Result:

SWAY BARS: Regarding the hitch mounted ball for the sway bar, is the frame that the ball is mounted to an welded integral part of the trailer hitch or is this frame mounted under the main 2 ball? | Hey Larry! The Reese Friction Sway Control...

02 v10 excursion stock factory ones are 3 in. long are these longer if not I do not seeing them making a diff. I think air bags would be better? pull enclosed trailer | The Timbren Rear Suspension Enhancement # TFREXC4 for your 2002 Ford Excursion...

I am looking at using an extended ball mount with added sway control to clear a spare tire carrier bumper. I will be hauling a 22’ tandem axle RV with 455lbs of empty tongue weight 600+/- loaded and a dry weight of 4,300lbs GVWR 7,400. My tow...

Can the hitch bar on a Reese weight distributing hitch be turned up side down to adjust the height of the ball from the ground to ensure level towing of a travel trailer? | As long as your particular weight distribution shank is not specified...

I need a replacement 7 blade factory tow package wiring harness for a Ford Excursion. The 118243 looks correct, but says it does not fit my excursion. I have the 7 blade connector now, but the wiring harness behind it is broken. I am holding...

I have a 2005 Ford Excursion with the 6.0, everything on the vehicle is stock. I am pulling a 9,000lb 37’ travel trailer with the husky round bar Weight Distribution Hitch with Bolt-Together Ball Mount/Shank Assembly and Sway Control only 1...

I currently use the Reese 54970 with my Reese 66021 WD Hitch. I upgraded my trailer and now need to upgrade my hitch. I need a solid shank for my new Draw-Tite 7979-1 double tab hitch head which requires a solid shank. Both the shanks are same...

Cannot seem to get a straight answer from the dealer where we got the Ford, nor the dealer where we just purchased a 2015 Prowler Lynx 30 LX. Specifications on the trailer are as follows: Dry 6,720 lb Hitch 880 lb The excursion is supposed...

Hello, Is the Reese Steadi-Flex 14k as good as it looks? I cannot seem to find many reviews of anyone that is actually using it other than the one review on your site. I am wondering if the Equalizer 4 point offers any benefits over the...

Hello - Im interested in this product: Strait-Line Weight Distribution w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW Item # RP66074 for my 2018 Jayco Octane SL 272. Will it fit the a-frame of my trailer? If so, will I need...

I have a 2004 Isuzu Rodeo with a swing out rear door. I have 8-1/2 from the top of my receiver hitch to the bottom edge of my rear door and want to confirm that when opened, it will clear the top edge of the carrier while in the down position....

Will part 118243 work on a 2001 Excursion? Thanks. | Your 2001 Ford Excursion should have a factory 7-way installed on it, but if you needed a replacement that would match up to the round connector of the vehicle you would want the part # 74682...

I have a 2002 excursion 7.3 diesel. Purchasing a 2015 Open Range LT272RLS 10400 full weight. 7900 dry. What distribution system would be best? Trailer is 35 feet bumper through hitch. 100inch wide. | The first step would be to determine the...

I have a 2005 Ford Excursion 4X4 Diesel. It weighs 8,500lbs with a full tank, people and gear. GVWR on the door states 9200lbs. Max trailer is 11,000lbs and the GCWR is 20,000lbs. Using a Weight Distribution hitch, Can I tow a trailer that...

There is confusion on which vehicle this trailer wiring is for in the description it mentions Chevy Silverado and Ford Excursion further in the reviews I read multiple different makes and models that were referred to. I have a 2005 Ford Excursion,...

I need to know if this will fit a 2002 Ford Excursion? | There are replacements for the factory 7-way on your 2002 Ford Excursion but part # 118243 will not fit. Instead I recommend the Reese Multi-Plug Wiring Harness for Factory Tow Package...

I have two trailers I would like to mount the sway controller on. Is it possible to buy an additional mounting plate and accessories, so I dont have to buy two complete controllers? I can only tow one at a time! Thanks for the excellent customer...

Instructions for RP66074 | There are 2 instructions links for the Reese Strait-Line Weight Distribution system, # RP66074. I have included updated links to the instructions for you to view. One is for the weight distribution system itself....

Hi, Does this hitch have a 1200 lb tongue wt capacity without using a weight distribution hitch set up? My factory hitch has a 500 TW and 10000 wt with weight distribution hitch and my boat trailer has close to a 900 TW. Thanks | The maximum...

I am needing a wd hitch with sway control. I will be towing a travel trailer between 5k and 6k lbs empty and behind that a pwc trailer right at 2k lbs max. My tow vehicle is a Ford Excursion 7.3l 4wd. Sometimes we will tow both, other times...

Will this work on 2000 ford excursion 6.8? Number on part #13A576-TC3T. Can you locate the wiring harness that will work thank you ? | Sounds like your 2000 Ford Excursion has a factory 7-way installed on it currently. All you would need to...

I have a 2001 Ford Excursion 7.3l SD Diesel, 4WD Stock height, I am looking at air bags for both the front and rear. Will the Reese system work with air bags? We tow a lot in the mountains. I want a weight distribution hitch with sway control....

I currently have the following Reese WD Hitch: Strait-Line Weight Distribution System w Sway Control - 12,000 lbs GTW, 1,200 lbs TW - Code: RP66084. I have also upgrade my truck to Ford F350 with a Class V receiver, so that means my 2x2inch...

will these work with a reese 12000 dist bar set up? my bars look like they have two different sizes bolts hole per bar? | Replacement weight distribution hardware kit # 66014 fits Reese and Draw-Tite systems that have spring bars that hang from...