Replacement Clearance Lights and Compartment Door Hinges for a 2014 Keystone Apache
I am having difficulty locating replacement parts for a 2014 Keystone RV Apache exterior clearance lights and also compartment door hinges. Can you help? | It looks like the 4" long x 1-1/2" tall x 15/16" thick Optronics LED Trailer Clearance...
Can The Marlboro 6' Piano Hinge Be Cut In Half?
Can this hinge be cut and used as two 3foot pieces? Or would the pin come out if its cut in half? | I reached out to Marlboro Manufacturing and they informed me that it is okay to cut their 4" Wide Continuous Hinge - 6' Long # MA42VR in half....
Load Rating of Marlboro Continuous Piano Hinge
Item # MA52VR 6inch Wide Continuous Hinge - 6foot Long - 1/2inch Pin Diameter - Steel Im not seeing any information on loading capabilities. Do you have any information or should I just work with my basic knowledge of steel? | The 6" Wide...
Recommendation For Removing Surface Rust on Steel Trailer Door Hinge And Preventing Returning Rust
we have an old Logan horse trailer with piano hinges that have rust bleed. We want to clean and repaint entire trailer. What is best way to remove rust from the hinges and protect them from rusting again? | On a Steel Hinge # MA52VR you will...
Do Marlboro Continuous Hinges Come In 48" Or 96" Lengths
Im interested in purchasing item # MA94ZR.My question is this item is 72 long. Do you offer this item in a 48 or a 96 length | The stainless steel options of the Marlboro hinges only come in 72" like the # MA94ZR. You could cut this down to...
Is there A Weight Capacity for the Marlboro Continuous Piano Hinge
What is the weight limit on these hinges? Looking to make a hinged queen size murphy type bed in our cargo trailer. | Marlboro piano hinges like the 3" Wide Continuous Hinge # MA74ZR you're looking at do no have weight capacities. Marlboro mentions...
Do The Marlboro Continuous Hinges Come With Pre-Drilled Mounting Holes
I was looking at your 6 wide continuous hinge 1/2 pin diameter but in your picture I didnt see any holes for the screws or I have drill my own holes. | The 6" Wide Continuous Hinge - 8' Long - 1/2" Pin Diameter # MA32VR you referenced along...
What Size Zerk Fitting Will Replace A Damaged Lock N Roll Coupler
What size is the low profile zerk grease fitting? When the trailer hitch side was welded, the fitting was ruined. Too much heat froze the ball bearing and one cannot grease. | I spoke to Lock N Roll and they use 6mm x 1 low profile zerk...
Can 3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter Be Cut Down
I have a 1931 Essex Super Six Rat-Rod, I wanted to know if your Piano Hinge 3 wide - 3/8 pin, by 6 long could be cut to be used as door pieces? Thank You | The 3" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel part # MA75VR can...
Replacement Door Hinge For A 1992 Skyline Nomad Travel Trailer
Who sales them why is it so hard to find, I have a 92 skyline nomad , can not find door replacement LH hinges , rectangle 2by72 | With your trailer being 30 years old most parts are discontinued at this point so a lot of troubleshooting and...
Is There A 4' Long x 6" Wide Continuous Hinge With A 1/2" Pin Size Available
I need a 4’ hinge x 6” , 1/2” pin. Do you have that or do I need to buy a 6’ hinge and cut it down? Thanks | We do not currently carry a continuous hinge in a 4' length so you would need to get the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin...
How To Pick Out the Correct Replacement Piano Hinge for a Cargo Ramp Door
Looking for a heavy-duty piano hinge for a cargo trailer door ramp. 58-60 in length. Thank you | The main factor in choosing the correct replacement piano hinge is pin diameter which then in turn, denotes capacity. The hinge width and material...
Hinge for Folding Nose of Trailer
Hello, I would like assistance in ing the appropriate hinge for my application. The application is we have a 200+ lb metal cover, which will be used to protect equipment. The only support the hinges have are the front lip of the trailer, where...
Marlboro Manufacturing Continuous Hinge Material Type
Is the pinfoot also aluminum meaning that the entire hinge is made of aluminum. The intended application will be exterior and I need to avoid pins or any part of the hinge that will rust. Currently have installed a hinge not from Etrailer...
Does The Weld-On Hinge MA66ZR Have A Weight Rating?
how much weight can these hold 3 of them on a 300 lb door | The Weld-On Hinge with Stainless Steel Bushing and Pin # MA66ZR you were looking at does not have a weight rating, but I reached out to my contact at Marlboro who makes this hinge and...
Looking For Barrel Hinge For Horse Trailer Tack Room Door
Im looking for barrel Is hinge for my horse trailer tack room door. | Hello Kristine. We carry quite a few hinges and barrel hinges, so we very well may have what you need. If you can provide some dimensions for the hinge, I can take a look...
Weight Rating for Weld-On Hinge w/ Brass Bushing and Grease Zerk
What is the recommended weight that this hinge can handle? | I reached out to Marlboro Manufacturing and found that the load carrying capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk # MA89ZR is 576 lbs. |
Does Weld-On Barrel Hinge MA29ZR Have Weight Capacity? Thanks
How much weight can this hinge hold? Thanks | Hinges such as the Weld-on Barrel Hinge # MA29ZR are not given specific weight ratings as that is at the discretion of the fabricator. There's way too many variables to give a standard weight rating. I'd...
What Size Zerk Fitting is Used on MORryde Shackle Kit MR46ZR
Hello, What size is the grease fitting on the wet bolts in the shackle upgrade kit from MorRyde MR46ZR | The grease zerk fitting for the MORryde # MR46ZR is M6 x1.0. |
What Lengths Are The Marlboro 6" Wide Continuous Hinge Available In?
Do you sell something similar that is shorter? I only need one that is like 13 inches long. | The 6" Wide Continuous Hinge we currently only carry in a 6' # MA52VR and 8' # MA32VR length. The 6' length is the shortest piano style hinge we carry...
Can 3" Wide Continuous Hinge # MA75VR be Shortened
Can I shorten this hinge? | Yes, if you wanted to cut down the 3" Wide Continuous Hinge # MA75VR to shorten it you certainly could. |
Weight Rating of Butt Hinge w/ Non-Removable Pin MA87ZR
What is the suggested weight limit that this product can handle? | The Butt Hinge w/ Non-Removable Pin, # MA87ZR does not have a weight rating. |
Do Marlboro Piano Hinges Have Weight Capacity
I need to know the load limit or weight bearing in pounds for 2 different continous steel hinges. Ma75vr Ma45vr Also do you have sane time of these hinges in 3 feet length? If the 3 feet length is available what are the part numbers and weight...
Solution for Needing Replacement RV Cargo Door Hinge
Looking for cargo door hinges, for Coachman Chaparral 2017 model M-381 RD , thank you! | Usually RV cargo door hinges are piano style hinges that are between 3 and 4 feet like the part # MA85VR which is 4 foot long. This could also be trimmed...
Filter Your Search
Contact and Help