Trailer Coupler Will Not Release Hitch Ball Even After Lubrication
I just went and got another pop up trailer b/c I needed two. Just got home and cannot get it off the ball. I tried cranking it and releasing the latch at the same time but as I crank, it is lifting the back end of the car along with the coupler....
Replacing Warner 12 Inch Electric Brakes & 6 Bolt Mounting Flange
Since no 12 x 2 Warner electric brake parts are available I removed the Warner electric backing plate assembly from my 1960 Yellowstone travel trailer and it has a 6 bolt pattern for attaching the plate assembly. The lug pattern on the drum...
Can Replacement Parts Still Be Had for Atwood Hydraulic Braking Assemblies 84210
Looking for a direct replacement for Atwood 84210 wheel cylinder kit. Can you point me in the right direction? I found one set, the real thing - exactly what I have, but need another pair. | The Atwood Hydraulic Braking Assemblies 84210 are...
Parts Needed for 2005 Ford Ranger to Tow Trailer with Electric Brakes
I have a 2005 Ford Ranger that has trailer wiring for a flat 4 plug. I have a trailer that has brakes, and the round style plug that I want to tow. I know that I will need a trailer brake controller and a plug for the back. I was looking at...
Recommended Trailer Hitch Receiver And Wiring For 2005 Ford Ranger
Im interested in this model for application on a 2005 Ford Ranger, 4cylinder, 2.3L, 2 door, rear wheel drive, short bed. Its the most basic of basic models. Need the 2 inch receiver for Thule bike rack. A few questions: 1 Will installation of...
What is the Amp Draw for the Various Settings on the MaxxAir MaxxFan # MA00A04401K
How many amps will this fan draw on its different settings? | The MaxxAir MaxxFan # MA00A04401K that you asked about has a maximum draw of 4-1/4 amps when it is set at it's highest setting. Since this is a 4 speed fan it will decrease about...
Information Needed to Choose the Correct Replacement Hub for a Trailer
I have a 2005 Ranger 185DVS and ranger trail single axle trailer. It has disc brake and I need a complete hub assembly. Ranger gave me a part # of 9606003R1. Do you have this part available. I have oil hubs now, I think this part #is for grease...
BAKFlip G2 Hard Tonneau Cover Compatibility With Bed Rail Caps On A 2005 Ford Ranger Regular Cab STX
Is it possible to retain the bedside caps or would I have to remove them? Do you see a way they could be modified to fit with the Backflip? | The BAKFlip G2 Hard Tonneau Cover # BAK26305 is going to sit partially over the bed rails so the caps...
Recommended Replacement Tarps for a TruXedo Tonneau Cover for a 2005 Ford Ranger
Hi, I need a replacement tarp for a 2005 ford ranger xlt extended cap tonneau cover, if you could help me out with the right one that would be great. | We do have plenty of replacements available for your '05 Ford Ranger, however without knowing...
Does the etrailer Hitch item # e29AR Work w/ a Full Size Spare Tire on a 2005 Ford Ranger?
Will this hitch fit with a full size spare stored under the bed? | Yes, it will. The etrailer Hitch item # e29AR will allow you to store a full sized spare tire beneath your 2005 Ford Ranger. This hitch is custom fit and bolts to your Ranger...
Is CE Smith 1.8K Trailer Axle Available with Brake Flange
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2inch Long - 1.8K - Can I get this axle with brake flanges? | Hey Charlie, thanks for reaching out! The axles we have on our site, like the CE Smith Trailer Axle Beam with...
Difference in the Timbren 3,000-Lb System and the 1,000-Lb System on 2005 Ford Ranger
What is the difference between the 3000 lb and 1000 lb system? Is the 3000 lbs the weight the system handles before it starts to rely on the stock suspension? I have a 3800 lb camper I tow and Im looking to eliminate the sag in the rear end...
