If Truck Uses Timbren Rear Suspension do They Have to Use Front Timbrens Too
Do you need the front suspension kit when using the rear suspension kit? | You do not have to use a front Timbren kit when installing a rear kit like the part # TDR1500DQ on your 2012 Ram 1500. In nearly all situations where we sell Timbrens...
Recommended 5 on 5 1/2" Hub Assembly For Timbren Axle-Less Trailer Suspension System
Hi I am planning to build an off road capable camping trailer. In doing some research im thinking that your ASR3500SO6 seems to be what I am looking for. What my delema is the bolt pattern for the trailer says 5 on 4.5. I want to run the exact...
Recommended 1" Spacer For Timbren TABSOSR On A 2012 Nissan Frontier With 1.5" Lift
I have a 2012 Nissan Frontier 2WD SV and I am planning to buy the Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs - TABSOSR My truck as a 1.5 of lift, and I am planning to add an spacer, What is the correct part number for...
Recommendations For Replacing An Axle With A 91 Inch Hub Face Measurement
My axles is 91 hub face to hub face. Center spring is 76 Do you have a axles like this, Also maybe w/electric brake Thanks | Though I do have another option available, the axles we currently have will not match your specifications, unfortunately. With...
Suspension Enhancement Product for 2015 Chevy Tahoe
What do you have to add 1500 lbs of support to rear suspension of 2015 GM Tahoe/Yukon? | It sounds like you're needing a suspension enhancement product. I'd recommend the Timbren Aeon spring system, part # TGMRYS4. The springs have a 6000 lb...
Timbren Suspension Enhancement Recommendation for a 2014 Ford F-250
My 2014 F-250 CC SB 2WD calls for the SDG kit on both your site and Timbren site. However, when I measure the actual distance between my truck frame at mounting site and axle, it is about 8.5inch unloaded. The recommended SDG kit is 6.5inch...
Suspension Enhancement that Could Fit 2019 Dodge Ram 1500 Rebel
I would like to purchase the Timbren Rear suspension system or sumcoils but I do not know if my Dodge Ram 1500 Rebel addition suspension is different than the standard Ram 1500. I think the ride height may be different. | In 2019 air suspension...
Upgrading from D35 Dexter 3,500 Lb Axle to 5,200 Lb Timbren Axle-Less Suspension
Hello, This may be overkill, but I’m very interested in upgrading the Dexter D35 3500# Axle my camper trailer came with. It has a front deck for ATV hauling, but the trailer is limited by my axle. I’d love to have the Timbren Axle-less 5200...
Timbren Silent Ride System for 2017 Stealth Forest River Toy Hauler FQ2817G
I have a 2017 Stealth Forest River Toy Hauler, FQ2817G. GVWR is 12,100 pounds, dry weight 7945 pounds, two axle, drum brakes, that is 35foot OAL. I average about 10,000 miles per year. The toy weighs approximately 1100 pounds and on occasion,...
Axle Replacement For Tracker Trailstar Trailer
Hi - I have a 2003 Tandem Axle Tracker Trailstar trailer and I am trying to find a replacement axle. The dimensions are the following 84inch Hub distance, 72inch Spring distance, and 89inch overall distance. | It sounds like you have a different...
Timbren Axle-Less Trailer Suspension Suspension Deflection
If the A4RS440 is fully loaded at 400 lbs what is the deflection? Is the spindle height still 2 1/2”? I’m building a trailer I expect when fully loaded to be about 500 lbs. It seems like your 1200 axle option is oversized for my trailer. Please...
Which Timbren Kit for 2017 Ram 1500 Towing Trailer with 660 lbs Tongue Weight
I have a 2017 Ram Crew Cab 4x4. I am towing a travel trailer 7600 capacity / 6300 unloaded, 660 tongue weight I believe it to be more, and I am using a a 10k lbs Fastway e2 weight distribution sway control hitch. I drive the trailer near...
