!Wildcat Maxx Travel Trailer  x   >   !Comet Camper  x   >   Lock N Roll  x   >  

Do you sell just the pin clip for the Lock N Roll pin? I was offroading when I bottomed out and lost the clip. It is a unique style that I cant find anywhere else. | I may have a solution for you, but there is not a replacement clip for this...

Can I use a locking hitch pin in place of one of the bolts on the 3 position channel? | According to Lock N Roll, their # 336TS508 articulating trailer coupler is meant to be bolted or welded into place. They don't recommend using a locking...

Just received this. What is the recommended torque for securing the bolts when attaching the hitch roll portion to the riser? Should lock-tight be used? Thanks... | The amount of torque you need to use when tightening the bolts of the Lock...

How often do you have to grease the low profile fitting on the hitch and what type of grease do you use? | There isn't an exact schedule for how often to grease the Lock N Roll Articulating Hitch # 336VS503 through it's low profile grease fitting...

Hi, I’m looking for a swing away hitch adapter for my bike rack 2 ebikes which I can also pull my boat ? Thanks | Hey Kevin, Swing-away hitch adapters can't be used to tow and aren't designed to be used with other hitch adapters so you wouldn't...

With my old ball hitch I had to attach safety chains when towing on public streets and highways, with the lock and roll hitch there doesnt seem to be anywhere to connect a chain to. Is it Necessary to attach a chain with this system? | You absolutely...

Does the lock n roll 2 1/2” trailer side come with a bolt kit. If not can it be purchased separately? | The Lock N Roll Articulating Channel Tongue Trailer Coupler - 2-1/2" Channel - Trailer Side # 336TS506 you were looking at does not include...

Looking for a rotating hitch for a motorcycle trailer with a 1-7/8 coupler | While there are rotating/articulating couplers and mounts, there aren't any that work with a trailer hitch ball as that would be too much rotation, both on the coupler...

In the description for the Lock N Roll adjustable assembly 336VS507 it suggests that a standard ball coupler would fit this unit. My trailer hitch receiver is 1and 1/4 inch and I dont want to put a 2inch adapter on. Do you sell a ball assembly...

I have a crux expedition trailer that came with a bolt on poly block coupler and I want to swap to a 2 ball coupler. Is there a way to do this? Ive search for couplers and nothing seems to fit the A-Frame, so possibly a 2inch ball with a straight...

What are the torque settings on this coupler when moving it vertically up and down? Thanks | The Lock N Roll Articulating Coupler # 336TS502 will come with two 5/8" grade 5 coarse thread mounting bolts and lock nuts. These bolts have a recommended...

Is vertical adjustability required on both sides tow vehicle and trailer or just one side? | Vertical adjustability is not required on both sides. In most cases the trailer side is usually fixed # 336TS504 and the vehicle side usually has the...

I have a small Scamp trailer with A-frame tongue and ball connector. How would I connect your lock and roll articulating hitch to this A-frame set up? Am pulling trailer with 78 Landcruiser, if that makes any difference. Thanks for your help....

Hello I wish to know if there is any type of trailer coupler designed for extreme offroad. The trailer is a tear camper with a weight of 2900 lbs. The offroad terrain is sand dunes/hills. thank you very much | There is a trailer coupler...

I would like to take your Pintle hitch and lunette ring product Item # 337BP880 Item # C48560 and install them on a toy hauler RV travel trailer, in order to get better off road performance. I wanted to find out of any of your customers have...

Since this LNR has 3 stops what are they? It says max is 4.25, what are the other two? | The holes on the Lock N Roll # 336VS503505 are spaced 2" apart center on center, so you'll have 4.25" at the lowest/highest and then roughly 2" rise/drop...

I have a Toyota 4Runner with a 22” high hitch receiver, and am looking at buying a trailer with a 17” High hitch. What lock n roll hitch parts do I need to buy? Can you please send me a list of part numbers I would need to purchase? I assume...

How is the control of the trailer when youre in reverse? | The 360 degree rotation of the Lock N Roll Articulating Trailer Coupler # 336VS511, along with the left to right and up and down articulation allows fantastic maneuverability, especially...

I need to know which 6 on 5-1/2 hub and drum assembly will work with the following products I have: Timbren ASR35HDS02, and Dexter Electric Trailer Brake Kit w/ Parking Brakes - 12 | You need the Easy Grease Trailer Hub and Drum Assembly #...

what is the distance center to center from the receiver pin to the Lock n roll trailer hitch | I had our warehouse measure the Lock N Roll Articulating Hitch for 2" Receivers - 4-1/2" Drop/Rise # 336VS517 you were looking at, and from the center...

How does in tow down the interstate? Can you use a weight distribution hitch on highway! | Hey William, the Lock N Roll Articulating Hitch part # 336VS517 is going to tow really well. On the highway it would basically feel just like a standard...

What is the minimum channel specifications? 3inch wide by ?? tall. How far from the top of the channel are the center of the holes? I want to use this with a 2inch tall x 3inch wide channel. | The Lock N Roll Articulating Channel Tongue Trailer...

where on earth is the location to grease this? I cant find on either the truck or trailer side? | There isn't a grease fitting on the Lock n Roll setups like the part # 336VS501 that you referenced. Greasing it would require manual application...

I have a 1992 Fleetwood Wilderness travel trailer that has the typical A-Frame trailer coupler on front that accepts a 2 5/16inch ball....I would like to upgrade to a heavier duty coupler- my travel trailer has an upgraded suspension system...