Result: parallel kit

Hey Lindsay, there is only one available option that would allow you to use the 135 cm Thule Wingbars part # TH711400 on your 2023 Ford Ranger and that is with the Evo Feet part # TH710501 and the fit kit part # TH145063. The Rapid feet which were a previous generation would be compatible with the Wingbars since the mounting has remained the same but there was never a fit kit designed to fit your truck from that generation of Thule feet since it wasn't out at the time. |

So the step you referenced is the Lippert Kwikee 28 Series part # LC3747451 so if this is what you had and it was the current generation you'd want the part # LC379769 as a replacement motor kit. | HOW TO DETERMINE...

Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-15247. | Does this fit 4 x 4 Ford Ranger 2021 model. Got mine today but the booklet says 2 WD ONLY.Hope it works on either or...

So, unfortunately, the kit you have will not fit on your 2001. For your newer truck the Roadmaster kits we have are part # 483-1 for the XL and XLT or part # 477-1 for the Edge. | I previously purchased base...

I have two pieces of the clamp kit but can’t find any information on them. I am in Canada. | I have a older Pace Edwards cover that came with a truck I just bought but need the clamp kit. I think it’s the jackrabbit and it was...

I order this kit today and would there be any way I could get a copy of the instructions emailed ahead of time? | I order this kit today and would there be any way I could get a copy of the instructions emailed ahead of time?...

Yes, your older Blue Ox Aventa tow bar is compatible with newer base plate kits like the # BX1126 that you referenced. | I have an older very good condition Blue ox Aventa model BX7335 tow bar Id like to use with newer base...

The video also uses our installation kit, part # ETBC7, which you'll need if your Ranger doesn't have a 7-way connector. | Installation video for 2004 ranger | We do have a video of a brake controller being installed in a...

For that you would need the part # 119250KIT. We only have install videos on cars, but they will give you the general install process. | 2014 Sprinter 2500 I need to wire Trailer Lights and Add a brake controller...

If the vehicle does not have a factory sway bar then you will also need mounting kit # RM-590064-00. The differences in bar diameter are slight but in general the thicker the bar the more effective it will...

need to know which hitch is the best to order for a 144inch sprinter with a step bumper - also need 7 way wiring kit also need to order one for a 144 sprinter without a step bumper - what do you recommend | need to know which...

I really like the diode wiring kit because it is designed to prevent any type of electrical feedback, keeping your Ranger's electrical system safe. | Will the Roadmaster direct connect base plate #RM-524459-5 work with my truck?...

Behind underneath is the generator. I can send pictures if needed. Anyway we want to add a hitch and get the whole kit with wiring, receiver ball etc. | This van is 22 ft long with 158 wheel base. It has...

GVWR/2,381 UVW/1,656 does not have generator. CCC/611 lbs. manual calls for class 2. Will your E-S3 work or do I need part 13138?? | I have 2007 3.0 ford ranger it’s not a 4x4. I’m towing a Rockwood freedom pop up camper...

Ford USA offers the Redarc Tow-Pro Elite # RED44FR with their own wiring kit included so it's confirmed that this controller is compatible with the 2020 Ford Ranger. | I have a 2020 ford ranger xl without factory tow package....