Will Ford 5th Wheel Brackets 50043 Fit Older Reese Rails on a 2003 Ford F-250
Will these ford brackets work with a Pro Series 15000 fifth wheel hitch and rails my buddy sold me? For my 2003 F250 Super Duty extended cab? | Yes! I can tell by the picture you have provided that the rails are industry standard, 10-bolt rails...
What is the Difference Between the Ultra-Fab Stabilizer Jacks # UF48-979002 and # UF48-97006
Are these two identical, with the exception that UF48-979002 with the handle? If so, isnt it cheaper to buy the handle separately? Also, my 5er when level sits 20inch off the ground. Are these jacks the best length? Ill be using a block/pad...
Rear View Backup Camera Compatible With Ford Rear View Mirror Plugs
Hi I was wondering if you could suggest a good backup camera I have a 2016 ford f250 xlt crew cab it has the self dimming mirror is there a kit with camera and a mirror I can buy like a plug and play Im sure theres pig tails on the wire harness...
Wheel and Tire Recommendation for Bolt Pattern 8 on 6-1/2 inch
I,am looking for an trailer wheel size 15x6-8 on 6-1/2 | The smallest wheel size we offer with a 8 on 6-1/2 inch bolt pattern is 16 inch. If that's the bolt pattern your trailer has you are going to need a wheel and tire for it. So the part...
Recommendation for Weight Distribution for 2009 Ford F-250 Super Duty Towing Horse Trailer
Hi there. Im pulling a horse trailer as well as carrying a Lance Camper. The truck does pretty well, but it does sag a bit. Can you make a recommendation as to what I might install for stability? Thank you | The Timbren Rear Suspension...
Disc Brake Kit Availability Compatible with the Dexstar Conventional Steel Wheel # AM20766
I am looking for a rotor/caliper combination that works with the AM20766 wheel. What truck or trailer disc brake setup works with this wheel? | The Dexstar Conventional Steel Wheel # AM20766 has an 8 on 6-1/2 inch bolt pattern. To see a list...
7-Way Trailer Wiring Recommendation for a 1999 Ford F-250
your part number 20119 is supposed to fit a 1999 ford f250. the plug that connects to the oem harness does not at all look the same in the video as the original. mine is square wit rounded corners and has different sizes and lenght pins in it....
Tire Options for Trailer Rim that is 8 inches In Diameter and Measures 4-1/2 inches Wide
I have a ditch witch trailer that caries a load of just under 1000 pounds. The rims are 8inch and 4.5inch width. What tire size are comparable with the 4.5inch width? I see that 5.7-8 use 3.75 and 16.5-6.5 use 5.375.... What other see tires...
Comparison of Air Lift Air Helper Spring Kits Available for 2015 Ford F250 2WD
What is the difference between AL57396 and AL88395? I have a 2015 F250 2WD | There's two primary differences between the # AL57396 and the # AL88395. The AL88395 is AirLift's Ultimate Air Helper Spring, which uses integrated jounce bumpers....
Tips for Rolling the Rear Crossmember on the B&W Turnoverball Over the Shock Mount on an F-350
Have the 1108 kit for f350. Rails wont roll over and pass my shock mount so i can slide it back and begin the process... | If you take a look at the attached install video we did of the B&W Turnoverball Underbed Gooseneck Trailer part # BWGNRK1108...
Trailer Rim and ST215/75R14 Taskmaster Tire Recommendation
I am in search of a couple of spares... I need to know if I can deviate on one of them. I would really like to get a Taskmaster ST215/75R14 LR C on a silver mod rim 5 on 4 1/2 bolt pattern. Your site only shows white.... | Check out the Provider...
Are Spacers Needed to Install Timbrens on Vehicle with Leveling Kit
For a 2004 F250- I am looking to purchase a set of timbrens part # TFR250SDE. My truck rear wheel well measures out at 44.5. In the video on your website the f250 measures out at 40.75. My truck has a leveling kit on it and I want to make...
