Rogue Select  x   >   Draw-Tite  x   >   Caliber  x   >  

I want to buy both the Draw-Tite 24769 and the Curt Cargo Carrier 18145 for my 2011 Dodge Caliber. My only reservation is that the Curt Cargo carrier requires a 6 clearance from the receiver pin hole on the hitch to the end of the rear bumper...

Does the included draw bar with this item have a hollow shank? | I went out into our warehouse and inspected the drawbar that comes included with the Hidden Hitch Trailer Hitch Receiver with Drawbar - Custom Fit - Class I - 1-1/4 inch, part...

Does this trailer hitch also fit a 2015 Nissan Rogue Select? | For your 2015 Nissan Rogue Select I recommend Draw-Tite trailer hitch # 75902. This is a Class III trailer hitch with a 2 inch receiver rated for 350 pounds tongue weight and 3,500...

draw-tite model no. 24769 and curt no.c11006. of these hitches which ones will fit my 2008 dodge caliber r/t. they all look the same but some of the manufacturers say their hitch will fit all models except r/t models. | The good news is we have...

Can you tow a Jet Ski with a Dodge Caliber 2007? | It's very possible that you could tow a Jet Ski with your 2007 Dodge Caliber but you will need to check a few things first. You will need to know what the owners manual of the Caliber says is...

I have 2009 Dodge caliber. I am buying a trailer hich for my 250 lb jet ski. I saw that the Draw-Tite Ball Mounts - 3591 is recommander but I am debating about getting the 36061 riser because that i am worried that the caliber is low and the...

Hello. Im a little confused? Ive found 2 references to the availability of a hitch for the 2007 Dodge Caliber R/T model. From one question on this subject you state there are not manufacturers who make a hitch for the R/T model. Then another...

Can the Yakima EXO be attached to the 2015 Nissan Rogue? Will the 2015 Rogue be strong enough to handle the weight going up and down the steep mountains in Arizona? My Will the rear hatch door open if the tilting cargo carrier is tilted or...

I would like to carry a dirt bike on the back of my dodge caliber. The bike carrier requires a 2inch opening. Can i get a class 3 with a 2inch for my car? The dirt bike weights around 220 lbs. Does a class I come with a 2inch opening? |...

I have a draw tite hitch and im trying to get the right size ball mount to fit my trailer and my trailer needs a 2 inch ball | In order to choose the correct ball mount for your tow vehicle and trailer, you will first need to take a couple of...

Will the Thule OutWay 3 Trunk Mount Bike Rack fit a 2011 Dodge Caliber? | The Thule OutWay 3 Bike Rack, # TH56BV, will fit on your 2011 Dodge Caliber as long as it is not the SRT4 model with the rear spoiler. The clips will attach to the top...

I was looking at the tow hitch for my 2008 Dodge Caliber. I want to know if it comes with the hardware and receiver as well. Plus I would need the wiring harness for it. Can you please let me know when you can? Thanks | The Draw-Tite Sportframe...

I wanted to know what would be the best ball mounting for my 2011 Dodge ram caliber car. The weight limit is 1500 lb. Pulling a trailer. I have already received the carrier and waiting for the hitch its 1 1/4. I would want to get one that would...

Im looking for a trailer hitch for my 2007 Dodge Caliber R/T 2.4L Engine and all I can find is a Class I hitch. Do they make any other classes for my car? The class I will work but obviously the stronger the better. Thank you! | All of the...

TRAILER HITCH FOR A 2009 DODGE CALIBER | The trailer hitch receiver I recommend for your 2009 Dodge Caliber is the Draw-Tite Trailer Hitch Receiver # 24769. This hitch is the easiest installation for your vehicle, requiring nothing more than...

Any Problems or issues using this hitch on the 2011 model. Looking to put a bike rack on and on occasion use a cargo carrier. Great web site! | The Draw-Tite Class I Sportframe Trailer Hitch, # 24769, would be a great choice for your 2011 Dodge...

The ball mount for this hitch will not go far enough in to be able to the hitch pin. There is a protusion in the back of the 1 1/4 hole that prevents the mount from going in far enough. Does this hitch require a special depth ball mount? Thanks...

Hello, could you please confirm that Draw-Tite Trailer Hitch # 75902 is guaranteed to fit my 2015 Nissan Rogue SELECT. I am somewhat concerned by the problem mentioned in the review by Northeast Adventure of 11/14/2014, which is the hitch bolt...

Im looking to buy a hitch kit and a cargo carrier for my 2008 caliber. Im selling the car soon so I dont want to spend too much. Instead of going w a roof rack I thought might be better the carrier as I can use it on my next car. What would...

What is the maximum tongue weight? The mopar hitch is Class 1, and even at that, only carries a 150 lb. tongue weight. So I am looking for something with more weight bearing capacity. I want to carry three bikes. Thanks. | Anytime you are...

The only trailer hitch you sell for a 2008 Dodge Caliber is the 24769 Class I 1 1/4inch Tow Bar. Will this Class II Swagman XC2 Bike Rack fit the Dodge Caliber Hitch I need to buy? | The Swagman XC2 Bike Rack # S64650 will technically fit the...

Hi, Will the 24769 fit my car and is it good for 3500lbs. Sincerely, | This Draw-Tite Trailer Hitch Receiver, part # 24769, will fit on your 2008 Dodge Caliber. Also, this hitch has towing capacities of 2,000...

Will the hitch C11006 fit on a AWD 2007 dodge calibe r/t model? you mentioned in one of your comments it would fit an r/t but will it fit the r/t awd model also? | I spoke with my contacts at both Draw-Tite and Curt, who both confirm that their...

Looking to purchase the 24769 draw tite hitch. Will this ht5r fit ? Dodge Caliber 2007 | The Draw-Tite # 24769 hitch is confirmed to fit your 2007 Dodge Caiber as long as it isn't an SRT-4 model. The Brophy hitch adapter # HT5R will fit into...