Replacement Gear box for Venture 900-258125
I have a 2015 Shockwave 5th wheel toy hauler. I believe I need a new landing gear box. The landing gear motor is a Venture serial number 9000-258175 LCI PIN 142178 12 vdc - 30 amp. Do you have a replacement gear box that will fit? | The correct...
Curt Trailer Wiring Harness that Fits 2008 Land Rover LR2
Hi, Will C56496 fit 2008 lr2 ? Thanks! | Yes, we confirmed with Curt that the trailer wiring harness part # C56496 that you referenced is a confirmed fit for your 2008 Land Rover LR2. |
Distance From Hitch Pin Hole to Sleeve of Hitch Extender e68YR
What is the distance from the hitch side hole to the sleeve? | The distance from the hitch pin hole to the sleeve is 2 inches for the Trailer Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long # e68YR. |
Difference Between Rhino-Rack # RR67GR and Leg Kit # RRRLKVA for 2008 Land Rover LR2
Whats the difference between this model for $ and the one shown higher up on page #JA2134 that just has 2500 series and lists for $? Im equipping a Land Rover 2008 LR-2 with smooth roof has sunroof but no factory mounted rails at all. Intending...
Will the Trailer Wiring Harness Affect a 2008 Land Rover LR2 Back-up System
I just purchased this kit for use on a 2008 Land Rover LR2 HSE. The cars have rear back-up sensors in bumper. Will this componant disable that system, or is something further required? | No, the # C59496 trailer wiring harness for the 2008 LR2...
Does the Upgraded ModuLite Kit # C59496 Come With a Dust Cover
For product: Upgraded Modulite Vehic le Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit Item # C59496 Does this product include a cap/cover for the 4 prong trailer wire plug? In the pictures there doesn't seem to be a cap...
Is the European Style to 4 way Flat 118710 Considered a 12N connector
Hello, Im looking at your item number 118710. Is the 7 pin European connection it uses the same as a 12N 7 pin connection? | Yes. The Trailer Connector Adapter for Land Rover - 7-Way, Round Pin, European Style to 4-Way Flat # 118710 is considered...
Recommendation For Hitch For 2012 Land Rover LR2
I couldn't tell from the photos if the hitch 119179 was installed without any issues with the plastic bumper cutting or rubbing. One person commented that he used a shim? Which is better hitch/fit Draw Tite or Curt? Approximately how long...
Can LEDs for Optronics RV Interior Dome Light # RVILL39 Be Replaced
Hello, This weekend our oval LED light with a switch stopped working. I took the lens off and found all these little squares, of which would be the LED lighting. How do I change this out? Thank you! | The LEDs inside the Optronics RV Interior...
Will Curt 4-Way Trailer Connector Work With 2009 Land Rover LR2?
I have read that this vehicle cannot be wired for towing because it has a CAN network protocol to transmit signals. Does this kit work on my 2009 Land Rover LR2. Do I need it programmed by a Dealer? Thank you for any assistance. | The Curt Powered...
Will Installing Trailer Wiring Disable the Backup Sensors and Alarm on a 2008 Land Rover LR 2
I have a 2008 Land Rover LR2. It has back up sensors in the bumper and an alarm sounds if vehicle is in danger of backing into something. These back up alarms apparently sound continuously if a trailer is towed. The OEM wiring harness stops...
Adding a 7-Way Trailer Connector and Brake Controller to a 2008 Land Rover LR2
Im curious about what mods to make to my 08 Land Rover LR2 to get an electric brake hookup to work. Our LR2 came with a 4 prong wiring harness and we have been told that to hook up a 7 prong requires splicing and that the splicing will set...
Availability of 13-Pin to 4-Pin Adapter for a 2008 Land Rover Configured for European Standards
Hello, I have a 2008 Land Rover LR2 with a standard European 13-pin trailer light hook-up. Now back in the states, Id like to get a 13 to 4-pin adapter without having to do a complete rewire. Is there such an adapter out there? Thanks!...
Recommended Trailer Hitch And Trailer Wiring For 2008 Land Rover LR2
can i use euro ball mount with Curt 13052-59146 Trailer Hitch | The Curt Trailer Hitch Receiver, part # C13052 is a verified as a good fit for your 2008 Land Rover. This is a Class lll hitch and it has a 2 inch receiver opening. The Euro...
Recommended Electric Fireplace with Blower Fan
looking for one that has a fan on it for the wife. do you carry one with a fan? | The 26" Greystone Electric Fireplace with Remote Control # 324-000065 does force the air out utilizing a blower fan. It works like a space heater with the different...
Can The Tekonsha P3 Brake Controller Be Installed in the Trunk of a 2008 BMW X5
I have an 08 BMW X5 w/oem hitch and wire harness. They provide a trigger wire for an electric break control. Would the Tekonsha P-3 work with this setup? Also, could the P-3 be left in the rear of the vehical? I know I will have to stop the...
Will the C59496 Trailer Taillight Wiring Harness Work on a 2008 Land Rover LR2
I have had alot of difficulty finding compatible parts for my 2008 Land Rover LR2. When searching your site it says that this product is ready to go for my vehicle. This may sound skeptical, but are you 100 certain that it is desgined for and...
Recommended Roof Cross Bars for a 2007 Land Rover LR2 SE
Looking for black rill guard and roof for 2007 Land Rover LR2, SE | While we do not have any grille guards that will work with your 2007 Land Rover LR2, we do have a wide variety of roof racks that'll work great. If your vehicle has a slick...
Will the Thule OutWay 3 Trunk Mount Bike Rack Fit a 2008 Land Rover LR2
Will this bike rack fit a Land Rover LR2 2008? | I checked with Thule and the OutWay 3 bike rack, # TH56BV, will fit your 2008 Land Rover LR2. If you will be carrying women's, children's, or alternative frame bike racks, I recommend using...
Recommended Trailer Hitch And 4-Bike Carrier For 2011 Land Rover LR2
Will Draw-Tite Max-Frame Trailer Hitch Receiver, # 75688, Fit my 2011 Land Rover LR2 HSE? And could you please recommend a bike rack which can carry 4 bikes from you ? | The Draw-Tite trailer hitch, part # 75688 will work great on your LR2....
Parts Needed to Install 7-Way Trailer Connector on 2008 Land Rover LR2
Hi, I would like to know what wire to buy to install on my Land Rover LR2 2008. Your finder tool tells me to get a 4-way flat connector, but the trailer I want to connect is a 7-way connector. Do you sell 7-way connectors for the LR2? | To install...
Does the Draw-Tite Hitch 75688 for a 2008 Land Rover LR2 Require Trimming of the Rear Fascia
land rover states that the bumper needs to be cut to fit towbar is this true? | I could see needing to trim the rear fascia for the Land Rover OEM hitch, but the Draw-Tite hitch does not require fascia trimming. It is designed to fit just below...
Will The MORryde MR34AR Shock Absorbing Equalizers Fit A 2021 Vengeance Rogue Armored 4007
We have a 2021 Vengeance Rogue Armored 4007 with lippert 7000lb axles. I want to upgrade the suspension with equalizers and a shackle wet bolt kit. There are so many different choices for equalizers. Are there pros and cons for each? Which...
LED Light Strip Flickering When Plugged Into 4-Way Connector on 2008 Land Rover LR2
I have a 2008 landrover lr2. Im trying to install a light strip along the bumper that plugs into my 4 pin trailer connector, but it just flashes. I know there are 7-4 way adapters that correct this, but my vehicle only has a 4 pin connector....
Filter Your Search
Contact and Help