Result:

Articles

Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire

I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...

Trailer Wiring Harness For A 2018 Chrysler 300S

Im looking at ordering this wiring harness for a 2018 chrysler 300s but there are 2 different wiring harnesses listed for my vehicle which one should I buy and whats the difference | Hi Jamie! For your 2018 Chrysler 300S, I recommend the Curt...

How to Determine Which Ball Mount Will Have Enough Rise for Curt Hitch on a 2005 Chrysler 300c

So I am considering the curt class III hitch #13465 for my 2005 Chrysler 300c. I have seen a previously answered question suggesting the #d-26 ball mount would be recommended to clear the rear bumper. I notice that the D-26 has a lift of 3/4...

Thule Spare Me Rack on 2010 Rav4 with Back Up Camera

I see that I cannot use a Thule Spare Me 2 bike carrier if I have a backup camera on my 2010 Rav4. Why? What are the alternatives? I can live without the camera for a short term. Thanks! | I spoke with the folks at Thule regarding the spare...

Will Trailer Hitch for 2012 Chrysler 300 Fit SRT8

I see you have trailer hitches for a 2012 Chrysler 300. Do they also fit the SRT8 version of the 300? | Hey Jim, welcome back! The Curt hitches fit the 300C and 300S. The Draw-Tite Max-Frame Trailer Hitch Receiver # 76145 is confirmed to fit...

Will The Curt Trailer Hitch Receiver # C13236 Fit A 2019 Chrysler 300

Is the c13236 hitch fit my 2019 chrysler 300 6cyl with dual exhaust | Hey Ken, Yes, the Curt Trailer Hitch Receiver # C13236 is listed as a fit for all models of the 2019 Chrysler 300 so it would be a fit. If you plan on towing a trailer or...

Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer

I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

3 Bike Platform Bike Rack Recommendation for 2007 Chrysler 300

I am looking for a hitch mount platform bike rack that can hold three bikes. I have a 2007 Chrysler 300. Can you recommend a product for my needs? Thanks! | For a 3-bike platform rack the Kuat Transfer part # KU24FR would be a great option....

Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed

can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...

Measuring for Trailer Hitch Receiver Ground Clearance on a 2013 Chrysler 300

I am looking at either the Drawtite 76145 or Curt C13093 receiver for my 2013 Chrysler 300. It appears that the receiver clearance from the ground is more on the Drawtite than the Curt. I couldnt find any specific dimensions from the frame...

Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215

I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...

4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo

HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...

Recommended Weight Distribution System For Prolite S Camping Trailer

Hi, my Prolite S camping trailer is @ 1600lb heavy, tongue weight is 200lb, what weight distribution you can recommended for me?? Plese ASAP. Thanks | For your Prolite S camping trailer, I recommend the Reese Steadi-Flex Weight Distribution...

Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine

my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...

Correct Trailer Hitch for a 2013 Chrysler 300S

What trailer hitch fits my 2013 Chrysler 300s | The trailer hitch options for 2013 Chrysler 300 are all compatible with the S models. I recommend going with the larger 2" opening due to the higher capacity and abundance of hitched mounted accessories...