Honda  x   >   Pilot  x   >   !Dexter  x   >   !UWS  x   >  

I will be using a 2012 Honda Pilot EXL to tow a Meadow Creek BBQ smoker trailer model TS250 w/ a BBQ42. Trailer wheel size is 15. My question is what would be the required drop needed if any to be as level as possible. | In order to determine...

So i bought the wire harness in 2016 and has worked great without any issues. It has all of a sudden stopped working. The fuses didn’t look bad but replaced them anyways and it still didn’t work. Bought a tester to plug in and any on getting...

Wanting to tow my 2018 Honda Pilot Touring model on a tow dolly behind my motorhome. What do i need to be able to plug into to make the Pilot’s running, brake and turn signals work, in addition to the lights on the tow dolly. | You'd need...

What Weight Distribution hitch should I use on a 3k to 3.5 k trailer with tongue of 225 to 450 pounds | For your tongue weight range of 225 to 450 lbs the Reese weight distribution system part # RP66082 would be a really great option as it has...

Hi, I want to buy the Honda Pilot 2012 7 pin plug with wire connector to factory plug in. I already have the flat style trailer wire installed. So I don’t need the whole kit. All I need is the plug and play end, that the trailer will use. ...

Hi, The Yakima Exo System is a great concept, but is there a way to lock the accessories onto the swingbase to prevent theft? | Yes, there is a way to secure the accessories to the Yakima EXO Swing Away Cargo Carrier item # Y72VR. The Swing...

I notice you gave the specs for css-1125 2.5inch thick, and 6inch overall diameter. Considering the height and overall diameter of it, i dont see how it will fit my 2006 pilot. Since my springs in diameter is almost 9, therefore the css-1125...

Will the installation of the Curt Hitch part # C13146 on my 2016 Pilot accommodate a full-size spare? If you are not certain, how would I check? | I spoke with my contact at Curt and found out that trailer hitch # C13146 will fit with a full-size...

We have a 2022 Honda Pilot it did not come with a hitch or trailer working so what wire harness do I need to add trailer wiring | To add a wiring harness to your 2022 Honda Pilot you are going to want the Tekonsha T-One Vehicle Wiring Harness...

Is it possible for you guys to basically build me a flat tow set up for my 2014 Honda Pilot? I will be flat towing it with a 2017 Thor 31FE Class C. I am looking for the best set up, BUT I also am sort of cheap, so the cheaper the set up the...

Do you have a hitch that well fit a 2017 honda Pilot ex-l with a full size spare tire? Thanks, | For your 2017 Honda Pilot, I recommend the etrailer Trailer Hitch Receiver # e98840. This Class III hitch is confirmed to fit your vehicle and will...

I have a 2011 Honda Pilot that came with the from the factory but no trailer light hook up. Which trailer light kit would i need to purchase to fit this application as the 2 options for with tow package or without tow package are dramatically...

I have a 2016 Honda Pilot silver with no roof rails naked roof. What would be my best choice of a ski rack system that would hold up to six pair of skis that would not leave scratching or marks. Also black would work but silver would my preferred...

My rack came with a fitting sheet that lists only the Honda Pilot 3rd Gen, 2016- model. Do I use these dimensions for my 2019 Pilot? | Yes the Rhino Rack ROC25 roof rack part # RR73XR is a confirmed fit for your 2019 Honda Pilot. As of right...

I received the Derale Series 8000 Plate-fin Trans Cooler Kit, and we just wondering if it matters which direction the fluid is going through the cooler. For example, are the top and bottom ports on the cooler itself interchangeable, or should...

Would like to by a trailer hitch receiver kit to install on my 2007 Honda Pilot - was wondering which product is recommended - Curt, Hidden, etc? Are they fairly easy to install if someone is good with tools? | The hitch I recommend for your...

Hi, I have a 2011 Honda pilot with factory crossbars. I was wondering if the Yakima Boa Roof Mounted Bike Carrier - Fork Mount will fit those crossbars? | There are many options in roof bike racks that will fit the flat elliptical factory bars...

Does this a-frame jack or any others have any option of using a cordless drill with the proper attachment to raise and lower it? I use this to raise my pop-up camper and lower the stabilizers so would be nice to use it for this also. | Like...