Best Trunk Mounted Bike Rack for 2020 Kia Rio 5 Door Hatchback
Looking for best bike rack for my 2020 Kia Rio 5 Door Hatchback | The best trunk mounted bike rack that fits your 2020 Kia Rio 5 door hatchback is the Yakima Fullback part # Y02634 as it fits the easiest and is loaded with features other bike...
Timbren Axle Less Kit for Trailer that Weighs 3,045 lbs
Hi, I have a home made camper trailer that weighs 3045lbs. when fully loaded with all my gear. I bought from etrailer a 3500lb axel brakes and hubs, but used my own leaf springs new rubicon express 4 lift jeep springs Turns out the springs arent...
Will Curt 13412 Class III Hitch for 1985 Jeep CJ-5 Fit 1985 Jeep Scrambler CJ-8
Do your 1985 cj7 hitches. Fit 85 cj8 | None of our manufacturers list a fit for the 1985 Jeep CJ-8 Scrambler, but I can provide you a photo showing the bolt hole spacing for the Curt # 13412 hitch for the 1985 CJ-5. You can compare those dimensions...
Receiving No Power at Didoes on 1985 Jeep CJ-7 from the RV 4-Way Trailer Connector
I am trying to wire my CJ-7 lights for towing with my 1999 Fleetwood Vision motorhome. The RV has a 4-wire round connector. I have installed diodes to isolate the jeep wiring from the RV wiring. The brake, turn signal, and clearance lights work...
Which Soft Top Works for a 1983 CJ7?
Inquiring about a replacement soft top for my 1983 CJ7. The Jeep does have snaps, but the current top just uses the channel system. Just want to make sure, whatever I purchase ... will FIT. | Part # B5579915 works for your application. This...
Both Turn Signals Blink on MaxxTow Tow Lights # MT70097 When Tow Vehicle Signals Are On
I installed my new light kit as per video from 2007 Chevy 2500 Silverado to a 1982 CJ7. No splicing no added features, right out of the box. The problem is both lights blink at the same time from both Rand L turn signals. Brake and Night...
Availability of Replacement Top for 1951 Willys Jeep M38-A1
What is the availability of a top for a 1951 willys M38A1 Jeep with bows and doors. What colors are available Im sure not OD green...lol | I spoke with my contact at Bestop, who tells me that their Tigertop # B5140501 would be an excellent fit...
What Are the Bestop TrailMax II Pro Seats # B3945115 and # B3945015 Made of?
I’m interested in this passenger seat and a driver’s side matching seat. The description says “vinyl” but it also says “Black Denim.” Can’t figure out if it’s a vinyl seat or a denim seat. Any ideas? | The Bestop TrailMax II Pro - Vinyl...
Equipment Need for Flat Towing a 1980 Jeep CJ-7
I have a cj7 Jeep that I would like to tow behind my motorhome. Im interested in a Roadmaster stowmaster 5000. I have yet to purchase the towbar. Would this be the recommended apparatus or should I go with another product? Then I will need...
D-Ring Adapter for Aftermarket Bumper and Falcon 2 Tow Bar on Jeep CJ-7
our 1986 CJ7 jeep has an after market bumper TJ Wrangler Trail Series winch bumper with 5/8inch D ring mount. We have a Falcon 2 towing system. What do you recommend as an adaptor. Thank you | Are you sure the D-rings on your bumper are 5/8"...
Are The Bestop Element Enclosure And The Bestop Element Upper Compatible On A 1982 Jeep CJ-7
You answered the question about the doors not matching the factory OEM uppers do too not having holes. I have the Bestop soft upper, thinking they would fit the factory doors, and they do not which is why Im looking at this product. Does this...
Can Bulldog Winch Mounting Kit for 1986 Jeep CJ-7 Fit with Tow Hooks Installed
My Jeep has the factory mounts on frame for tow hooks. Will this winch plate mount on these tow hook mounting brackets? | The Bulldog Winch Winch Mounting Plate Kit # BDW20009 that you referenced attaches to the top of the bumper on your 1986...
