Recommend Trailer Hitch for 2010 Ford Mustang V6 with Boss Rear Bumper
I have a 2010 mustang V6 coupe but i have a BOSS rear bumper. Can I use part # 24863 on my vehicle or do i have to specifically use a 2010 mustang hitch? | For your 2010 Mustang V6, you will need the Draw-Tite Trailer Hitch, part # 24840. The...
Trailer Hitch Receiver and Wiring Harness For a 2000 Honda S2000
Hi, Im interested in the S2000 hitch C11198 but it says that it only fits 2004 - 2009 S2000s. Do you guys have one that will fit a MY 2000 S2000? Thanks | The Curt Weld-On 2" Receiver # E17 will allow you to have a receiver custom fabricated...
Ground Clearance Using Fulton F2 Swivel Trailer Jack with Pivoting Footplate
I would like to know the distance from the bottom of the bracket where it would bolt to the trailer and the base of the foot. | The Fulton F2 trailer jack # F1413230134 can get pretty low. I went out to the warehouse and pulled one of these...
No-Drill Trailer Hitch for a 2012 Ford Mustang 6 Cylinder Coupe
Will this hitch fit the 2012 Mustang 6 cylinder coupe without modification to the vehicle or drilling holes? | The Draw-Tite trailer hitch, # 24863, will fit your 2012 Ford Mustang, 6 cylinder coupe. There is no drilling involved and you should...
Trailer Hitch and Wiring Recommendations for a 2017 Ford Mustang Fastback
Hello, What is the best part# to tow a uhaul 4foot x 8foot Cargo Trailer with my 2017 v6 mustang ? Thanks much in advance! | Curt trailer hitch # C11405 will be the easiest hitch to install on your 2017 Ford Mustang fastback. This is a Class...
Trailer Hitch and Bike Rack Recommendation for 2012 Ford Mustang
I am moving to California from Seattle. I drive a 2012 Mustang and want to take my bike on the back on a rack. Id like to have it on frame hitch and not a trunk mount type. What do you recommend? I noticed Ford Mustang was not an option...
Recommended Hitch Lock for Curt Drawbar on 2015 Ford Mustang
Hello, I purchased a curt hitch for my 2015 mustang and id like to buy the curt class Drawbar 1 1/4 inch. Id like to know what locking pin would work for for product. | To secure and lock the Curt Class II Drawbar # C45519 referenced in your...
Compatibility of Curt # C11405 and Magnaflow Cat-Back Exhaust on 2016 Mustang Fastback EcoBoost
Hi, I have a 2016 Mustang ecoboost fastback and have fitted the curtis class 1 round hitch. Was wondering if there will be any issues getting the magnaflow competition or street series cat backs on the car with the hitch already fitted? | For...
Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
On a Dexter 5 on 4 1/2 Hub, should there be a washer between the axle nut and the outer bearing? On all other trailers and cars there is a washer, none on the Dexter trailer I have, just a large nut that covers the whole bearing. | Yes, there...
Hitch and Bike Rack Recommendation for a 2006 Ford Mustang
Is there a 2 inch hitch available for a 2006 Mustang V6. I have a nice bike rack but it requires a hitch with a 2 inch opening. The 1 1/4 would be too small. Im not going to tow, just carry bikes. | The 2-inch hitches are reserved for vehicles...
Is the Mini Trailer License Plate Light # LP31CB DOT Certified
Hello, Is this license plate light DOT certified? Will it meet all Federal Motor Vehicle Safety Standards for installation by manufacturers? Thank you, Christopher | Yes, the Mini Trailer License Plate Light # LP31CB had to go through testing...
Options For Adding A Trailer Hitch To A 1965 Ford Mustang
Hi, I am looking for a hitch for my 1965 ford mustang. Do you have one? Im not towing, just using it for a bike hitch. | That is a very cool car. I do have a few potential options for you, but we do not carry a custom fit hitch for a '65 Mustang. We...
