Result: Tail Light plug

the questions and there seems to be confusion on plugging in at the tail light or plugging in behind the bumper | I was just under my truck with a flashlight and dont see the...

if item C55504 plugs into the back of the tail light and then factory tail light wires plug | Will item C55504 work on a 2003 Dodge Ram 1500...

know that the part Im asking about plugs into the connections for the tail lights under the bumper so | Can I use the c55504 T-connector on my 2005 dodge ram 2500 to bypass the factory setup?...

in the headache rack, and 4 stop and turn in the tail board. There is also 18 side marker lights. 5 on each side | I have a 96 dodge 3500 with a flat bed. I replaced all the lights with leds. 4 stop and turn...

, or just splice in: yellow left turn, green right turn, and brown tail lights? OR......? | Questions about the best way to wire the Modulite to the factory Dodge tow wiring with 7 blade round plug. One...

is not working so I would need a kit that can be plugged into my rear tail lights. I saw your YouTube video | Hello, I need 4 flat trailer kit to installed on my 2003 ram 2500. The stock 4...

wheel. When I plug in the adapter from the truck to the trailer, my tail lights on the truck are always | I am working with a 1998 Dodge Ram pickup with a 8foot flatbed installed for shop...

You can use Curt wiring harness # C55504 which plugs in line with the tail light wiring on your | i have an 2004 dodge ram, vehicle tail, blinker and stop lights work just fine. Now onto the...

. Most trailer tail lights ground through the mounting studs unless there is an obvious ground wire | 1997 dodge 2500 has round 6 plug oulet. trailer has 4 wire plug. when i hooked it up, the tail lights,...

. The left and right side T-connectors in this harness plug in between the tail light wiring connectors | The wires in the truck are different colors then the colors in the Hopkins connector...

one ground on your trailer. It may require that each tail light have an individual ground for best | Put new lights on trailer, 4 pin, has full length ground wire Truck has 4 pin connector, no factory wiring,...

that plugs into the existing tail light assembly, with no cutting or rewiring . | I see many options on the site for wiring harness and trailer lights. What part number do I need for a 2003...

I have 2010 Dodge Ram 1500 truck. I want to add a light bar strip beneath the tail gate | I have 2010 Dodge Ram 1500 truck. I want to add a light bar strip beneath the tail gate. Is there a wiring harness...

was impossible when I had to replace my 7 pin plug. I decided to just run new wires from each tail light on my | I have a homemade trailer I got used. whoever wired it used scrap wires so tracing...

if there is a pigtail I can wire to the lights on the flatbed so that I can plug in to the factory brake/tail lights. I | I am in the process of removing the bed and installing...

vehicle. But I have no power coming to the tail lights or turn signals on the plug on the Dodge ram | 2014 dodge ram pick up. I’m having the same problem the trailer work lights work fine with...

with emory paper. There are grounds for both tail lights near the back and grounds for both forward side | Hi, I am getting really frustrated by a snowmachine trailer. I have a 95 Dodge Ram 1500 with a 7 way...

wiring harness # 18252. You will need to use the included circuit tester to test the vehicle tail light | Hi, Ive got a 1991 Dodge Ram 3/4 4x4 and a 2 axle gooseneck trailer with a 7 pin round plug. As far...

just running (tail) light signals. If you were to access the truck's factory wiring through such a 4 | I have a 2005 Dodge pickup that I have made into a portable welding rig. I am putting a flatbed on it...

, how does it send stop signal to both left and right tail lights? | I have a 2006 Dodge Ram 3500 with a 7 pin plug at the bumper and 1 - 7 pin plug 8foot away at the front of the bed. I was contemplating tying...

compared to Ram trucks. If you want to use your Ram's lights you'll have to splice with the Tail Light | Hello I am looking for a custom TOAD wiring harness for a 2004 Dodge RAM 1500. I would...

clearance lights, two tail lights. two 12volt clear lights and 6 pole connector with green brown,yellow, red | I have a horse trailer that I want to completly rewire lights...

The running lights in the headlights and tail lights work fine. The triple lites on the roof | The running lights in the headlights and tail lights work fine. The triple lites on the roof of...

The Curt Custom Fit Vehicle Wiring, # C55317, for the 1994 Dodge Ram plugs in line with the tail | I have a 94 Dodge Ram 1500, short bed, and am wanting to install wiring harness #118317. I do not have the factory...