Rear Anchor Installation Instructions For HappiJack Truck-Mounted Tie Downs
Can you show a video of the anchor bolt tie-downs being installed into the bumpers? I dont understand the point of the gap washer. And where on the bumper do you drill the hole for the bolt? | To install the Replacement Anchor Bolt for HappiJac...
Can the Minimum Length of HappiJacs be Reduced by Cutting Some Off of Threaded Turnbuckle?
Can the minimum length be reduced by cutting threaded part.. I need a slightly smaller turnbuckle.. | I contacted the manufacturer to see if The HappiJac Front Turnbuckle Quik-Load turnbuckles # LC182897 could be shortened by cutting some length...
Installation Help for Truck Bed Camper on to My 1999 Ford F-250
I purchased and successfully installed the TLF2011 Front and TLF 3001Rear Tie downs. Great fit, very pleased. My concern is the clearance of the overhang clearance over the cab. It is pro ably a maximum of 2. I have not attached the turnbuckles...
HappiJac Manual To Electric Conversion Kit
Do you offer a kit with two angled heads and two straight heads? I see you have the conversion kit with straight heads, control board, and controller but I need two of each head. | The Manual-to-Electric Conversion Kit for HappiJac Truck Camper...
How To Install The HappiJac Truck Mounted Camper Tie-Downs
I have a 2007 f-150. The application says these brackets will work, but Im having a hard time visualizing how they attach to the frame and where. They dont appear to be nearly long enough to reach from the outside of my frame to a location...
What is the Weight of the Happijack Electric Camper Jacks # LC736514-ELKIT?
I found a shipping weight for manual jacks in QandA. How much heavier are electric jacks? | Without knowing the particular manual jack models you were looking at, I can definitely tell you the shipping weight of the electric jacks like the #...
TorkLift Custom Frame-Mounted Camper Tie-Downs 2016 Ford F-350
I’m seeing what options u have for a 2016 Ford F-350 superduty Quad cab dually with 8 foot bed and stock receiver hitch for ur slide in camper tie downs | I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - front, # TLF2016. and...
Slide-In Camper Tie Downs For a 2021 Ram 1500 Crew Cab with 5-1/2' Long Bed
Could you please verify this item will fit my truck as your website shows? I dont want to purchase without a guaranteed fit. 2021 RAM 1500 crew cab, with 67inch bed with no running boards and factory hitch. thank you, | The TorkLift Custom...
Can the New Happijac Clutchless Motor Heads Be Used on an Older 4160 System?
Hi, I have a truck camper with Happijac 4800 electric jacks on the front, and Happijac 4160 electric jacks on the rear. A motor went bad, and I understand they arent made anymore. Will Item # LC733960 work with my jacks? Your expert says...
Replacement Circuit Board for a HappiJac Electric Truck Camper Jack
The left front fuse port melted due to a shorted motor. I replaced the motor only to find that the circuit board got toasted. On this board I do not see a model number. In your videos they refer to your original circuit boardinch and give the...
Replacement Leg for 4160 Happijac Camper Jack
I need to replace the rear passenger Happijac on our Northern LIte truck camper. Our current setup is electric with remote. Would you be able to help us with this? Thank you, | Since you have the Happijac 4160 setup on your Northern Lite truck...
Replacement HappiJac Camper Jacks Option For A 1997 Northstar Pop-Up Camper
I have a 97 Northstar truck pop up camper with square manual jacks. is this the correct gear replacement set for them? I do not see any numbers on the jacks to identify the model numbers. I need to fully rebuild one of the jacks gears, are...
Does The Replacement HappiJac Remote Cable Control The Slide-Outs And Stabilizer Jacks
My remote also operates the slide out as well as the jacks. Will this cable control the slide out as well as the jacks for my 2021 Lance Truck Camper? | The Replacement Remote Cable for HappiJac Electric Truck Camper Jack Systems # LC149557...
Replacement Anchor Plates For HappiJac Camper Tie-Downs on 2003 Chevy Silverado 3500
Hi I have a 2003 Chevy 3500 w/crew cab. I have received used HappiJac Truck Camper tie downs but they came off a 2008 Dodge 3500 w/crew cap. So as you may see I need new Backing Plates for my 2003 Chevy 3500. Im not sure which set of replacement...
Will The HappiJac Motor # LC759927 Fit on 4160 Electric Camper Jacks?
Can this motor work on my 4160 electric jacks? | You will need to get the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT as the motor for your 4160 electric jacks is obsolete. This kit contains the updated 4220 jacks with motors,...
Will Brophy Camper Tie-Downs Fit A 2014 Ram 3500 Dually Long Bed
Will these fit a ram 3500 Dooley 2014 model long bed | The Brophy Clamp On Camper Tie-Downs # HSAB typically are not a fit for dual rear wheels since they angle down closely to the body of the truck. With dual rear wheels your fenders stick...
Which Happijac Front Plate Replacement Fits 2001 F-250 Super Duty
Dearest whomever it may concern - We have a Ford F250 Super Duty 2001, short bed. Wondering if the #LC182876 is the correct type of front anchor plates we would need. The Lance camper we have purchased was previously hooked to a Dodge, and...
Installation of the Rear Bumper Tie Downs of the HappiJac Truck-Mounted Camper Tie-Downs
Is there any videos i can look up on exactly how the rear tie downs are installed ? Its the only part of the kit that i have read complaints about on third party RV forums. I see there appears to be some kind of braces for the rear bumper mounting...
Replacement Remote And Circuit Board For HappiJac Electric Truck Camper Jack System
So if I already have the old corded remote, that cable will work with this system to program the remote? Also, it seems that buying the remote and the circuit board separately is less expensive than the kit with them together? Is that right? Thank...
Will Replacement Motor Heads w Circuit Board and Remote Work On HappiJac 4160 Model
I noticed a previous answer to someone stating this LC33960 motor conversion kit would work on a 4160 jack, but in the product description, the 4160 is not included. Can you verify this kit would work for my jacks that are 4160? Thanks | The...
Front Anchor Plate for HappiJac Camper Tie Down for 2015 Ford F-350
will this item #LC182871 work on my 2015 F-350? | The correct front anchor plate for the HappiJack system that would fit your 2015 Ford F-350 is the part # LC182876 actually. | I received feedback from Jameson on part # Lc182876 .Does this tie...
Camper Tie Downs for a 2022 Ram 3500 Dually with 8' Bed, Factory Hitch and Cab Length Running Boards
I have a 2022 Ram 3500 6.7 Diesel 8 foot bed dually with factory fixed running board cab length , OEM hitch and a deployable bed step in the rear bumper. Will the Happijac Truck mounted camper tie down Item # LC23636326 - 205221 fit correctly...
Camper Tie Downs that Fit 1992 Ford F-350 Long Bed with OEM Hitch
Hello- Looking for a rear camper tie down for my truck: 1992 Ford F350 Crew Cab Long Bed 4X2 No side steps under truck bed OEM hitch What REAR tie downs will work for my truck? Thanks! | While Torklift doesn't have any rear camper tie down...
Availability of Electric Happijac 4160 Camper Jack Setup
do you have the acme 4160 in electric | Yes, we do have the Happijac 4160 camper jack system that is electric with the part # LC736514-ELKIT. |
Filter Your Search
Contact and Help