bing tracking image

Ranchero  x   >   Rdx  x   >   Rabbit  x   >   300C  x   >  

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Recommended Ball Mount for Curt Trailer Hitch on a 2018 Chrysler 300

What ball mount do I need to use with my Curt 13236 hitch installed on my 2018 Chrysler 300? | Based on our research the top of the inside of the Curt Trailer Hitch # C13236 is going to be about 11-3/4" off of the ground when installed on your...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Baby Moon Cover for Dexstar Conventional Trailer Wheel AM20514

Do you sale babymoon or any other hub caps that fit your 15 6 lug conventional dexter wheels. | Yes we have the baby moon covers # AM981306 that fits the 15 inch conventional trailer wheels part # AM20514 that you referenced. |

Recommended Trailer Hitch Receiver for a 2006 Chrysler 300C SRT8

Hi, Im wondering what kind of a trailer hitch I should get for my Chrysler 300c SRT8. If you could send me the link to the right trailer hitch, that would be great. Thank you. Best regards | For your 2006 Chrysler 300C SRT8, I recommend...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Dimensional Drawing for Curt Hitch 13465

Are you able to provide the same sort of dimentioned diagram for the Curt #13465 2inch trailer hitch as was supplied to this other poste I really need to check some of the overal depth and height measurements of the mounting arms in relation...

Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch

Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

Adding an Anti-Rattle Device to Replacement Swagman Bike Rack Shank for 2 Inch Trailer Hitches

Hi, Will part # P5901 and part #P313 work in partt # P249 so I can achive an Anti-Rattle fit? | The threaded pin, # P5901, will only fit Swagman racks that have a 2 inch shank. The anti-rattle insert fits in a 1-1/4 inch shank. So these parts...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Trailer Hitch Recommendation for 2006 Chrysler 300C SRT

My 2006 Chrysler 300C is an SRT is there any difference from standard 300 Thanks | The Draw Tite hitch part # 76145 that you referenced is a confirmed fit for your 2006 Chrysler 300C SRT and would work well. I attached an install video for...

Recommended Trailer Hitch Receiver For A 1974 Ford Ranchero

Hi, Im interested in a tow hitch for a 1974 Ford Ranchero. Can you tell me if you make one and what the product number is? Many thanks, Lock | Unfortunately we do not have a trailer hitch confirmed to fit a 1974 Ford Ranchero so you would have...

Roof Rack Recommendation for a 2009 Volkswagen Rabbit 3-Door Hatchback

Will the Sport Rack SR1010 fit my VW Rabbit 3 Door? | The SportRack roof rack # SR1010 is not listed as a fit for the 2009 Volkswagen Rabbit 3-door but we do have several roof racks that will fit. I have included a link to them for you. The...

Hitch and Bike Rack Recommendation for a 2009 Volkswagen Rabbit

Hello Looking for bike rack. Drive 2009 VW rabbit. Want simple rack, easy use, no scratch car, two adult bikes 1 womens. Thinking of getting hitch. Sort of new to biking. Dont want to spend a ton of money, but also dont want to worry about...

Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit

Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...

Best Hitch Option for 2006 Chrysler 300C to Allow Use of Hitch-Mounted Motorcycle Carrier

I have an 06 300c SRT8 and was wondering which hitch is the best for my and car and which one could i apply a motorcyle carrier onto. Im going on vacation and would like to take it with me. | In order to use a hitch-mount motorcycle carrier...

Will a Roof Rack from a 2015 Volkswagen Golf Fit a 2008 Volkswagen Rabbit

Im looking to buy a second-hand roof rack for a good price for my 2008 VW Rabbit. The rack Im looking at is a craigslist ad for a 2015 VW Golf. Would this rack be compatible with my rabbit? | The 2008 VW Rabbit and the 2015 VW Golf do not use...

Roof Rack for 2007 Volkswagen Rabbit

I have a 2007 VW Rabbit 2door, and need new Yakima Q clips. Ive seen different requirements on different sites. Some say all 4 Q102 clips and others say half should be Q102, and the other half another kind of clip forgot which one. I Just want...

Why Does Curt Require a Stabilizer Strap But Other Hitch Companies Dont

Why does the Curt hitch require a strap but Draw Tite and Hidden Hitch do not?Is the Curt weaker or less stable? | Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps...

Will Trailer Wiring Ruin the Paint Finish on a Chrysler 300C When Routed Out of the Trunk for Towing

Just wondering if the wires are stored in the trunk and pulled out for towing will the wires rubbing on the paint scratch and ruin the finish. I have a 300c that I put a hitch on and the installers left the wiring in the trunk. I feel like...

Filter Your Search