What Wires of 4-Way to 7-Way Adapter Needs to be Connected to Use Curt Echo Mobile
My RV has a 4 post to 7 post adapter the blue black and yellow are not connected to anything will the Curt echo Bluetooth brake controller still work for me ? | You'll need to connect the black wire of your 4-way to 7-way adapter to the positive...
Is Trimming Required for Installation of the # 31545 Front Mount Hitch on a 2010 Ford Explorer XLT
With #31545 Curt front mount trailer hitch receiver will I have to trim any bumper parts on my 2010 explorer xlt ? Thanks | There is no drilling, cutting or modifying of any of the parts on your 2010 Ford Explorer XLT for installation of the...
Noise-Reducing Wind Fairing For Thule Square Bar Roof Rack on 2010 Ford Explorer
I have a Thule 450 rack with square cross bars on my 2010 Ford Explorer. I’d like to get a wind fairing to cut down on the noise from the rack. Do you know what size or kit would work? Thanks | On your 2010 Ford Explorer Thule specifies 50-inch...
Replacement Drop Leg Needed for a RAM 2000 Series A-Frame Jack
I just purchased a camper, and the dealer did not have a footplate that would fit because of the indent on the stand itself. Can you tell me if it will fit this particular jack? It seems to have the same indent, Im just not sure if it will...
Where Is Factory Brake Controller Plug Located On 2010 Ford Explorer Sport Trac
Where do I find the wiring to connect my control unit to? I have a factory installed type III/IV towing package on my truck. Will it be located under the dash? How do I recognize it....special color or configuration? 2010 ford explorer...
Best Towing Mirror for a 2010 Ford Explorer XLT
What mirror is the best fix for a 2010 Ford explorer xlt | I would be happy to find some towing mirrors that clip onto your factory mirrors but if you are trying to replace your stock mirrors we do not offer any for your 2010 Ford Explorer XLT....
Why Must the Curt Class II Drawbar # C45014 be Used in the Rise Position Only
Why must the ball mount, #C45014, be used only in the rise position and not in the drop position? | I spoke with my contact at Curt and he said the Class II Drawbar, # C45014, has not been tested for use in the drop position. They only test...
Replacement Installation Kit for Aries Grille Guard AA3059 for Ford Explorer
Is this kit compatible with Aries Grille Guard model 3059 black or 3059-2 polished? | The Aries Grille Guard # AA3059 does fit your 2010 Ford Explorer and the appropriate Replacement Bracket and Hardware Kit is part # AABRKT-3059. Aries Replacement...
Will Trimax Trailer Wheel Chock and Lock TMX75FR Fit 205/75-15 Tire
In the video he mentions a tire size of 205 75r 15 , but that size is not listed , so will this work on 205 75r 15 ?? | Hey there Robert, thanks for the question and even though it is not listed, a 205/75-15 tire is absolutely compatible with...
No Power To Brake Controller With Plug-In Harness On a 2010 Ford Explorer
Hi, I want to install my tekonsha prodigy brake controller to my ford explorer. I have the correct wire harness that attaches the controller to the ford factory harness, however, there is no power. Thank you for your help. | The fuse for the...
Recommended Weight Distribution Hitch Compatible with 2010 Ford Explorer w/ Electronic Sway Control
Hi - I have a 2010 Ford Explorer 4.6 v8, with Sway Control option. GVWR: 6280 GCWR: 12000 Curb: 4628 Payload: 1652 I am towing a 2015 Aspen Trail Mini1500BH trailer. GVWR: 3800 Dry: 2975 Cargo: 825 Hitch: 357 Trying to determine the expected...
Roof Rack Confirmed to Fit a 2010 Ford Explorer with Raised Factory Side Rails
I currently have aero blades 7501b but I do not think they are correct, they do not even come close to the roof edge. Which racks will work for me please? The configuration page isn’t helping. I can take the factory rails off if necessary. |...