Is the Timbren Suspension Enhancement System # TURMDH the Same as Timbren Part URMDH
Hi, We have an Isuzu NPR-HD 2021 truck and were looking to order a Timbren SES system. The Timbren website says the part # URMDH will fit. We noticed you have a part # TURMDH. Is this the same thing? Thanks in advance | You are correct, the...
Suspension Enhancement Recommendation with Better Ride Quality than Timbren on 1999 Dodge Ram 3500
Hi Folks, upon the recommendation of an installer I purchase a set of Timbren tdrtt3500 for my 99 Dodge 3500 truck with flatbed as the flatbed installer did not install it to the correct height. If I put 1 ton of materials on the flatbed it...
SumoSprings Versus Timbren Suspension Enhancement For a 2000 National RV Tropi-Cal 6350 Motorhome
2000 tropi-cal motorhome ford chassis 3FCNF53SIYJXXXXXX model 6350. What the best route Timbren or Sumo Springs I seen some run Sumo in the front Timbren on the back? | I prefer using SumoSprings Rebel Custom Helper Springs # SSF-172-40-2 for...
Recommended Timbren Axle-Less Trailer Suspension System with 4" Lift Spindle and 5 on 5-1/2" Hubs
I am purchasing ASR35HDS02 and need spindles to go with them. I would like 5x5.5 lug pattern. Do you have compatible spindles for what I want? | The only Timbren Axle-Less Trailer Suspension System with 4" Lift Spindle we offer compatible with...
Height Of Timbren Rear Suspension System # T94VR For A 2021 Ram 3500
I am looking for the exact height of this product. Timbren suspension enhancement system severe service rear axle. 2021 Ram 3500 cab and chassis. | Per Timbren The Suspension Enhancement System # T94VR comes with a 1 inch spacer, so with the...
Spacer For Suspension Enhancement For Lifted 2015 Toyota 4Runner
hello, I have a 2015 Toyota 4Runner with a 1.75 lift in the rear, 3 in the front so its level now. I will be hauling a 12 ft aluminum trailer with 2 motorcycles with a total weight of around 3500 lbs. I see the kits you have don't offer what...
Is a Brake Controller Needed to Activate Brakes in the Timbren Axle-Less System part # A35RS545E
Im building a trailer and I would like to use A35RS545E. My truck is a 2011 chevy 1500. Will the brakes work with the 7 pin connector or do I need a separate controller. Tks | To activate the trailer brakes that are included with the Timbren...
Timbren Rear Suspension Enhancement Springs for 2004 Ford Excursion With F350 Leaf Springs
My excursion has f350 leafs on it which gave me 2.75inch of lift. Will the excursion kit still work or will the bushings be too short still causing it to sag before they make contact. | Because the stock ride height has changed, the # TFREXC4...
Comparing Timbren SES to SuperSprings Sumo Spring Solo Custom Helper Springs for 2017 Nissan Titan
Trying to decide which is the better product for my Nissan 2017 Titan SL 4wd in which I pull a 24foot Dual axle Travel Trailer with an equalizer sway control hitch for added support, Timbren TNRTTN vs Sumo Springs SS95GR. Any recommendations,...
How To Fix 1" Gap After Installing Timbrens On a 2000 Ford F-250
I just installed this part on 2000 F250. There a large gap between the unit and the axle. Timbren says on a heavy truck like mine there should be little to no gap. I have over an inch. Kind of defeats the whole purpose of the intall. | The Timbren...
Recommended Suspension Enhancement for 2011 Ford F-250 Towing Toy Hauler with Weight Distribution
My truck still sags in the back when I load up my 26foot toy hauler even after I hook up the equalizer hitch. What else can I use to level out my load? I have the heavy duty model hitch but cant seem to be able to adjust so it doesnt sag. Thoughts?...
Capacity of Timbren ASR1THDS02 Axle-Less Trailer Suspension System
Are these rated 1100lbs each for a total of 2200lbs? Thx | That's absolutely correct. The combined capacity of the two units included with part # ASR1THDS02 is 2200 lbs. I've linked you to a product demonstration video. |
Filter Your Search
Contact and Help