Will Curt Class I 1-1/4 Inch Hitch # C11312 Fit a 2006 Ford Mustang GT With Dual Exhaust
Still dont understand for sure if this will Fit 2006 Mustang GT. I do not have california special, nor shelby, but do have dual exhaust which doesnt appear on any of the installation photos. Im really interestedin this product, but want to...
Recommended Tilting Bike Rack For 2 50lb Electric Bikes On 2014 Ford Mustang and 2016 Ford Edge
Best bike rack for fat tire rad ebikes. Looking for bike rack to use with hitch? Tilt away, secure able to handle 2 fat tire 50 lb ebikes?? | The best bike rack will depend on which hitch and vehicle you have since on some vehicle's the receiver...
Best Trunk Mounted Bike Rack Recommendatio for a 2015 Ford Mustang
what is the nicest trunk rack you guys have to fit my 2015 Ford mustang? its a hardtop | The nicest trunk mounted bike rack around is the Thule OutWay Part # TH45JV. I checked with Thule and they list it as a fit for your vehicle as well. What...
Bike Rack Recommendation for a 2007 Ford Mustang CS/GT Convertible
I have a 2007 mustang cs/gt convertible will this fit my car | If your 2007 Ford Mustang California Special GT has a trailer hitch installed then yes, the Swagman bike rack # S63360 will fit. We do not have any trailer hitches that will fit...
What is the Maximum Speed Rating for Thule Self-Tensioning, Low-Profile Snow Tire Chains
I have a 2006 Ford Mustang and am looking for some extra help this winter. I live in Iowa and winters can get pretty bad. I want a product that is easy to install on the go and can perform. The wheels and tires i have on my car are aftermarket...
Trunk Mount Bike Carrier for a 2012 Ford Mustang Convertible
Is there such a thing?? I have a 2012 | As a matter of fact there are trunk mount bike carriers that will fit your 2012 Ford Mustang convertible! I have included a link to the options for you (which are all variations of the Saris Bones, # SA805BL)....
Does Saris Bones Trunk Bike Rack SA805BL Fit 2012 Ford Mustang Convertible
Ive read that this bike rack will work on a 2012 Mustang Convert. If it does not work with my 2012 Mustang can I get a refund? | Saris has test fit their Saris Bones 2 Bike Rack part # SA805BL on a 2012 Ford Mustang Convertible like yours and...
Carrying 2 Bikes on a 2006 Ford Mustang with Rear Spoiler
Will this fit my car with the factory rear spoiler? | I spoke with my contact at Thule and she stated that none of the trunk mount bike racks will fit on a 2006 Ford Mustang if it has a rear spoiler. The spoiler will interfere with the safe...
Parts Needed to Flat Tow a 2002 Ford Mustang
is it ok to flat tow a mustang with base plate | According to my research the manual transmission models of the 2002 Ford Mustang can be flat towed. Consult the vehicle owners manual on the proper towing procedure for the vehicle. If you have...
Replacement Cradle for Rhode Gear Shuttle Bike Rack
i have a rhodes gear shuttle rack, given to me, that does not have any cradles on it. i would like to add some. does any of the replacement cradles you have fit 1 inch tubing. thanks | The correct replacement cradles for your Rhode Gear...
Fit and Compatibly of Kuat Sherpa 2-Bike Rack on a 2016 Ford Mustang with Draw-Tite Hitch # 24928
Hello, I will be installing the Draw-Tite Sportframe hitch onto my 2016 Ford Mustang and was wondering if the Kuat Sherpa 2 bike platform rack will work fine with this vehicle. Is there enough clearance between rack and bumper with both up and...
Is There a Weld Stop On the Curt Hitch part # C11405
Does this hitch have an internal back stop in the receiver tube? If so what is the measurement from the pin hole to the back stop. This is important to know when selection a bike rack to insure fit. | The hitch tube of the Curt hitch part #...
Filter Your Search
Contact and Help