Picking Out Replacement Trailer Leaf Spring Info Needed
I need new leaf springs for my car trailer. My old springs are 1 3/4” wide and 14” from the mounting bolt to the centering pin and have 5 plates total that make up the spring. | Without knowing what axle capacity you have it's hard to say exactly...
Will The DMC84FR Door Conversion Kit Fit A Fogatti Tankless Water Heater
Will this DMC84FR work with a fogatti FS06B1? Im wanting to install it on a 1988 Fleetwood Bounder. The original one is a Atwood 6 gallon. Not sure which model. The plate is worn and unreadable. I know the opening is 16 1/4 X 15 5/8. | I contacted...
Can Duncan EAZ Aligner Tow Bar be Used with Roadmaster Base Plate on 1985 Ford Bronco II
A couple of questions: 1 first time towing a toad, bought a 1985 Ford Bronco II, it has a Duncan eaz Aligner Tow Bar, I assume 1985 vintage, is it still safe to use, seems to still be functional? 2 is Duncan still in business, I live in...
Will The Dometic Ultra Breeze Trailer Roof Vent Cover Work With The Fan-Tastic Vent Model # 2250
Just bought fantastic vent 2250 model wanting to get cover for use in rain will this model vent cover the vent and will it allow it to be used when vent is fully open | The Dometic Ultra Breeze Trailer Roof Vent Cover # DMC38FR is designed to...
Replacement 7-Inch Hub/Drum for 1993 Coleman Cape Cod Pop-Up Tent Trailer
I am looking for replacement hub assemblys for a 1993 Coleman Cap Cod tent trailer that have a part# of 4716A1071. Do you have a match for this? | My research indicates that the Coleman part 4716A1071 refers to a Dexter 7 x 2-inch hub/drum with...
Could Optronics Trailer Clearance Lights A32AB and A32RB Replace SAE-A-P2-83
Hi, I am wondering if this item number will work on my camper? A32AB and A32RB The writing on one of my current red light covers is SAE-A-P2-83. Thank you! | The SAE number of a trailer light isn't a reliable way to ID them as it's not a...
Replacement Vent Cover Needed for 1975 Prowler 5th Wheel Trailer
What type vent is of 27ft prowler fifth wheel? 1975 | If you can send me a picture of the hinge style for your 14" x 14" vent on your 1975 Prowler 5th wheel trailer I can help you choose the correct replacement lid from the linked selection. For...
Adapter Needed To Connect The Roadmaster 411-1 Baseplate To A Blue Ox Tow Bar
Hello, I am flat towing a 1990 Bronco II I have already purchased 411-1 base plate kit. I have a Blue Ox tow bar. Will the RM-033 adaptor be the correct one? | The RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter # RM-033 will connect...
Spare Tire Cover for P205/75-15 Tire on 1989 Ford Bronco II
I need a spare tire cover for a 1989 bronco11 | According to my research, the 1989 Bronco II used P205/75-15 tires as the stock tire size. If this is the size of your spare tire, and my arithmetic is correct your tire is 27 inches in diameter....
Recommended Spare Tire Cover for a 1990 Ford Bronco II
Hi, Im looking for a new spare tire cover for my 1990 Ford Bronco ll. My tire size is P225/75R 15. The tire measures about 29 inches in diameter. I would prefer a heavy black vinyl with a soft liner inside and an adjustable draw string to hold...
Replacement Landing Gear Set for a 1991 Avalon 5th Wheel Trailer
Need landing gear Assy. For 1991 avalon 35.5 b | To choose the correct replacement landing gear set you simply need to determine the spacing between the weld stops on your current landing gear set. The standard measurement is 15-1/2" inside...