Distance Between Bolt Holes on the Rampage Tow Hook Kit for Jeep Part # RA7505
what is the measurement from center to center on the bolt holes on the hooks for a jeep cj7 | I went out to our warehouse and measured the Rampage Tow Hook Kit for Jeep part # RA7505 for you. The distance between each bolt hole is 1-3/8" on...
Wiring Recommendation for Flat Towing a 1982 Jeep CJ 7 Laredo
I will be towing a 1982 Jeep CJ 7 behind a truck, Im not sure if I need to use a diode kit, to use the lights on the Jeep while towing. We did have a 2006 jeep that when we towed it all the running would work. What part would I have to order. Thank...
Draw Tite Hitch that Fits 2023 Kia Rio
Will this hitch fit my 2023 Kia Rio 5-Door? | Yes, the Draw Tite hitch part # DT43GR does fit the 2023 Kia Rio models. |
Why Doesn't Bestop TrailMax II Fixed # B3943715 Have Seat Belts
Lookinh for a seat like this for my 1982 cj7 but with seat belts. Any available? | Seat belts bolt to the vehicle and not to the seats so the Bestop TrailMax II Fixed # B3943715 would fit your 1982 Jeep CJ-7 but since you would have to run the...
Will Curt Trailer Hitch 13412 Fit a 1982 Jeep CJ-7 with 20 Gallon Gas Tank
Can this hitch be installed on a 1982 CJ 7 with a 20 gallon gas tank? | We have had this question come up before and have determined after talking to Curt, the manufacturer, that trailer hitch # 13412 will fit a 1982 Jeep CJ-7 with the optional...
Winch Mount for a 1985 Jeep CJ7
Im looking for a raised winch mount for a cj7. The description says this is for a cj7 but the expanded description says it is for a yj or tj. Do you have a raised mount for a cj7? I want to use it with a double tube bumper. | There is indeed...
How Far Does The Curt Trailer Hitch Receiver 13412 Stick Out On The 1985 Jeep CJ-7
85 Cj 7 Laredo. Im looking for a frame mounted hitch, but how far does it stick out past the rear of the Jeep? Im also looking for a bumper and need some sort of reference. | The Curt Trailer hitch receiver part # 13412 sticks out about 6-1/2"...
Parts Needed to Install the Kat's Circulating Tank Heater Part # KH13200
1986 CJ7 equipped with an AMC 360V8 have lost instructions :- for install, can you email me a copy? Also, indicates that should not be installed on vehicle with 100 antifreeze coolant? What mix should be made? | I have attached the installation...
Wiring Roadmaster Diode Kit # RM-154 on a 1983 Jeep CJ-7
Trying to figure out where to splice in the four diodes on by 83 CJ7. There are two main bulbs, One that lights for reverse at top and one that lights with brake, turn AND running lights first notch on headlight switch. There are green and white...
1984 Jeep CJ7 - Will The Curt 13412 Work With The Stock Rear Bumperettes?
1984 Jeep CJ7 Will the stock rear bumperettes work with this hitch? | Yes, the Curt Trailer Hitch Receiver # 13412 will indeed work with the stock rear bumperettes on your 1984 Jeep CJ-7. |
Winch Mount that Fits 1981 Jeep CJ-7
Hi, will this be adequate for a hitch mounted winch? | Yes the winch plate for CJ7 and CJ5 Wranglers # BDW20009 would do a great job for a winch mount for your 1981 CJ-7. It uses the standard winch mounting bolt pattern so it would work with...
Brake Controller Recommendation for 1983 Jeep CJ7
What wiring kit/harness/parts would I need to wire up my 1983 Jeep CJ7 to pull a small trailer with electric brakes? The trailer has a 7 pin hookup. Thanks. | You will need to start with a 4-way (if you do not have one). For that you would want...
Filter Your Search
Contact and Help