How to Determine if Ultra-Fab T-Slot Power Drill Adapter for Scissor Jacks Will Fit Scissor Jacks
I have a trailer 2006 26 foot zeppelin which I think needs the T-slot wrench for the stabilizer jacks at the four corners. I’m interested in the one that attaches to the drill. Do they come in different sizes, or is there only one size? Does...
Solution For A 2021 Forest River Rockwood Mini Lite 2506S That Scrapes When Going Up Driveway
We have just traded in our 2013 Roo 21ss for a 2021 Minilite 2506s. We decided to “downsize” to a larger trailer as kids are getting older and my wife and I are camping alone more often than not. Minilite is 26’, Roo was 22’. Picked up the 2506s...
Trailer Hitch Mount Scooter Carrier for a 2014 Winnebago Itasca Motor Home
need to know if this carrier can hold a Motorscooter with a load of 350 lbs with a trailer receiver of 500lbs tong weight? 2014 Winnebago Itasca Navion 24ft long | Ultra-Fab carrier, # UF48-979033, weighs about 50 pounds making the combined...
Recommended Trailer Hitch Options for Rear of 5th Wheel Trailer w/ Frame Members 67 Inches Apart
I have a fifth wheel and need a universal receiver hitch that will fit a 67inch space will the reese 37042 hitch work or do you have something else. thanks | We do offer some hitches that will work for you, but I'm not finding a hitch with...
Dimensions of the Skid Wheel UF48-979015 Plate
What are the dimensions of the top plate and how far apart are the holes from one another? Thanks. | I went out into our warehouse to measure the dimensions of the plates that you asked for. I attached a picture that has all of the dimensions,...
Will Ultra-Fab Motorcycle Carrier Fit a 2005 Dodge Sprinter and a Zuma Scooter
I would like to know if I can use the UF48-0979033 to carry my Zuma 125 on my Sprinter van. My primary concern is how much length the carrier will add to my van for clearance purposes. Will I be able to enter parking lots etc. without the...
Bumper Mount Trailer Hitch for a 2005 Coachmen Spirit of America RV
Im wanting to carry a 100lb. generator with a couple cans of fuel, so total weight would be about 150 lbs.and would like to know what the typical 4inch square rear bumper is capable of holding. 2005 24ft Coachman Spirit of America the receiver...
Can Ultra-Fab Motorcycle Carrier UF48-979033 Hold Yamaha WR250R Dirt Bike on 2006 Toyota Matrix
I have a 2006 Toyota Matrix Base and a 2014 Yamaha WR250R. Will the carrier fit? Thanks a million! | The 295-lb dry weight of your Yamaha WR250R dirt bike is well within the 500-lb maximum capacity of the Ultra-Fab Motorcycle Carrier UF48-979033....
Tripod Stabilizer for a 5th Wheel Trailer with Gooseneck Adapter On It
I have a king pin stabilizer but I have the goose neck adapter on my camper can I buy a adappter to change the king pin on stabilizer and change it to the goose neck stabilizer? It just unscrews out of the top of the stabilizer | We actually...
Ultra-Fab # UF15-954730 Spare Tire Carrier for 2012 Holiday Rambler Class C Motorhome
I need a spare tire carrier for a 2012 holiday rambler class c motorhome. 16 inch rim lt225 /75r 16 tire size It has a super strong 4inch rear square bumper I see this is not big enough. | Unless your wheel has a 5 lug on a 5 inch bolt circle,...
Trailer Hitch for 2007 Thor Four Winds 5000 Motorhome on Chevy Workhorse Chassis
Need a curt receiver for a 29foot 2007 Thor Four Winds 5000 motor home with a Chevy Workhorse chassis. Can you provide the correct part number and pricing? | Curt doesn't offer a hitch specifically designed for your motorhome, but there are...
Dimensions of the Mounting Plate of the Ultra-Fab Rotating Skid Wheels
Can you give the width and length of the top plate? Thanks | I pulled a Ultra-Fab Rotating, Hitch Mounted Skid Wheel # UF48-979014 from our warehouse to measure the dimensions of the top plate and found that it measures 4-1/2 in length by 3-7/8...