Which Pin of a Trailer 7-Way is the Ground Circuit
On the new 6-way plug that I have for trailer their no white ground wire so, whats wire would be the ground the ground wire? | Most likely your trailer has a 7-way and the reason you referred to it as a 6-way is because you didn't count the...
Brightest Interior Trailer Light Recommendation
I would like to change out my existing over head trailer dome lights with led ones so they are brighter. What are the brightest ones you carry? | For maximum brightness out of an interior trailer light I would go with the part # ILL08COB. The...
Replacement Trailer Breakaway Switch Recommendation with 7 Feet of Wiring
I need to find a break-away switch for a trailer with #12 wires at least 7foot long. I dont want to make a splice and have it in the trailer tongue. | We have the Hopking breakaway switch part # HM20010 that has 7 feet of lead wires that comes...
5th Airborne Replacement Pin Box for Lippert 1621 on 2017 Forest River Prime Time
I have a 2011 Ford 250 short bed, utilizing a BandW Turnover gooseneck under the bed hitch. We are purchasing a 2017 Forest River Prime Time 32foot 5th wheel GVWR of 11465lbs. next week, I would like this installed when we pick it up. I would...
Recommended Hitch Receiver Reducer for 2017 Ford F-250 with 3 Inch Hitch to Blue Ox Sway Pro System
Hello. I just realized last night I forgot to put the pin in the factory F250 reducer sleave and lost it somewhere on the road. Im looking for a replacement, that would reduce it from the 3inch receiver and fit my Blue Ox Sway pro system....
Installing Curt Universal Bed Rail Kit in 2003 Ford F-350 With Previously Installed Reese Kit
Ive just purchased a used 2003 Ford F-350 CCDRW with a 7.3L diesel. My question is they had a 5th wheel in the truck but removed the bed rails, they measure out the same as my F-250s bed rails. They are 40 3/4inch long 4 1/2inch wide, the question...
Front Axle Suspension Kit to Reduce Impact on Factory Jounce Spring on 2014 Ford F-250
I have a Ford F 250 2014 4 wheel drive I do not have equipment on the front I do pull about 5000 pounds on the back I am installing Firestone ride-rite on the back I Drive over speed bumps to leave and come home every day I want to install these...
Long Ball Mount to Gain Clearance Between Trailer Jack and Tow Vehicles Lift Gate
I have a funmover motorhome which is a toyhauler with a lift gate on the back. The problem is when hitched to a trailer the trailer jack is very close to the lift gate. I have part # C45900. It would be nice to be able to have the ball about...
Can This Unit Be Installed With An Auxiliary Switch To Function When Truck Is Off?
Can the unit be left on between power cycles such that I can turn it on via an aux switch on my dash, instead of flipping the switch on the unit itself? | The Performance Tool 12-Volt Heater and Defroster can be left on between power cycles...
Firestone Air Bag Recommendation for 2008 Ford F-350 with B&W Companion 5th Wheel Trailer Hitch
Will a BandW 5th Wheel Trailer Hitch Fit a 2008 Ford F-350 CC/LB SRW with Firestone RIDE-RITE Air Bags | The B&W Companion 5th Wheel Trailer Hitch, # BWGNRK1108-5W, mounts to the outside of the frame on the 2008 Ford F-350. The Firestone Ride-Rite...
Mounting Hole Spacing on Chrome Grab Handle # GH12-713
What is all the hole spacing on GH12-713 grab handle? | The hole spacing on the Steel with Chrome Finish Grab Handle, # GH12-713, is 10 inches center to center on the inner holes and 12 inches center to center for the outer holes. I have included...
Parts Needed to Upgrade the Dacromet Calipers of # K2HR526D to Stainless Steel Calipers
I have a set of 12inch Kodiac disc brakes K2HR526D. Im planning on replacing the calipers KDBC225DAC with stainless steel calipers. KDBC225S. Since the original brake kit was designed for regular calipers is there an issue? For instance do I...
Filter Your Search
Contact and Help