Installation of Brake Controller # 5504 Looking for Cold Brake Switch Wire on 2010 Ford Explorer
Trying to find the cold wire for brake switch on 2010 ford explorer. Had to hard wire brake controller | For a 2010 Ford Explorer the cold brake light switch wire should be a purple and white wire. You will want to test it to make sure with...
Flat Towing With 2010 Ford E450
I am trying to locate a hitch to use on a 2010 E450 Class C chassis. I need to have minimum 7K pulling for a 4 down situation near zero tongue wt. What is available? Thanks. | I am going to need a bit more information in order to make...
Which Roof Mount Ski Racks Fit a 2010 Ford Explorer Factory Roof Rack and Can Hold Fishing Poles
Which Roof Mount Ski and Snowboard Racks Fit a 2010 Ford Explorer with Factory Crossbars, and can they be used to transport fishing rods? | There are several ski/snowboard carriers that will fit the factory roof rack on your 2010 Ford Explorer. From...
Does the Hollywood Racks Sport Rider SE Tilt Downward for Easy Loading
We are considering the Hollywood Sport Rider SE for transporting a RadWagon electric cargo bike. Because my wife has trouble lifting heavy weights is it possible to tilt this unit down to reduce the height for loading and then tilt and lock...
Fit of Curt 20x48 Cargo Carrier # C18145 on 2010 Ford Explorer
Will this hitch carrier #c18145 work well on a 2010 Ford Explorer? | To determine if the Curt 20x48 Cargo Carrier will work with your Explorer, you will need determine if there is enough clearance at the rear of the vehicle. You will need to...
Thule Wingbag Evo Roof Rack that Fits 2010 Ford Explorer and 2013 Subarou XV Crosstrek
I have a 2010 Ford Explorer and a 2013 Subaru XV Crosstrek both have factory installed roof rails, I and am interested in the Thule Wingbar EVO roof rack with the clamp on feet to mount a Thule Dock Grip kayak rack. Are the Wingbar EVO kits...
Ladder Needed That is 105" Long
My ladder now is about 105 inches long, do have any that long for a George of 2000. | The longest ladder that we have is the 99-1/2" ladder from Stromberg Carlson. This comes in Silver # LA-401 as well as Black # LA-401BA and has a customizable...
CIPA Towing Mirrors That Fit a 2010 Ford Explorer
Do you sell a CIPA towing mirror that will fit a 2010 Ford Explorer? | We do carry CIPA towing mirrors that will fit a 2010 Ford Explorer. There are three different mount styles available - clamp-on, clip-on, and door mount. The clamp-on style...
Oil Cooler Recommendations for a 2013 Ford Explorer with a 3.5 Liter
Which oil coolers will fit on a 2013 Ford Explorer with a 3.5 liter engine? | I did some checking and it looks like the oil filter threads on your 2013 Ford Explorer with a 3.5 liter engine are M22x1.5 mm, so you are going to need an oil cooler...
Troubleshooting Wiring on 2010 Ford Explorer
2010 Ford Explorer Eddie Bauer Edition Factory Tow Circuit Problem - The trailer connector on the back of the vehicle has a 7 pin and 4 pin connector. Both connector outputs work except for the Right Turn/Brake output. That tells me its not...
Water Heater Replacement for 6 Gallon Atwood RV
We have a GCH 6 Atwood. We would like to replace it with the same features. Ours has a heat exchanger on the back. Could you tell us the part number? 6 gallon, DSI, propane and 120v. | The Dometic RV Water Heater part # DMC74FR would be...
Replacement 7-Way Wiring Harness for a 2010 Expedition EL with Existing 4 Pin Plug
On 2010 Expedition EL, w/ existing 4 pin plug, will this kit be a one/one replacement? or does other wiring have to be done. HD tow pkg is NOT installed. Thanks. | The 2010 Ford Expedition should have a round connector at the rear of the vehicle...
Filter Your Search
Contact and Help