Replacement Gear box for Venture 900-258125
I have a 2015 Shockwave 5th wheel toy hauler. I believe I need a new landing gear box. The landing gear motor is a Venture serial number 9000-258175 LCI PIN 142178 12 vdc - 30 amp. Do you have a replacement gear box that will fit? | The correct...
How Do You Connect 4-Way Flat Connector In Rear Cargo To Added 7-Way On a 2010 Mazda CX-7?
I am wanting to install a 7 pole harness on my 2010 Mazda cx7. Looking at the site the process requires installing a 4 pole harness and then a 4 pole to 7 pole adapter. The thing is the 4 pole looks it connects out the bottom the the back hatch...
Fit of Thule Passage TH910XT Trunk Mount Bike Rack on 2012 Mazda 3 Sedan
Would this bike rack work for a Mazda 3 and if not could you recommend one that would work? | The Thule Passage trunk mounted 2 bike rack you referenced, part # TH910XT is indeed a fit for your 2012 Mazda 3 Sport Sedan. I have confirmed this...
Is the Curt Cam Buckle Stabilizing Strap Required for the Draw-Tite Max-Frame Trailer Hitch Receiver
Hi, I just wanted to verify if there was any requirement for a stabilizer strap for a bike rack with the Draw Tite 75512 - 2inch trailer hitch I saw that the Curt hitch did have this requirement. We will be using a Thule Hitching Post Pro and...
Which Trailer Hitches, Ball Mount, Trailer Wiring, and Hitch Balls Fit a 2007 Mazda CX-7
This show a 2010 model year installation - will part 75512 fit my 2007 Mazda CX-7? | Yes. The Draw-Tite Trailer Hitch, # 75512, will fit on your 2007 Mazda CX-7. For many vehicles, the manufacturer will not change the chassis and/or frame platform...
Better Clearance to Carry Trailer Hitch Mount Wheelchair Carrier on 2011 Mazda CX-7
I have a 2011 Mazda CX-7 with a 2 inch hitch. I have a cargo carrier with a ramp transport lawn mower, snowblower, etc that folds up from you about a year ago. When I fold-up the cargo carrier it does not quite clear my back bumper. Additionally,...
Right Side Trailer Lights Not Working on Trailer Towed by a 2011 Mazda CX-7
I installed this module per the instructions and the passenger side of the trailer tail lights do not work. The running light on that side works fine. I checked the light itself for functionality and it works solo. Any ideas? | This sounds like...
Hitch and Expandable Bike Rack Recommendations for a 2008 Mazda CX-7
I do not have a hitch on my car yet. Id like to get a 2-bike platform rack like the Thule T2, or Kuat NV, etc that has the option to add a 2-bike extension. The only racks Ive noticed that offer this option are the ones that mate up to Class...
Can LEDs for Optronics RV Interior Dome Light # RVILL39 Be Replaced
Hello, This weekend our oval LED light with a switch stopped working. I took the lens off and found all these little squares, of which would be the LED lighting. How do I change this out? Thank you! | The LEDs inside the Optronics RV Interior...
Largest Trailer Hitch Receiver For 2010 Mazda CX-7
Can you get a trailer hitch with a 4 inch receiver for a 2010 Mazda CX-7. | A 4 inch trailer hitch receiver is not available for a 2010 Mazda CX-7, or for any vehicle that I am aware of. The largest hitch that fits a '10 CX-7 has a 2 inch receiver: -...
Locking Hitch Pin Recommendation for the Thule Vertex Bike Rack
hello, will item HE6033 work for the thule vertex bike rack? | I do have a threaded, locking hitch pin for your Thule Vertex bike rack, but the Heininger Threaded Hitch Pin, # HE6033, will not work with the Vertex bike rack because the threaded...
Does Saris Bones Hitch Bike Rack Attach to Trailer Hitch or Ball Mount
Does this need a ball mount? | The Saris Bones Hitch 2 Bike Rack # SA882 installs directly to a trailer hitch and would not need a ball mount at all. Since there is sometimes confusion on which part is the "hitch" and which is the ball mount...
