Result: fitting

We don't have a sealed bearing option that fits though. | Hi my husband and I are looking for the complete replacement of a spindle, hub with sealed bearings and brake for a 2010 ranger trail boat trailer. Its a 10inch 5 lugs...

Hello Devon, Yes, the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS29VR will fit your 2024 Ford Ranger Raptor. I see that there are air bag kits available for the 2024 Ford Ranger, but unfortunately none of them fit the Raptor model. |

Which grease seals will fit my trailer? | Have 2001 Casita Spirit with Dexter Axle. Drums have 8-247 printed in raised letters on drum. Axle diameter is approx. 1.385 inches. Which grease seals will fit my trailer? | Sounds...

So for that the Titan part # T4750620 would be an excellent choice. This fits the 2-5/16 inch hitch ball, has the 12k capacity, has an electric lockout, and has a drop built into the coupler portion. | I need to replace my surge...

Hi Christopher; for the Dexter Electric Trailer Brakes # K23-472-473-00 the 10" diameter is the inner diameter of the drum the brakes fit. The 1-1/2" measurement is the width of the brake shoes. | Weird questions: is 10inch...

With max payload, total weight will be no more than 1200lb Have 2020 Ford ranger so want to use same bolt pattern 6x139.7mm 6x5.5in Looking for axle-less with electric brakes and controller, to fit 17 or 18 inch wheels probably all terrain tires - mostly paved and a little light forest trail usage |

The RoadActive Suspension Custom Leaf Spring Enhancement Kit part # RAS2516 which is a fit for a 2011 Ford Ranger will take place of any other suspension enhancement system. | 2011 Ford Ranger XLT 2WD, 4.0 V6, w/ ARE fiberglass...

This Axle-Less system will provide your trailer with a smooth, quiet ride and can eliminate the need for a standard axle. They are designed to fit any frame width and this particular system features a 3,500 pound capacity and a 4 inch spindle lift for increased ground clearance. |

Your new hub/drum assemblies will need to use the same bearing set as the current hubs; this is essential to ensure that the new hubs will fit your spindles. You'll need to obtain your inner and outer bearing numbers from your trailer. |

can you recommend an axle that will fit the size of my frame? I would also like to add brakes to the axle. | Hello, I am fabrication a trailer that is 60 inches wide. Its a 5x10. I am planning on mounting 15 inch tires....

I noticed that someone else asked this question on the page for the AKHD-655-6-G-EZ-K assembly and the reply said it wouldnt fit and said they included a link to find the correct hub but the link only went to the replacement bearing for the LM67048. |

If you determine the magnets are bad and must be replaced, you can use part # BP01-225. This magnet fits 12-inch Dexter brake assemblies for 6,000 lb axles. | Hi there, Ive got a tandem flatdeck trailer with Dexter brake assemblies...