Result: Boat Loading Guide

If you are having trouble loading your boat in low light conditions we offer something similar to what you are describing with the CE Smith Post-Style Guide-Ons with LED lights # CE27740. ...

The heavy-duty brackets attach to the guide-ons and extend the lights 7-1/2 inches from the posts. | Can I install my rear tail lights and license on this model ? | We do offer brackets to mount lights on the 40 inch CE Smith...

The light will be submerged when launching and loading my boat. Ive considered the BUL10CB, but Im thinking the BUL78C3MB might be easier to mount. | Im looking for a Backup Light for my Boat Trailer. I...

Would it be possible to attached these near the top of my PVC guide posts I use on my boat trailer ? Does anyone do this ? | Would it be possible to attached these near the top of my PVC guide posts I use on...

It'd make your jet ski easier to load in low light situations, as well as making your trailer more visible when towing at night. | Just got a new jet ski and trailer. Looking for Looking for vertical posts to attach to both...

For the post style lighting you desire, I recommend the CE Smith Post-Style Guide-Ons with LED Lights for Boat Trailers # CE27740. | is it possible to use JE00600 as travel guides on either side of kayak...

Width 89-1/2". Guide posts 2" schedule 40 PVC and tapers out almost 2.5 inches though. | Want LED rectangular tail lights, 2 amber side LED markers and LED marker light to mount on top of each guidepost of our rescue boat trailer. Trailer...

How would this light work for backing down a dark boat ramp to load a boat during the night? is item #BUL78CB brighter than item # BUL90CB? | How would this light work for backing down a dark...

Will the subject trailer lights work on the CE SMITH LIGHT MOUNTING BRACKETS FOR POST STYLE BOAT TRAILER GUIDE ONS WHICH I PREVIOUSLY PURCHASED FROM E TRAILER? | Will the subject trailer lights work on the CE...

You certainly could use the Optronics Load Resistor for LED Lights # ALEDRST1B on a boat trailer, but since electricity and water don't mix well we recommend unplugging the trailer connector before backing the trailer into the water. |

I have a round 7 pin coming from the Tohoe then a connector that takes a 5 pin coming off of the boat trailer. Do you have a diagram to show how to wire the 2 6 back up light I will install on the back of the trailer for backing the boat in...

2008 BMW X5. My boat trailer was rewired with LED lights. I now have a hyperflash issue. | 2008 BMW X5. My boat trailer was rewired with LED lights. I now have a hyperflash issue. I believe the answer is to install one...

I need to replace the rear tail lights of a 2008 Bass tracker trailer for a 175TXW. Do you have a plug-in play LED option? Thank you. | Hey John, If you have a 2-wire # A46P36B or 3-wire # 421-491 style connector then we might have a plug...

Im having a hard time backing my boat down the boat launch at night time. Its completely dark so Im looking into putting back up lights on my boat trailer. | Im having a hard time backing my...

Will be under water every time I unload and load boat. Anything else you would recommend if its not? | Looking to put a light on boat trailer license plate. Is this light submersible? Will be under water every...

You want the Keel Roller to be as close to the stern of the boat as possible to help center the boat while loading. | Sorry I do not have pictures boat and trailer out for replacement bunkers....

Will this help with my ‘05 F250 w/a 6” lift, that’s typically loaded with tools and pulling a 24’ boat w/ a large motor sway and sag are my main issues? | Will this help with my ‘05 F250 w/a 6” lift, that’s...

The RAS gives up to 2000-lbs of load support so it will be ideal for your combination of camper weight and trailer tongue weight. | I have a 2018 Nissan Titan and I plan on purchasing this product but I need to know if it...

Hello, i have an EZ Load boat trailer and checked to see how many wires are coming out and there are 2. | Hello, i have an EZ Load boat trailer and checked to see how many wires are coming out and there are...

Converting trailer lights from incandescent bulbs to LED does not require the use of a load resistor. For example, the part # STL8RB would fit and work well without any type of load resistor. | I would like...

If the STL64RB is installed on a boat trailer in a vertical orientation where it will be submerged during loading and unloading, will there be a problem with water being retained in the case and later freezing?...

Hi...I need your assistance re lights on a boat trailer that we recently purchased....Its for our 16foot aluminum fishing skiff. | Hi...I need your assistance re lights on a boat trailer that we recently purchased....Its for...

For your 2019 Ford F-150 Raptor towing a 6000lb boat I recommend using the RoadActive Suspension Leaf Spring Enhancement Kit # RAS3611 you purchased as it will be the best at preventing sag like you are experiencing, but will also eliminate axle wrap and minimize sway and body roll giving you a better driving experience loaded or unloaded. |

I put a slide in pop up camper in the bed that weighs 1100lbs and tow a smaller boat with about 100lbs of tongue weight. The camper is fairly easy to load and unload so I keep it unloaded when not using. ...