Will the SportRack Vista XL Cargo Box Fit a 2011 Mazda CX-7 with Factory Roof Rack
We have a 2011 Mazda CX7 with factory cross bars @ 27.5 inches apart. The cross bars are fixed. Will this box work with our setup? Thanks | The crossbars on your 2011 Mazda CX7 are within the mounting range, 25-7/8", 27-7/8", or 29-7/8"...
How to Install the Alpena LED Fog Litz 4 Part # ALP77160 with a Toggle Switch
How do I install these so that they will work only when my low beam is in use? Thank you. | I do have a way for you to install the Alpena LED Fog Litz 4 part # ALP77160 on your 2010 Mazda CX-7 but unfortunately I cannot recommend you use them...
Correct Wiring Harness for 2010 Mazda CX-7 Without Tow Package
I have a base model CX7 sv. It does not have an optional towing package, however it does have the female port on the passenger side of the car as shown in your video for part C55593. Is this port now standard? I was looking at part 118405 until...
Will the Thule OutWay 2 Bike Carrier # TH45JV Fit a 2011 Mazda CX-7
Will this fit a 2011 Mazda CX7? | The ThulOutWay 2 Bike Carrier, part # TH45JV, will fit the 2011 Mazda CX-7 as long as it does not have a spoiler. Also, the rear wiper can not be used when the bike carrier is attached to the car. I am including...
Clearance From Center of Hitch Pin Hole To Rear Bumper of CURT Hitch # 12093 on 2011 Mazda CX-7
inches from center pin to clear bumper on 2011 CX-7 Mazda.my bicycle rack is just over 6inch from center pin to upright. Have purchased two hitchs from you. Also need proper wiring harness for 2011 sport no power seat, but did they wire the...
Tow Hitch Mount Bike Rack with Good Ground Clearance for a 2011 Mazda CX-7
Just bought a 2011 Mazda CX7 and had hitch installed with a 2 inch receiver opening. Unfortunately, once the 3 bikes are put on the rack, it looks like the bike wheels are so low to the ground. Guess the body frame of the Mazda cx7 is lower...
What Is The Empty Weight Of Curt Cargo Carrier C18151?
What is the empty weight of Item # C18151 | The 20x59 Curt Cargo Carrier # C18151 weighs about 57lbs when empty. This fits 2" receivers and has a weight capacity of 500lbs. If you are looking for a lightweight option then perhaps the 19x60 Curt...
No Power on Curt Trailer Wiring Harness on a 2007 to 2012 Mazda CX-7
The Curt wiring harness will not function. Checking for voltage on the fused red wire on the Curt harness, there is no voltage. It appears that Mazda didnt hook up the battery wire. Anyway, I stumped without a wiring diagram. Have you ever...
Will the Thule Passage 2 Trunk Mount Bike rack Fit a 2010 Mazda CX-7
Will this rack fit my 2010 Mazda CX-7 | Thule does list the Passage 2 bike rack # TH910XT as a fit for the 2010 Mazda CX-7. But, if the vehicle has a rear spoiler it is considered as a not fit application for trunk mount bike racks. I have included...
Fit of Curt C55593 for a 2009 Mazda CX-7
Hello I am looking for a wiring harness with 4 flat plug that installs into the existing wiring harness in my 2009 Mazda CX7. I am look at the Curt harness item number C55593 I just want to make sure this one just plugs right in. Also, this...
Hitch And Wiring For A 2010 Mazda CX-7.
I need to purchase a hitch and harness for my 2010 Mazda CX-7 Sport. What do I need to know to tow a 14inch fishing boat trailer using a 1 7/8 ball? | For your 2010 Mazda CX-7 I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom...
Trailer Drivers Side Tail Light Not Working, All Other Lights Work
Hey guys I bought a hitch and wiring for my 2010 cx7 and it plugged in fine and when I went to turn the lights on, all the lights worked beside the driver side back light aka the license plate side. If u guys can help me out in any way please...
Filter Your Search
Contact and Help