Trailer Hitch Receiver Fit For 1965 Ford F-250 With Custom Bumper
I have a 65 Ford F250 2WD truck with a unique rear bumper customized by the original owners. I need to see if you have a hitch that would work with this. | Outstanding photos thank you so much for sending them, and based on that we do have...
Radiator and Transmission Fittings for a 1973 Ford F-100 with a Champion Radiator
Wonder if you could advise the correct cooler line fitting I need... Brand new Champion rad. They told me fitting bore is 1/4 27 NPT. The other end to tranny seems to be the same thread size but is a flare end. Do you have this fitting? 73 F100...
Recommended Toolbox For A 1979 Ford F-150 With A Pace Edwards Full-Metal Jackrabbit Tonneau Cover
Just looking for tool box options that fit. | The average bedrail height for Ford F-150's is approximately 21", so going off of that measurement and allowing for your Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover # 311-FEF1290...
Hitch Recommendation for a 1976 Ford F150 with a Deep Drop Bumper
what is a roll pan bumper? I have sent a photo of mine. is this a bumper. it doesnt measure 10 inches. | A roll pan bumper is a bumper that basically makes the rear bumper look as if it does not stick out further than the rest of the truck...
Recommended Universal Truck Bed Mat for a 8 Foot Bed
I have a 1964 ford F100 stileside 8 foot bed. You have a bed mat that fits? Thanks! | We have a universal mat that should fit the bed of your 1964 F-100 since you have the 8' bed. It is the DeeZee Universal Utility Mat for Trucks and Trailers...
Recommended Truck Bed Mat For A 1966 Ford F-100
Do you carry bed mats for a 1966 F100 long bed | While we don't carry any custom-fit options for a 1966 Ford F-100 we do offer universal-fit options like the DeeZee Universal Utility Mat for Trucks and Trailers # DZ85005. DeeZee also offers...
Westin Fey Diamondstep Bumper that Fits 1979 Ford F-150
I have a 1979 Ford F150. I need a Westin Fey diamond step bumper part number 71000. What installation kit do I need and do you have the bumper in stock for immediate shipping? | Westin has a Fey bumper and hardware kit that fits your 1979...
Replacement Roof Vent Lid Recommendation for 1993 Lance Squire 4000
Trying to get a vent lid for our 1993 Lance Squire 4000 9foot 4. Its looks to be the 14x14 but the hinge pins everyone sells opposite of what I have. The hinges on mine are small, large, large center small, large. Most I see are for four...
Replacement Rear Step Bumper For 1982 Ford F100 Pickup Truck
Do you have a rear chrome stepbumper for a 1982 Ford F100 Flareside. They are different than a styleside. Thank you | I checked with our vendor Westin and confirmed that the only rear bumpers available for a 1982 Ford F100 are the ones listed...
Will the Westin Fey Diamondstep Bumper # 73000 Fit My 1977 Ford F-250?
will this fit my 1977 ford f250 | I have a solution for you. Unfortunately, the Westin Fey Diamondstep # 73000 will not fit your 1977 Ford F-250. However, for the correct bumper and mounting hardware, you need the Westin Fey Diamondstep Rear...
Recommended Trailer Hitch Receiver for 1965 Ford F100
I have a 1965 ford f100 p/u it is a step-side with the plain straight bumper. Which hitch do I need? Thanks | For your 1965 Ford F100, I recommend the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41001. This hitch receiver is a 2 inch Class...
Will Curt Trailer Hitch Receiver for 1977 Ford F-250 Work with 38 Gallon Tank
Will this fit my 77 Ford F250 2wd, 37inch frame with the replacement 38 gal gas tank? Although it looks like there would be plenty of room based on your customer pics for a 77 F150, the replacement of the original 19 gal tank required the...
Troubleshooting Turn Signals Blinking Rapidly With Trailer Connected to a 1983 Ford F-150
Hi, Im stumped on this one. I have a 4 way flat wired to my truck, 1983 F-150. The brake lights work. The running lights work. However, the turn signals with a trailer hooked up, it acts as if a bulb is burned out. It will blink, but extremely...
Hitch, Brake Controller and 7-Way Trailer Connector for 1966 Ford F-250
Hello, Im needing recommendations for adding brake controller and hitch to 1966 Ford F250, Im going to be towing a 2-horse trailer that weighs 3200 lbs and tongue weight 200. It currently has 7 pin on it that is frayed and I need to replace...
Installation of Draw-Tite Hitch Receiver # 37130 on 1976 Ford F-150
how much is do you torque the bolts on hitch #37130 | I've attached the installation instructions for the Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" # 37130. You will first torque the 1/2" nuts to 70 ft•lbs. Then torque the...
Installation of 4-Pole Wiring Harness on 1998 Ford F-150
NEED TO SEE WHERE WIRES CONNECT TO VEHICLE. | On the 1988 Ford F-150 the brake and turn signal lights are already converted, so a converter is not required. For your F-150 vehicle, instead of the Hopkins Vehicle Wiring Converter, part # HM48915...
Replacement Trailer Hitch Receiver Hardware
Can I reuse trailer hitch bolts? I just bought a hitch from you guys and installed it a few weeks ago. I need to take it off to get to something. I haven’t towed anything yet but they are torqued down. | You cannot reuse hardware for a trailer...
Can a Proportional Brake Controller be Used on a 1971 Ford F-250?
I am wondering if this unit has the inertia components that would be necessary to install it on a vehicle that does not have any computer or electronic braking components. I have a 2016 fifth wheel that has electric brakes and Id like to be...
Can The Air Lift SlamAir Air Helper Springs # AL59106BT Accommodate A 3" Wide Leaf Spring
Does that bracket for the bag only work on a 2.5 inch wide spring? or will it work for a 3 inch wide spring? | The bottom bracket of the Air Lift SlamAir Air Helper Springs for Lowered Trucks # AL59106BT has approximately 3-1/8" of space so...
How To Convert Vacuum Over Hydraulic Trailer Brakes to Electric Over Hydraulic Trailer Brakes
Hello there. I am currently running a vacuum over hydraulic brake setup on a 1977 F350 and gooseneck. I have just updated to a 2015 Dual Cab Iveco Daily which has an electric brake system already installed by the previous owner. On the gooseneck/...
Where Does the 1/2" Bracket Strap on Firestone Air Bags for 1965 Ford F-350 Go
I have a 1999 7.3 f350 with 1 overload spring. Does the lower mount ,using the 7inch bolt , mont to the overload spring or the whole spring pack? It says both ways. | In regards to the Firestone Ride-Rite Air Helper Springs part # F2071 on a...
Fifth Wheel Rail Kit for 1968 Ford F-250 for Curt Slider Hitch
Im looking for a installation kit complete everything I need to mount a Curt Q20/ slider fifth wheel attachment to my 1968 ford f250 | You'd need to use a universal fifth wheel rail kit like the Reese # RP30035 to install a Curt Q20 slider...
Troubleshooting Lighting Problems on a 1974 Ford Truck
The install went perfect but on my 74 Ford Truck when I press the brake the turn signal stops. and when the head lights are on the turn signals wont work. What can I do? | I recommend checking the grounding wire on the Hopkins Plug-In Simple...
How To Transfer Old B&W Companion Hitch to New Ford Super Duty with Factory Tow Prep Package
Will my BandW companion non puck work in my new f350 with the gooseneck/5th wheel prep puck system? | What I think you are stating is that you currently have the B&W Companion 5th Wheel Trailer Hitch, # BWRVK3500-5W that mounts to the above...
Filter Your Search
Contact and Help