My Trailer Lights are Very Dim what Could be the Issue
I have a tent trailer that has worked great for years. This year I have a lighting issue. When my running lights are off my signals work great but break lights are very dim and running lights come on dim as well. When running lights are on...
Tailgate Lock Recommendation for 2005 Ford Ranger XL with Power Locks but No Key FOB
My Ranger has power door locks, but not a remote-key fob. Can I still operate this power lock without a remote? | For your 2005 Ford Ranger that has power door locks you would actually want the Pop and Lock Tailgate Lock part # PAL8200 and not...
Is the Base of the Pacer Performance Hi-Five LED Truck Cab Light Kit Flat
Are the base of these lights Flat ? Thanks | In regards to the Pacer Performance Hi-Five LED Truck Cab Light Kit part # PP42FR, the light bases are designed to conform and seal to flat or curved surfaces like a roof. The base with gasket is...
Adapter For Falcon 2 Tow Bar And A Blue Ox Base Plate
Do you have the adapter plates for a falcon 2 or a blue ox tow brand how much are they | Hello James, we do offer an adapter for the Falcon 2 and a Blue Ox Base plate. For that you can use the Roadmaster Tow Bar Adapter Brackets for Blue Ox...
Programmer for 2005 Ford Ranger 4.0 Liter with Cold Air Intake and Aftermarket Exhaust
Good morning, I have read that different tuners offer different options for different vehicles. I own a 2005 Ford ranger fx4 4 litre engine. I have a body lift and 33inch tires. I have found the transmission shifts very sloppy. I am looking...
Trailer Hitch Fit For 2005 Ford Ranger With Flairside Bed
will the #70181 fit a Ford Ranger Flair side. have tried other that fit ford ranger but not Flairside. | The Draw-Tite Max-Frame Trailer Hitch, part # 75082 is a fit for your 2005 Ford Ranger. I checked the fit guide and this hitch will work...
Replacement Range Hood Exterior Vent
I have a Pioneer camper which has a smaller range vent opening. 21/2 X 61/2 opening. Do you have the smaller size vent cover? | We have several RV range hood exterior wall vents but they all need a 10-1/2 x 3-3/4 inch opening like # V2111-03....
Is Trimming Needed When Installing Front-Mount Trailer Hitch On 2005 Ford Ranger XLT
Does the front air dam need to be cut/modified using the draw tite front mount hinge? Also are there any things i would need to know if putting on a 2005 four wheel drive Ranger XLT? Are there any special things I should know? | I checked...
Replacement Tarp for 2005 Ford Ranger with Extang BlackMax Tonneau Cover
Looking to buy a REPLACEMENT TARP FOR MY EXTANG BLACK MAX, It is a Ford Ranger 2005 extended cab. | The correct Extang BlackMax replacement tarp would be the part # EX1630 if your model was # EX2630 have a 6 foot long bed on your 2005 ford Ranger...
Replacement Velcro Solution For A 2005 Ford Ranger With A Tonno Pro Tonneau Cover
Velcro for 05 Ford ranger tonneau pro # LR3005 | While we do not carry the Tonno Pro brand of tonneau covers, I do still have a potential solution for you. Check out the: -Replacement TruXedo Shur-Bond Velcro Brand Fastener # TX1115174. This...
Replacement Tarp for TruXedo Lo Pro QT on a 2005 Ford Ranger 6 Foot Bed Non-Stepside
I am looking for a replacement tonnau cover for my 2005 Ford Ranger XLT with 6 foot bed no side step. It has a tuxedo on it now but cover is worn and detached from the velcro. I was told it is a Tuxedo LoPro QT. The only part number or ID...
What Hitch Is Available to Fit A 2005 Or 2006 Volkswagen Rabbit
Will this hitch fit a 2005 VW Rabbit? If Not do you make one? Or what is the difference between 05/06? | The new body style VW Rabbit was introduced to the US as a 2006 model. I do not have a listing for a 2005 VW Rabbit, just a Golf. You...
Filter Your Search
Contact and Help