guide-Ons # CE27610 for loading and unloading...

I am purchasing a 2008 19 foot Tracker Pro Team. The trailer does not have the bunk style guide ons. My experience loading a boat has been power loading so i definitely want the bunks. Your help on the length would be appreciated. | I wish I...

How far above the boat should the guide ons extend.? I have a Boston Whaler anniversary edition and am trying to determine the correct height . Thanks | When installing guide-ons on your boat trailer, like part # CE27636, you want to make sure...

I am looking for some underwater trailer lighting to help while loading and unloading boat something clear and bright? | The best way to help with loading your boat off and on the trailer at night would be with a set of lighted boat guide-ons...

I have a 16 ft Lund Tyee, and am looking at adding bunk guides for my trailer it has roller bunks for loading the boat. Im admittedly not the greatest at loading, so Im looking for added stability to keep me straight. Im wondering if the...

Hi. I would like to install side galvanized guides on my boat trailer. My boat is 26 and some 9 lbs. So, any guide needs to be heavy duty. All the guide products I see on your website are not heavy duty enough. Can you help with this...

what type of roller assures that the rear of the boat stays centered while loading the boat on the trailor? | Sounds like you are referring to guide on rollers like the CE Smith Roller-Style Guide-Ons for Boat Trailers # CE27610. These mount...

I have a 23 CS Cobalt, I have 36” trailer guides, the left side has recently been getting rub marks? This is on front section of boat. Just got new canvas guide covers to see if it helps. | With post style guide-on's like the CE Smith # CE27620...

I assume these would still work with a pontoon trailer instead of a boat trailer? We may be loading in a river more often than not, so with some sort of current along with wind, Id almost like to have something on the outside that sticks...

can i use the 60" bunk style side rails on our pontoon boat | A bunk-style boat trailer guide-on like the 60-inch CE Smith # CE27600 could be used on a pontoon boat trailer. These bunks serve to guide you when trailering the boat. They mount...

what is the best boat trailer self aligning system for a 20 foot cobalt boat going onto a tandem axle trailer | The CE Smith # CE27610 Guide-Ons work well on the back of the boat, but in quick moving water something that's actually self-adjusting...

Will the bunk guides work on a pontoon trailer? | A bunk-style boat trailer guide-on like the 60-inch CE Smith # CE27600 could be used on a pontoon boat trailer. These bunks serve to guide you when trailering the boat. They mount on the outside...

I have a 1994 Mariah 2350 with a Heritage trailer. I want to know if these are sturdy enough to help guide the boat while loading in a current or wind. I do not have more than an inch I can be off right or left to have it on the trailer improperly. Thanks...

I have a 21 foot open bow boat and would like to add trailer guides to help in loading the boat. What size guides would you recommend? | A 40 inch tall set of CE Smith boat trailer guide ons like part # CE27620 would work well. Your boat shouldn't...

How do you figure the distance that you leave between your boat and bunk I have a 16 ft aluminum boat wind and current are a bear. I need to get the two as close as possible for straight on loading. | For bunk style guide-ons such as # CE27600...

the trophy I have is a22 ft. and the trailer is an escort. the frame is to narrow and all the boat guides are to small to adjust out another 8 inches on each side what can I do. | I recommend the Ark Ezi-Guides Self-Aligning Boat Trailer Loading...

I have a 22 Ft Aqua Patio Tritoon with lifting strakes and an EZ load trailer. Which guide ons would work best for this? | Pontoon boats normally use guide-ons that mount in the center of the trailer, and even with the three pontoons on your...

I would be using these guide on’s in a river current, sometimes strong. Will the guide on’s be strong enough for this application . Illinois and Mississippi rivers, a 20 ft pontoon | As you will be loading and unloading in the stronger river...