What Size Installation Bolts are Included with the Ultra-Fab Skid Wheels for Low-Profile RVs
what size are the bolts uses to mount them to the frame, putting theme on a 30ft. travel trailer | I spoke to my contact at Ultra-Fab and he informed me that Ultra-Fab Skid Wheels # UF48-979011 that you referenced comes with a plate and installation...
How Do # UF48-979011 Skid Wheels Attach to RV and Do They Reduce Ground Clearance
I have a 32foot MH with metal skids. Would the wheels be an advantage over the skids and where do they attach? Another concern is would attaching the wheels reduce the already low clearance? | The skid wheels would typically weld to the underside...
Can Ultra-Fab Ultra Scissor Jack # UF48-979006 Be Used in Multiples to Level a Trailer
Could a set of these jacks, mounted to the frame, one in front and one behind the tandem tires, be used for leveling?? | Yes, the Ultra-Fab Ultra Scissor Jack # UF48-979006 that you referenced can be used in multiples to level and stabilize...
Trailer Hitch Solution for Grand Design 5th Wheel Trailer with Wider Trailer Frame
So you know if anyone has been able to use this hitch on a Grand Design 5th wheel? It looks like their frame might be 75 or 76inch . Do you know if any options for us out there? We are trying add a hitch to carry some me e-mailed we are getting....
Can Ultra-Fab Ultra Scissor Jacks Be Used without Leveling Blocks
I have a 22.5 ft, 3900 dry weight travel trailer and find backing it on to leveling blocks very difficult. If I use 4 leveling jacks, one for each corner, would I still need to use leveling blocks? | The # UF48-979002 feature oversized footplates...
Bracket Spacing of Ultra Fab 12K Fifth Wheel Landing Gear
2007 kz toy hauler 42 foot 5th wheel Spacing between factory brackets is 22 1/2inch would the ultra fab 12k jack bolt in without welding? | In order for a 'right out of the box' fit for the Ultra-Fab # UF17-943010 fifth wheel landing gear,...
Recommended Replacement Landing Gear For 1988 Fleetwood Cimarron Model 32
Hello, I have a 1988 Fleetwood Cimarron Model 32 5L 5th Wheel. My landing gear gears are trashed and would like to know if you carry replacement parts. There is no markings what so ever on the gear. If no part available and I need to replace...
Overall Height of the Ultra Fab Jack part # UF38-944037
Ultra-Fab Products Camper Jack - UF38-944037, what is the overall height retracted , and can it work upside down ? Thank you, | When the Ultra Fab Jack part # UF38-944037 is fully retracted the overall height from top to bottom is 27-1/2 inches. I...
Front Hitch and Motorcycle Carrier for KTM 790 Adventure R on a 2018 Chevy Silverado 3500 HD
Hi, Im looking at putting this front hitch on the front of my 2018 Chevy 3500 HD, which is rated for 1000 pounds of vertical load/tongue weight: 306-X7906 Id like to bring along a KTM 790 Adventure R while towing a fifth wheel RV, and this...
Picking Out Landing Gear for 2004 Crossroad Cruiser
What landing gear would fit my 2004 crossroad cruiser 5th wheel? | The easiest way to pick out replacement landing gear sets is to go by the distance between the brackets either on the trailer or on the legs themselves so that you can pick out...
Recommendations For Carrying 2 Adult Bikes and 4 Kids Bikes On a Travel Trailer
Hi! Hoping you can help with a solution for 6 bikes 2 adult size, 4 kids bikes? We tow a 36ft travel trailer gvwr=9000lbs with a 2000 ford excursion. I know bike racks for 6 bikes are few and far between, but was hoping to at least get 4 of...
Ultra Fab Power Twin Stabilizers part # UF39-941707 Weight Capacity Explained
What is the physical weight on the rear electric stabilizers? | The capacity of the Ultra Fab Power Twin Stabilizers part # UF39-941707 is 6,000 lbs which means it can support up to 6,000 lbs. So typically a camper weighs quite a bit more than...
Filter Your Search
Contact and Help