bing tracking image

R350  x   >   Raptor  x   >   Rabbit  x   >   Bronco II  x   >  

Converter Wiring Harness Needed For A Third Brake On A 1990 Ford Bronco II

I have a 1990 Ford Bronco2 I want to add a third brake light . My brake and turn signals are on the same wire. The light Im using just has a hot and ground wire. Do you have anything that will work? | Hey Keith, You could use the Vehicle to...

Necessary Parts To Flat Tow A 1989 Ford Bronco !!

I plan on towing a 1989 Bronco II behind my motor home or F-350 with a truck camper. What products would I need to safely and legally tow throughout the United States and Canada? | If your 1989 Ford Bronco II has a manual transfer case, you...

Crossbar Kit Recommendation to Fit with Retrax XR Tonneau Cover on a 2022 Ford Raptor

Hi I have a truck 2022 Ford Raptor with retrax XR tonneau cover with rails compatible with T-slot accessories. Can you please recommend cross bars that would work with the rails on the retrax xr tonneau cover? Thank you | Hey Bora, thanks...

Brake Controller Option For A 1987 Ford Bronco II With A 7-Way Recently Installed

I own a 1987 bronco ii. I recently added a hopkins 7 pin trailer hook up and am looking to add brake controller. Could you please suggest a product and wiring solution for my application. My trailer is a double axle car hauler which has brakes...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Can Duncan EAZ Aligner Tow Bar be Used with Roadmaster Base Plate on 1985 Ford Bronco II

A couple of questions: 1 first time towing a toad, bought a 1985 Ford Bronco II, it has a Duncan eaz Aligner Tow Bar, I assume 1985 vintage, is it still safe to use, seems to still be functional? 2 is Duncan still in business, I live in...

Length of DeeZee Nerf Bars # DZ3700301

What is the length from end to end? | The steel tubing of the DeeZee Nerf Bars # DZ3700301 is 32 inches long. They're designed to mount under the front doors only. |

Trailer Hitch and Wiring Recommendation for a 2006 Mercedes R350

I am trying to find a hitch AND a wiring harness for our camper to be towed by our 2006 Mercedes R350. I found a hitch on your site but I dont know what is needed for wiring as the 2006 R-Class did not come with camper wiring pre-installed....

Can Detail K2 Rampage II Plow be Used with 1988 Ford Bronco II

Will this fit a 1988 bronco2 4x4 and what mounting bracket would be needed. Thanks | Yes, you can use the Detail K2 Rampage II Snow Plow part # K2RAMP8219 on your 1988 Ford Bronco II with the correct custom install bracket kit part # K281100. |

Parts Needed to Flat Tow a 1990 Ford Bronco II

lowest cost to hookup tow bar to Bronco II 1990 | You will need to check your owners manual or with the Ford dealer to see if your 1990 Ford Bronco II can be flat towed. Some vehicles must be equipped with a transmission lube pump, an axle disconnect,...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch

Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit

Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...

Spare Tire Cover for P205/75-15 Tire on 1989 Ford Bronco II

I need a spare tire cover for a 1989 bronco11 | According to my research, the 1989 Bronco II used P205/75-15 tires as the stock tire size. If this is the size of your spare tire, and my arithmetic is correct your tire is 27 inches in diameter....

Roof Rack Recommendation for a 2009 Volkswagen Rabbit 3-Door Hatchback

Will the Sport Rack SR1010 fit my VW Rabbit 3 Door? | The SportRack roof rack # SR1010 is not listed as a fit for the 2009 Volkswagen Rabbit 3-door but we do have several roof racks that will fit. I have included a link to them for you. The...

Fit and Compatibility of Roadmaster Classic Base Plate Kit for 1985 Ford Bronco II and Falcon 5250

will this faceplate work with a falcon model 5250 tow bar assy. | Great news! The Falcon 5250 is compatible with the Classic also known as Standard Baseplates # 410-1 for your 1985 Ford Bronco II. The tow bar assembly should have the Quick...

Hitch and Bike Rack Recommendation for a 2009 Volkswagen Rabbit

Hello Looking for bike rack. Drive 2009 VW rabbit. Want simple rack, easy use, no scratch car, two adult bikes 1 womens. Thinking of getting hitch. Sort of new to biking. Dont want to spend a ton of money, but also dont want to worry about...

Recommended Spare Tire Cover for a 1990 Ford Bronco II

Hi, Im looking for a new spare tire cover for my 1990 Ford Bronco ll. My tire size is P225/75R 15. The tire measures about 29 inches in diameter. I would prefer a heavy black vinyl with a soft liner inside and an adjustable draw string to hold...

Filter Your Search