Ford  x   >   Escape  x   >   Fastway  x   >   LubriMatic  x   >  

Anderson wdh for casita | We don't carry the Andersen weight distribution systems. If you can get me the tongue weight of your Casita though I can recommend you one of the brands we do carry. | We don't carry the Andersen weight distribution...

Hello. I have a 03 Ford escape that Im trying to figure out which light harness kit will work best. | The trailer wiring harness I recommend for your 2003 Ford Escape is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118343...

Our 2018 Escape does not have the tow package. No hitch no wiring. We want to pull our small teardrop so we need a complete towing setup. Trailer does not have brakes - its really cute and tiny and less than 1000-lbs! | Even though your teardrop...

Morning: have broken off the plug mount cover spring loaded cover and would like to get a replacement if possible. I dont see anything I can use. I had been using a cable tie to hold on the power cord. Thank you. It has the 6 post and its attached...

Part number 118251 towing harness for ford escape 2012 In the video a mounting bracket is mentioned. I do have the mounting bracket in place from the original flat four connection, does this new harness fit into that bracket? If not, what part...

Hi, looking to purchase a wiring kit for a 2012 Ford Escape that did not come with a tow package. Can you please identify the proper kit i would need. Thanks in advance. | We have the exact trailer wiring harness you need for your 2012 Ford...

Do I need a weight distribution hitch/sway control with my setup? Vehicle: 2013 Ford Escape Towing: 2016 Starcraft - AR-ONE Floorplan: 15RB Travel Trailer GVWR: 3200lbs I bought from an RV dealer. They included a hitch that has the vehicle...

Hi Have a 2017 ford escape titanium. It has the foot activated rear hatch sensor. Will the hitch interfere with this at all? On wiring, is it essentially plug and play in the existing ford electrical or is it pretty involved? Thanks | When you...

can I use just the cable and breakaway switch or do I need to buy the complete breakaway system? | If all you need is just a replacement breakaway switch then you could just use the part # FA80-00-2060 as it will basically fit any trailer breakaway...

Does the wiring harness come with this model? | The trailer wiring harness is not included with the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75782. This is because the hitch can be used on 2013 to 2016 Ford Escapes and the vehicles...

For a 2012 Ford Escape, which hitch is the most hidden? | We do offer several hitches that are confirmed to fit your 2012 Ford Escape. Of all the hitches we offer I recommend the Draw-Tite Hitch, part # 75751. This hitch is a Class lll hitch...

Wanting to see if you have a kit for my 2020 Ford Escape Titanium. I haul a pop up camper and the vehicle sags quite a bit. Thanks in advance | I do have an option for you but there aren't any suspension enhancement solutions for a 2020 Ford...

Left turn signal stops working escape And boat trailer while enroute to cabin approx 3 hrs. Left signal doesnt work for approx 1 week after return on escape, than works fine. | The issue you are experiencing is likely a bad ground connection....

Have a 2016 Ford Escape AWD 2.0 motor chan tow 3,500 pounds. Will be towing utility trailer, 18 foot bow rider boat and an 18 foot r-pod trailer loaded up 3,000 pounds. R-pod hats electric breaks. Need recommendations for hitch, wiring, anti...

2006 ford escape The fuze box #1 for tow lights is just an empty hole , no tabs to hold the fuze. I assume the factory connection in the rear of the truck goes somewhere? Only thing i can think of to do is connect to the tail light wires....

Hi, Just wondering whats the difference between the two and if one is better than the other before purchasing. Thanks. | The Curt # C56328 and Tow Ready # 118566 4-pole wiring harnesses that fit your 2013 Ford Escape are very similar powered-type...

Looking for a trailer hitch for my 2019 Ford Escape. Can you tell me what the difference is between the two Curt trailer hitches? which one would you recommend for me? I do NOT have the class II towing package that I see the 13186 does not fit....

I keep seeing your website come up when I am looking for trailer parts and am now ready to purchase bearing buddies and grease. I own a used Carry-On 4x6 utility trailer 1700 lbs cargo weight and I have a spare bearing that says its a 1 1/16....

Just purchased a 2011 Ford Escape that is not set up for a trailer hitch. Need a hitch that goes under the rear bumper bumper is not notched out for a hitch that has a 2inch receiver. | The hitch I recommend for your 2011 Ford escape is the...

I have purchased part number 118251. I am unsure if my vehicle comes with the factory tow package or not, however I do know that it has the connector to match this part number under the driver side rear bumper. My question is will this part...

Do they make a 5 way harness that is custom for a 2013 Ford Escape or do you always use the 4 way custom harness Tekonsha 118566 and then use the 5 way adapter #20036? If using the this setup with the adapter, can you use either the 4 way or...

I have a 4-pin converter box with a run to my battery. Can I tap the 12v wire running to the battery, just before the converter box, to add the 12v hot to the 7-pin connector? It looks like its inline fused near the battery. Ill use a wireless...

I am looking to purchase a trailer hitch w/ wiring for a 2015 Ford Escape 4wd no trailer package. Can I use a the Class III and if so which is the best one to use? Which do you recommend? | On your 2015 Ford Escape, I'd suggest the Curt Class...

How can I get electric brakes along with lights on my 2011 ford escape w/o a factory tow package? | A good starting point is to refer to the two attached articles on brake controllers. These provide detailed explanation of the types available...