Ford  x   >   Explorer  x   >   2010  x   >   2020  x   >   Pilot Automotive  x   >   etrailer  x   >  

Im a Ford dealer, I have a customer with a 2020 Ford Explorer XLT that had us install a hitch. He had us install a 4 pin harness along with the hitch, now he wants us to install a brake controller for a 7 pin. Vehicle does not have tow package...

I need to get the running light and the brake lights full bright when brakes applied to operate normally. The vehicle sees the current draw and thinks it has a trailor installed. It turns off the reverse radar sensors and other safety features...

Hi - I have a 2010 Ford Explorer 4.6 v8, with Sway Control option. GVWR: 6280 GCWR: 12000 Curb: 4628 Payload: 1652 I am towing a 2015 Aspen Trail Mini1500BH trailer. GVWR: 3800 Dry: 2975 Cargo: 825 Hitch: 357 Trying to determine the expected...

Hi, What harness do I use for my 2020 Ford Explorer to install a 7 pin connector? The truck comes with a quick connect As it is equipped to tow. | For your 2020 Ford Explorer with the towing package I recommend using the Curt T-Connector Vehicle...

I am currently getting new 2020 Ford Explorer XLT its being delivered right now and I am looking for a hitch. I saw the video for placing the hitch on 2019 Ford Explorer and no trimming of any cover was required, however for 2020 model, I read...

Hello. I have a 2020 ford explorer with side rails and want cross bars. Watched the video on your site and you recommended inno. I cannot find them on your website. Can u send me a link | Hey Angelina, For a 2020 Ford Explorer with raised...

My 2020 Ford Explorer has a tow package but I cant find a connector on the vehicle to hook up my brake controller to. Do you know where it is located? | If your 2020 Explorer is equipped with the factory 7-way trailer connector, it will be...

This may have been answered, but my 2020 Explorer detects the hitch cover as a trailer when plugged in. Cross traffic notifications are turned off as a result. Is there something that can fix this? | You could unplug the wiring connector of...

We need a 8 inch drop to pull a utility trailer. Can we use an adaptor without decreasing tongue weight we can tow? | I have a couple of different options for you to use with your 2010 Ford Explorer that will give you the 8 inch drop that...

Looking for a hitch for my 2020 Ford Explorer 4cyl. Is there any hitch where I don’t have to cut the rear bumper plastic? Thanks | All the hitches available for the 2020 Ford Explorer would require trimming the fascia in similar fashion. Of...

will kayak carrier work on my explorer cross bars | I would go with the etrailer Kayak Roof Rack w/ Tie-Downs - J-Style - Folding - Clamp On # e98878. As long as your crossbars are no wider than 3-1/8" and no taller than 1-1/2" then this will...

Im looking for hitch for my ford explorer with all wires included. | For your 2020 Ford Explorer I recommend the etrailer Trailer Hitch Receiver # e29YR. This Class III receiver is capable of 600lbs tongue weight and 6,000lbs towing. For the...

Could you tell me if this will also work on 2020-2021 Ford police Utility Interceptor please. | The Curt # C56306 fits the 2011-2019 Ford Explorer. Since you have the 2020 or 2021 model this will not fit. There are no plug and play options for...

2020 Ford Explorer LTD Version 2 WHL Drive will this hitch fit this vehicle? | The etrailer hitch part # e29YR that you referenced does fit your 2020 Ford Explorer LTD 2WD as it fits all models of the 2020 Explorers. If you also need trailer...

On 2010 Expedition EL, w/ existing 4 pin plug, will this kit be a one/one replacement? or does other wiring have to be done. HD tow pkg is NOT installed. Thanks. | The 2010 Ford Expedition should have a round connector at the rear of the vehicle...

Hello. I have an unwired hitch on my Explorer right now and am looking to install both a 4 way and a 7 way connector. From other posts, I was going to go with the following parts: 1 T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...

2020 Ford Explorer. Need to add 7 pin and I don't have the factory tow package. | We have exactly what you need to add a fully-functional 7-Way to your 2020 Ford Explorer! You need to start off with the T-One # 118599 which tees in behind your...

I have a 2020 Ford Explorer Limited with 2 Hitch Receiver and set up for trailer brakes. My Explorer has a receiver height of 20 to the top. My Trailer has a 28.5 measurement to the bottom of the trailer coupler. I am looking at your PH67SR...

2020 Explorer XLT no factory wireing. I need a controler, t style harness for lights and round style receptile. It is my understanding that XLT has absoluty no trailer wireing front or rear, is that sound correct? Thanks | If your 2020 Ford...

hello, looking for a Drawtite bolt kit # 75437F. Do you sell these ? | To order replacement hardware for the Draw Tite hitch part # 75437 what you need is the part # RHK. On the product page of this part number you'll enter the part # 75437...

Is there a recommended Swivel Marine Jack w/ Wheel for use with a CE Smith 48870 trailer? | The Round Swivel Marine Jack w/ Wheel # MJ-1206B works really well on the CE Smith trailer # CE48870 that you mentioned. It's a bolt on install too which...

Do you know anybody in SW Florida that can install this hitch? | The etrailer Trailer Hitch Receiver part # e29YR is indeed a confirmed fit for a 2020 Ford Explorer. If you will be having the hitch installed for you then you can expect to pay...

I own a 2020 Ford Explorer just installed a tow hitch but a t-connector won’t work because it doesn’t have the tow package. What are my options without cutting into the harness? Thanks for your help | The T-Connector for the 2020 Ford Explorer...

With #31545 Curt front mount trailer hitch receiver will I have to trim any bumper parts on my 2010 explorer xlt ? Thanks | There is no drilling, cutting or modifying of any of the parts on your 2010 Ford Explorer XLT for installation of the...