Are Small Plates of the Westin Fey Diamondstep Bumper Needed to Install on 1970 Ford F-100
What does the small plate that came in the assembly box go? We are having trouble understanding the instructions that came in the box. Thank you | I spoke to my contact at Westin and he informed me that the smaller plates you are referring...
Should the Coils Be Removed to Install the AirLift 1000 Drag Bags # AL60844
Hello! I purchased airlift part number 60844 for my 1970 Buick Skylark. I am replacing the Buicks original springs with new front and rear coil springs and have a similar question: do the coil springs need to be removed before the airlift is...
Solution to Add Trailer Hitch to 1970 Ford Bronco
Do you sell a rear 2 receiver trailer hitch to fit an early Ford Bronco 1970? Note, the 1966 to 1977 model years are all the same. Thank you | I may have a solution for you, but I did some checking with our vendors and there is not a custom...
Trailer Hitch That Exits Through License Plate Area with a Roll Pan
Which trailer hitch for C10 1970 allows for a behind the license plate mounting. no . also, i want to combine this with a roll pan rear with tilt away license plate no bumper Truck is a longbed with coil rear springs. | I do have a trailer...
What is the Height of the SumoSprings Solo Custom Helper Springs # SSR-610-40
what is the overall height of the sumo bump stops? | The overall height of the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-610-40 is 6 inches. These springs have a weight capacity of 1,000 lbs at 50-percent compression and are made...
Which Mount Is Required For Opti-Brite LED RV Dome Light ILL29CB?
Need item # and price for mount on light ILL29CB and a picture | The Opti-Brite LED RV Dome Light - 500 Lumens - Grommet Mount - 4" Round - Clear Lens # ILL29CB you were looking at gets mounted in a 4" round grommet # A45GB. This will require...
Dexstar Steel Mini Mod Trailer Wheel for a 1970 Chevy K10 Truck
Sirs...Could I use one of your 16 trailer tires on a 6 lug, 1970 Chevy K10 truck..Looking for the look of a stock 1970 6 lug wheel but 16 inches.Thanks | Yes, you can use the Dexstar Steel Mini Mod Trailer Wheel item # AM20757 on your 1970 Chevy...
What Are Dimensions of Spacer Tubes Included in Reese Super Titan Hitch # 38208
What are the dimensions of the spacer tubes? | According to my contact at Reese the four spacer tubes included with their Super Titan 4000 Trailer Hitch # 38208 measure 15-inches in overall length and have a cross section that is 3-1/2 x 3-1/2-inches....
Dimensions of Derale 26 Inch Dual High-Output Electric Radiator Fan-and-Shroud Assembly # D16927
Is the 26 x18 dimension the core size or the overall size including the tanks? What size radiator is recommended that this unit will fit? The D16927 unit is the one Im interested in for my 1970 Nova with 500 cu in Big block. Am willing to...
Dimensions of Curt Trailer Hitch Receiver 13900
Can you tell me what the measurement is from the bottom of the vehicle frame to the top of the cross tube and from the bottom of the frame to the top of the receiver tube? Seeing if this will work on my 1963 Dodge D100. | The Curt Trailer Hitch...
What is Hook Throat Diameter of Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10
What is the diameter of the holes the cord fits through on this product. Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 | The dimension you are looking for on the Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 is 3/4...
Do Hellwig EZ 990 Helper Springs Affect Unloaded Ride Height
Will this change the height of vehicle? thanks | No, the Hellwig Helper springs like the part # HE62FR that you referenced do not affect the unloaded ride height. |
How Does Redarc Tow-Pro Elite Controller Know How Much Brake Power to Apply
I am thinking about ordering the Redarc Tow-Pro Elite Trailer Brake Controller for my 1970 chevy c30 with hydroboost and disk brake conversion. I am looking a buying a gooseneck trailer. In the video it says it will apply the trailer brakes...
How Much Tire Clearance is Needed for Timbren Rear Suspension Enhancement
I have a custom truck and was looking into the #TUR350 as it is a universal fit that seems like it would work for my application. How much clearance is needed between the frame and tire for this to fit? | The Timbren Rear Suspension Enhancement...
Progressive Dynamics RV Converter and Smart Battery Charger for Flooded Lead Acid Batteries
Progressive dynamics charger converter. Looking at the 45 watt and it says lithium. Will it work with flooded lead acid? | For flooded lead acid batteries we do have the converter you need, which is the Progressive Dynamics 9300 Series RV Converter...
Installing Timbren Springs On A 1970 Chevy C10 With A Slot In The Bracket
I have a 1970 Chevy C10 that could use the Timbren rear suspension enhancement but the drawings and photos on your website show the axle bumper mount having a hole in the center. Mine, however have a slot. Does Timbren have a different kit...
Do Any of the Jerry Can Holders Fit a 1970 Toyota FJ40 Land Cruiser?
do any of the jerry can holders fit a toyota fj40 spare tire mount? looks like they are only for jeeps. thanks. | I confirmed with the MORyde fit guide that the Spare Tire Mounted Jerry Can Holder for Jeep Wrangler - 5 Gallon - Tall Tray # MR99MR...
Does Pace Edwards JackRabbit Fit 1970 Chevy C10 Short Bed
Looking for a retractable bed cover for a 1970 c10 SWB. Has the 6.5 bed. Never liked the hinged covers and would like to make sure that before spending this kind of money it is the right one. | Yes, the Pace Edwards JackRabbit part # 311-JRC1329...
Materials Used in Bestop Trailmax II Fold & Tumble Fabric Bench Seat B3944137
Hello, I wanted to know if the fabric option of this seat is all fabric or a mix of both fabric and vinyl? I cant tell for sure from the photos If it is a mix, what part of the seat is vinyl? Thanks for your time. | The Bestop TrailMax II...
Can the Side or Traffic Cameras on the Furrion Vision S Wireless Camera System Be Adjusted
The side camera view at the rear of the camper are aimed 1 1/2 ft away from the back of the camper. It says they are not adjustable. Is there a shim kit that would help aim the cameras, so they so straight back along the side of the camper?...
Recommended Electric Cooling Fan for 1970 Ford Mustang with Cleveland 351 Engine
I have a 1970 mustang with a 351 Cleveland engine! Have had a heating problem forever!Runs about 215-220 temp when sitting still in the summer! What do u have to help me with that? | The Flex-a-lite 15" Black Magic # FLX160 is the best available...
Recommended Chrome Rear Bumper for a 1970 Chevy C10
1970 c 10 chevy step side rear crome bumper and brackets | The Westin Fey Diamondstep Rear Bumper part # 21000 is recommended for a 1970 Chevrolet C10. It does not however come with brackets as there are not any for this application but you...
What is the Width Between The Mounting Plates On The Leveling Scissor Jack # JSC-24-IND?
What is the jack dimension between the weld on mounts? | The Leveling Scissor Jack # JSC-24-IND has a width of 2-1/4" between the mounting plates. |
Circuits Needed on 7-way to Install Curt C51180 Echo Brake Controller on 1970 Chevy C10 Pick Up
I have a 1970 Chevy C10, with a 7 pin already in place. What must the 7 pin have to have wired in order for the Echo to work right... Thanks | The 7-way on your 1970 Chevy C10 would need to have functional lighting circuits and a 12-V power...
Filter Your Search
Contact and Help