Can Detail K2 Rampage II Plow be Used with 1988 Ford Bronco II
Will this fit a 1988 bronco2 4x4 and what mounting bracket would be needed. Thanks | Yes, you can use the Detail K2 Rampage II Snow Plow part # K2RAMP8219 on your 1988 Ford Bronco II with the correct custom install bracket kit part # K281100. |
Brake Lights and Turn Signals Not Working After Installing Wiring Harness on 1989 Ford Bronco II
Hello eTrailer Team, I installed this kit last night, and dont have brake/signal lights. Instructions state to ground the red wire from the module if the vehicle has a 2-wire system, and attach it to the brake lights for a 3-wire system. My...
What Is The Difference Between A Disc Brake and Drum Brake Surge Brake Actuator?
I see the DM64VR comes with electric lock out for reverse and it is for disc brakes And the DM72VR doesnt come with electric lock out for reverse and its for drum brakes What makes them different to use for drum brakes? I have drum brakes...
Fit and Compatibility of Roadmaster Classic Base Plate Kit for 1985 Ford Bronco II and Falcon 5250
will this faceplate work with a falcon model 5250 tow bar assy. | Great news! The Falcon 5250 is compatible with the Classic also known as Standard Baseplates # 410-1 for your 1985 Ford Bronco II. The tow bar assembly should have the Quick...
What is the Correct oil Filter Nipple for a 1990 Ford Bronco II with a 2.9 Liter V-6
What is the correct oil filter nipple for a 1990 Bronco II 2.9 l v-6? It uses a Fram PH8A like most Fords. | Since your 1990 Ford Bronco II uses the PH8A filter you will need the Derale 3/4-16 Filter Nipple, # D98020, that you have referenced....
How To Determine The Correct Fitting Door Handle/Lock For Your RV
Locked out of our Bounder, sent kid through the window, door wont open from inside either. I just want to make sure I order the correct part so we can replace it once we actually get the door open. Thank you | The only way to know if a door...
Recommended Suspension Enhancement For A 2008 Fleetwood Bounder 32K
Hi, I'm a new entrepreneur and run a small mobile business out of a 2008 Fleetwood Bounder 32K motorhome. This business requires me to travel over some pretty rough terrain and sometimes go off road. The ride quality is terrible and has broken...
How to Determine Original Tire Size of 1993 Terry Resort 5th Wheel
what size tires do I need to put on my 93 terry resort 5th wheel camper? | Terry brand trailers ceased operations after the 2009 model year, so unfortunately it's not possible to contact the manufacturer. I was unable to find anything online...
Can Support Bar That Runs in Bracket Track on Lippert Manual Pull-Out Step Be Removed
I cant tell from any of the photos – can the step detach from the mounting bracket that holds the assembly to the trailer? I cant tell if there is a cotter pin holding the bar in place which would allow for easy detachment of step from mounting...
Which Curt Trailer Hitch Fits 1984 Ford Bronco II
Will this fit a 84 bronco 2? | We have a Curt hitch that does fit your 1984 Ford Bronco II, but it's not the # 13028 that you referenced. Instead you'd want the Curt # C13011 which is a confirmed fit and would work well. |
Availability of Trailer Hitch for 1986 Ford Bronco II
I have a 1986 Bronco II, what are the install instructions, do I need to drill more holes i frame ? | Thanks for your question about the Curt Trailer Hitch, part # C13011. This hitch is a confirmed fit for your 1986 Ford Bronco II and has a...
Parts Needed to Flat Tow 1986 Ford Bronco 2
What will I need to set up for flat Towing the Bronco 2. Base Plates and Towbar? | We have all of the parts you'd need to flat tow your 1986 Ford Bronco II. First thing is a base plate kit like the part # 410-1 which is a confirmed fit. In...
Installing a 7-Way Connector and Brake Controller On a 1988 Ford Bronco II for Towing
I am planning to purchase tear trailer with electric brakes and need to know what kind of wire harness to purchase and how to install. The Bronco has the towing package and a factory installed hitch but no evident wiring near the hitch. Can...
Filter Your Search
Contact and Help