GMC  x   >   !Ford  x   >   !Pacific Coachworks  x   >   Yamaha  x   >  

Item # SW1125220 I was looking at this part number for a winch for my atv. One picture shows a mounting bracket and was wondering if that bracket would work with my 2016 Yamaha Grizzly 700 EPS . Thank you | There is a specific winch mount...

I have a 2002 bear single axel trailer with a 3500 lbs capacity. Is there any chance you can help me figure out what leaf spring I need? I can supply the vin if needed. | What you'll need to do is measure your current springs without the weight...

I have a class I hitch - 1 11/4inch How can this cover fit both 1 1/4inch and 2 | Both San Fransisco Giants hitch covers we carry, parts # HCC2124 and # OHCC2124, are designed to fit 2 inch trailer hitch receivers only. |

Do you make Tonneau covers for a Yamaha Umax? | I have a possible solution for you, however, we do not carry tonneau bed covers for your Yamaha Umax Golfcart / UTV. If you just wanted the cover for looks or to keep the cargo inside the bed,...

I got a grizzly yahama 2018 700 Eps wanting to make sure this Bulldog WInch Custom-Fit Steel ATV Winch Mount Item # BDW15185 will mount perfect. Wanting to mount Superwinch 1135220 Terra 35 3500lbs to that Bulldog WInch Custom-Fit Steel ATV...

I have a lt2000 superwinch I am installing on my 2000 Yamaha Wolverine 350. It is already mounted but I am havibng trouble with what color wire in the 4 wire ignition switch to hook the red wire from the winch control into one that is only...

Hi, 2 questions: Does the SW1135220 come with a mounting bracket that would fit a Yamaha Kodiak 700? If not, do you sell a fully compatible mounting bracket i.e.: - no modifications needed? What is the part # ? | I do have a winch mounting bracket...

Electric trailer jack. Hooked trailer up to truck,extended jack all the way up. Now it won’t lower and motor just clicks. Manual says clutch might be engaged? | Did you extend it to the point where the jack stopped moving but the motor was still...

I am looking for a Scissor Step that mounts from underneath the camper not on the wall the door is on. How do you mount your Aluminum Scissor Steps, 24 Wide, 31-39 Tall Code: AS24? The only place I have available to me to mount any type of...

I would like to purchase a winch and everything I need to mount it to my ATV. I have a 2006 Yamaha Wolverine 450. I was looking at part # sw1130220. | For your 2006 Yamaha Wolverine 450 we have the custom mount # BDW15140 which mounts directly...

Hi,have a new aluma tilt two place snowmobile trailer,has 12” trail express tires max load on each tire 1200lbs at 65psi. Trailer was used for 6 months probably used once a weekend for 300 km each time. Has 2200 lb axle,two snowmobiles weigh...

Good Morning what is the correct part number for a replacement winch wire rope for a Super Winch LT-2000? is there a Synthetic Rope available for this model? Thanks, | The Superwinch LT2000 winch has a 50 foot long wire rope with a 5/32 inch...

I have a 2007 Yamaha wolverine 450 4x4. I am looking for a trailer hitch bolt on kit. And a winch mount. | We do have a winch mount for your 2007 Yamaha Wolverine 450 4x4. It is # BDW15140. We do not have a hitch mount for your Wolverine though. |

Will this work with the superwinch terra 45? | Yes, the Superwinch Custom-Fit ATV Winch Mounting Kit # SW2202920 will work perfectly with the Superwinch Terra 45. I verified this through Superwinch's fit information. I have attached the written...

Can you tell me what is the diameter of the inner hole of the cup? I see in the video the outer diameter of the cup itself is 1-1/2inch | Hey Toni, the inner diameter of the Replacement Mounting Cups # JIF58FR that you referenced is 1-1/2 inches...

Does this winch mount fit on a 2006 yamaha wolverine 450 4x4 | I spoke with my contact and they said the Bulldog Custom-Fit ATV Winch Mounting Kit, part # BDW15140, will fit the 2006 Yamaha Wolverine 450 4x4. It will also fit the 2006 to 2009...

Will the Terra 25 and/or 35 fit the above grizzly. I see some people have had trouble because there isnt enough space. If it does fit, what mount is required | For your 2014 Yamaha Grizzly 450 the correct Superwinch mounting plate is part #...

Will this fit this ATV properly? Blogs have complained about fitting and quality of hardware. I have a superwinch ATV2000 on a 2002 Suzuki KQ300, no problems in 12 years, easy installation too. easy clean fit on 2013 Yamaha 550EPS ??? | The...

Can you tell me what outside diameter is of the black cable. I need to buy a rubber grommet to ensure the lack of wearing to cable. | I went to our warehouse to get the Hopkins trailer wire connector # H20046 to provide you the measurement you...

I need a replacement range hood motor 1.5a ccw 120 volt | For the PH100CFM the correct replacement motor is the part # BVD0278-00 that you referenced. |

What is the length and gauge of the red power wire that is included? thanks, | The red power cable of the # DL25721 that you referenced is 25 feet long and has an 8 gauge thickness. |

So I did all my measurements on my trailer to use these to replace current stock ones. One question I have does it lower or raise the height of the trailer at all? The reason I ask is because my stock measurements are 6 1/4 between mounting...

I was at the boat launch yesterday, and noticed one tire off the ground. I thought something happened to the equalizer, but after inspection it appears to be fine. There was some wood in the launch ramp I didn’t see because it was dark, and...

Is one of these kits really strong enough to secure an ATV to my trailer? I tow on rough back roads. | The 679-lb wet weight of your 2016 Yamaha Grizzly 450 ATV is well within the 1500-lb weight capacity for the Erickson ATV E-Track Tie-Down...